Voco Admira Fusion 5 Capsule Refills A2 15 x 0.2g (6238)

GC Initial LiSi Block CEREC Size 14 A2 HT (10004956) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A2 LT (10004958) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

Voco Grandio blocs No.14L A2 HT (6028) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco Grandio blocs No.12 A2 HT (6013) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco GrandioSO Flow Capsules A2 16x0.25g (2743) - Box16

Box (16).Flowable universal nano-hybrid restorative material – medium viscousIndications:-•Fillings of class I – V cavities•Minimally invasive filling therapy•Extended fissure sealing•Blocking out undercuts•Lining or coating cavities•Repairing fillings and veneers•Luting translucent prosthetic pieces (e.g., full ceramic crowns, etc.)•Interlocking and splinting teeth (e. g., with glass fibre strands)•Use as a base material in combination with glass fibres or similar products for fabricating semi-permanent crowns and bridgesAdvantages:-•Medium viscous flow composite, i.e. outstanding flow behaviour with complete wetting of the cavity walls•Universal application - for indication-appropriate treatment of all cavity classes•Very high filler content of over 80% w/w•Safe and precise application•12 shades for aesthetic restorations – perfectly coordinated with Grandio®SO•High shade stability through the use of the latest HDDMA technology•Very good polishability and durable brilliance•Extremely high radiopacity (500 % Al) of the shade WO for especially good contrast to the tooth substance and to other restoratives•Available in the non-dripping NDT®-syringe and Flow-caps with flexible metal cannula

Voco GrandioSO Light Flow Syringe A2 2x2g (2587) - Pack2

Pack (2).Flowable universal nano-hybrid restorative material – medium viscousIndications:-•Fillings of class I – V cavities•Minimally invasive filling therapy•Extended fissure sealing•Blocking out undercuts•Lining or coating cavities•Repairing fillings and veneers•Luting translucent prosthetic pieces (e.g., full ceramic crowns, etc.)•Interlocking and splinting teeth (e. g., with glass fibre strands)•Use as a base material in combination with glass fibres or similar products for fabricating semi-permanent crowns and bridgesAdvantages:-•Medium viscous flow composite, i.e. outstanding flow behaviour with complete wetting of the cavity walls•Universal application - for indication-appropriate treatment of all cavity classes•Very high filler content of over 80% w/w•Safe and precise application•12 shades for aesthetic restorations – perfectly coordinated with Grandio®SO•High shade stability through the use of the latest HDDMA technology•Very good polishability and durable brilliance•Extremely high radiopacity (500 % Al) of the shade WO for especially good contrast to the tooth substance and to other restoratives•Available in the non-dripping NDT®-syringe and Flow-caps with flexible metal cannula

Voco VisCalor Bulk Capsules A2 16x0.25g (6067) - Pack16

Pack (16). Thermoviscous bulk fill composite The worlds first nanohybrid composite specially designed for heating up. As VisCalor bulk is heated using a preheating device for composites, it becomes less viscous, allowing for application similar to that for a flowable material. The material flows optimally on cavity walls and undercut regions. The material quickly cools back down to body temperature and can immediately be sculpted just like a packable composite. As a result, VisCalor bulk offers the benefits of both a flowable composite and a packable composite during the placement of a restoration. This allows for efficient single-phase restorations without multiple working steps for base filling, increments or covering layers. Features- Heating of the material makes it flowable for the application and then sculptable immediately afterwards (thermoviscous technology) Optimal flowing to margins and undercut regions – minimises risk of marginal gaps 4 mm bulk fill without covering layers Bubble-free application One universal and three aesthetic shades Slender cannula – ideal for hard-to-reach areas Indications- Class I and II posterior restorations Base in class I and II cavities Class V restorations Locking, splinting of loose teeth Repairing veneers, enamel defects and temporary C&B-materials Extended fissure sealing Restoration of deciduous teeth Core build-up

Voco Grandio Flow Capsules A2 20x0.25g (1881) - Pack20

Pack (20). Flowable universal nano-hybrid restorative Indications:- Filling small class I cavities Extended fissure sealing Blocking-out of undercuts Lining, coating of cavities (CBF technique, lining technique) Restorations class II to V Repair of fillings and veneers Luting of translucent prosthetic pieces (e.g. porcelain-only crowns, veneers) Advantages:- Optimal flowability High filler degree of 80.2% w/w Exact shade match to Grandio® Excellent wetting properties Microhybrid composite – like physical properties Significantly lower polymerization shrinkage than conventional flowables Very good abrasion resistance High transverse strength Can be used with all conventional bonding agents The shades BL (Bleach light) and WO (White opaque) fulfil special indications: Bleach light is suited for bleached teeth and for use in paediatric dentistry. The shade White opaque makes an ideal restoration base on e.g. discoloured dentine areas and in core build-up.

Danville StartFlow Flowable Composite A2 5g (85052) - Each

Each. StartFlow is a light-cure, highly filled flowable composite for anterior and posterior restorations, low wear applications, cavity liner and conservative restorations. Radiopaque Sub-micron particle size gives superior polishability and resistance to staining True Vita shade match Non-sticky Fluoride slow release and natural fluorescence

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A16/5

Pack (5). 644368 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A14/5

Pack (5). 678785 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max ZirCAD CER/in.MT Mul. A2 B45/3

Pack (3). 694542 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS e.max ZirCAD CER/inLab LT A2 C17/5

Pack (5). 686194 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab HT A2 I12/5

Pack (5). 602521 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.HT Blocks – higher translucency and chameleon effect. Lower brightness values. Indications: inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40/3

Pack (3). 634587 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (L) A16/5

Pack (5). 644385 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 B32/3

Pack (3). 648205 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40L/3

Pack (3). 648871 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A2

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Voco Structur 3 Cartridge Refill A2 50ml (2504) - Each

Each. Self-curing composite material for the fabrication of provisional crowns and bridges Indications:- Fabrication of temporary crowns, bridges, inlays, onlays, partial crowns, veneers and temporary posts Fabrication of long-term temporaries Lining of pre-fabricated temporary crowns made from composite materials, polycarbonate or metal Advantages:- Processing quick, simple and reliable thanks to the 1:1 cartridge system short setting time elastic phase allows simple removal from the prepared tooth gloss without polishing - only requires removal of the inhibition layer Aesthetics natural gloss and fluorescence available in 8 shades Durability high compressive strength excellent fracture resistance Includes mixing tips, type 6

Voco Structur 3 Cartridge Set A2 50ml (2500) - Each

Each. Self-curing composite material for the fabrication of provisional crowns and bridges Processing quick, simple and reliable thanks to the 1:1 cartridge system short setting time elastic phase allows simple removal from the prepared tooth gloss without polishing – only requires removal of the inhibition layer Aesthetics natural gloss and fluorescence available in 8 shades Durability high compressive strength excellent fracture resistance Indications Fabrication of temporary crowns, bridges, inlays, onlays, partial crowns, veneers and temporary posts Fabrication of long-term temporaries Lining of pre-fabricated temporary crowns made from composite materials, polycarbonate or metal

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Sirona CEREC Blocs C PC 14 A2C (6484682) - Pack8

Pack (8). Polychromatic – for natural-looking anterior and posterior crowns CEREC Blocs C PC are optimized for the use in crowns; with their three different layers based on varying degrees of color saturation (chroma) they can be optimally adapted to characteristic color gradients in restorations with respect to translucency and intensity. And all of this in Vita classical colors A1C-A3,5C. The benefits in brief: Highly esthetic posterior crowns Colors known all around the world with the Vita classical colors (A1C-A3,5C) Very easy to polish No additional glazing required, making very fast, full ceramic (chairside) treatment possible Natural-looking enamel-dentin-cervix layering For even better results, CEREC Blocs C PC can be virtually aligned in the CEREC milling preview and inLab software Used millions of times Also suitable for multiple layers

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Solventum 3M Lava Ultimate Size 12 A2-HT (2012A2-HAT) - Pack5

Pack (5). CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns. Lava Ultimate Chairside, Size I12 , HT - A2, CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns

Solventum 3M Lava Ultimate Size 14L A2-HT (1314A2-HAT) - Pack5

Pack (5). CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns. Lava CAD/CAM CEREC 14L A2-HT, Lava Ultimate Chairside, Size 14L, HT - A2, CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 I12/5

Pack (5). 602593. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14/5

Pack (5). 602599. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14L/5

Pack (5). 602605. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Voco Admira Fusion Flow Syringe A2 2x2g (2819) - Box2

Box (2). Flowable light-curing nanohybrid Ormocer® restorative material. Indications Filling of small cavities and extended fissure sealing Blocking out undercuts Lining or coating cavities Fillings of class III - V cavities Repairing fillings, veneers and temporary restorations Luting translucent prosthetic pieces Locking, splinting of loose teeth. Advantages The worldwide first purely ceramic-based flowable restorative material - pure Silicate Technology, i.e. fillers and resin matrix based purely on silicon oxide - contains no classic monomers Thanks to the most innovative ORMOCER® technology - extremely low polymerisation shrinkage (2.75 % by volume) and particularly low level of shrinkage stress in comparison to conventional flowable restorative composites - inert, so highly biocompatible and extremely resistant to discolouration “Flow on demand” – the material becomes flowable only when under pressure or in motion. When the application has been completed, it is stable enough not to flow out of the cavity. Excellent surface affinity with complete wetting of the cavity walls VOCO’s patented, non-running and non-dripping NDT®syringe ensures reliable and perfectly precise application. Undesirable loss of material is thus a thing of the past. 12 shades for aesthetic restorations – perfectly matching the shade range of the packable version, Admira Fusion Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results Compatible with all conventional bonding agents.

Voco GrandioSO Heavy Flow Caps A2 16x0.25g (2705) - Box16

Box (16). Flowable universal nano-hybrid restorative material - highly viscous. Indications Fillings of class I to V cavities Minimally invasive filling therapy Extended fissure sealing Blocking out undercuts Lining or coating cavities Repairing fillings and veneers Luting translucent prosthetic pieces (e.g. full ceramic crowns etc.) Interlocking and splinting teeth (e.g. with glass fibre strands) Use as a base material in combination with glass fibres or similar products for fabricating semi-permanent crowns and bridges Advantages Increased stability in comparison to conventional flowables, i.e. no undesirable runoff Universal application - for indication-apprpriate treatment of all cavity classes Physical properties superior to those of various other packable materials - e.g. hardness, stability, abrasion resistance Very high filler content of 83 % w/w Precise application with complete wetting of the cavity walls Precision dosing without excess for time-saving work Undercuts, approximal boxes and paragingival areas can be easily filled Ideal for use in combination with GrandTEC 13 shades for aesthetic restorations - perfectly coordinated with GrandioSO High shade stability Very good polishability and durable brilliance Available in the non-dripping NDT

Voco GrandioSO Heavy Flow Syringe A2 2g (2685) - Pack2

Pack (2). Flowable universal nano-hybrid restorative material - highly viscous Indications:- Fillings of class I to V cavities Minimally invasive filling therapy Extended fissure sealing Blocking out undercuts Lining or coating cavities Repairing fillings and veneers Luting translucent prosthetic pieces (e.g. full ceramic crowns etc.) Interlocking and splinting teeth (e.g. with glass fibre strands) Use as a base material in combination with glass fibres or similar products for fabricating semi-permanent crowns and bridges Advantages:- Increased stability in comparison to conventional flowables, i.e. no undesirable runoff Universal application - for indication-apprpriate treatment of all cavity classes Physical properties superior to those of various other packable materials - e.g. hardness, stability, abrasion resistance Very high filler content of 83 % w/w Precise application with complete wetting of the cavity walls Precision dosing without excess for time-saving work Undercuts, approximal boxes and paragingival areas can be easily filled Ideal for use in combination with GrandTEC 13 shades for aesthetic restorations - perfectly coordinated with GrandioSO High shade stability Very good polishability and durable brilliance Available in the non-dripping NDT

Voco Grandio Flow Syringe A2 2x2g (1864) - Pack2

Pack (2). Grandio Flow Flowable universal nano-hybrid restorative. Indications: Filling of smaller cavities. Extended fissure sealing. Blocking-out of undercuts. Lining, coating of cavities (CBF technique, lining technique). Restorations class III to V. Repair of fillings and veneers. Luting of translucent prosthetic pieces (e.g. porcelain-only crowns, veneers). Advantages: Optimal flowability. High filler degree of 80.2% w/w. Exact shade match to Grandio. Excellent wetting properties. Microhybrid composite – like physical properties. Significantly lower polymerization shrinkage than conventional flowables. Very good abrasion resistance. High transverse strength. Can be used with all conventional bonding agents. The shades BL (Bleach light) and WO (White opaque) fulfil special indications: Bleach light is suited for bleached teeth and for use in paediatric dentistry. The shade White opaque makes an ideal restoration base on e.g. discoloured dentine areas and in core build-up. Grandio Flow in the new NDT-syringe. NDT means non-dripping-technology. Especially for fine-flowing materials. Can be dosed and applied precisely. Without any loss of material.

Voco Admira Fusion Syringe A2 3g (2755) - Each

Each Universal nanohybrid ORMOCER® restorative material Indications :- Class I to V restorations Base in class I and II cavities Reconstruction of traumatically damaged anteriors Facetting of discoloured anteriors Correction of shape and shade for improved aesthetic appearance Locking, splinting of loose anteriors Repairing veneers, small enamel defects and temporary C&B-materials Extended fissure sealing Restoration of deciduous teeth Core build-up Composite inlays Advantages :- The worldwide first purely ceramic-based restorative material – Pure Silicate Technology, i.e., fillers and resin matrix based purely on silicon oxide – Contains no classic monomers Thanks to the most innovative ORMOCER® technology – By far the lowest polymerisation shrinkage (1.25 % by volume) and particularly low level of shrinkage stress in comparison to all conventional restorative composites – Inert, so highly biocompatible and extremely resistant to discolouration Completely universal – meeting highest demands in anterior and posterior regions – Perfect coordination of translucence with opacity for natural results – The optimal selection of shades enables highly flexible working using either the single or multiple shade system Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results Compatible with all conventional bonding agents

Voco GrandioSO Syringe A2 4g (2611) - Each

Each. Universal nano-hybrid restorative Indications:- Fillings of class I to V Reconstruction of traumatically damaged anteriors Facetting of discoloured anteriors Correction of shape and shade for improved aesthetic appearance Locking, splinting of loosened teeth Repairing veneers Restoration of deciduous teeth Core build-up under crowns Composite inlays Advantages:- Toothlike restorative for reliable restorations Very high-filler content of 89 % w/w All-purpose for the highest demands in both the anterior and posterior tooth regions Excellent light resistance Optimal coordination of opacity and translucency for results that mirror the natural tooth using only one shade Intelligent shade system with new shades GA3.25 and GA5 that make sense for every clinical situation Smooth consistency, non-sticky, best sculptability Easily polishes to a high gloss – lasting, smooth surface Compatible with all conventional bonds

Voco Admira Fusion Capsules A2 15x0.2g (2783) - Pack15

Pack (15). Universal nano-hybrid ORMOCER restorative material. Ceramic-based restorative material. Low polymerisation shrinkage (1.25% by volume) and particularly low level of shrinkage stress. Inert, so highly biocompatible and extremely resistant to discolouration. Meeting highest demands in anterior and posterior regions. Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results. Compaible with all conventional bonding agents.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A2 C14/5

Pack (5). The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1

Solventum 3M Lava Ultimate CAD/CAM Restorative CEREC 14L A2 LT - Pack5

Pack (5). 3M ESPE Lava Ultimate CAD/CAM Restorative for CEREC is a new classification of material called a Resin Nano Ceramic (RNC). Utilising 3Ms expertise in nano technology, the material is a mixture of composite and ceramic. Like a composite, the material is not brittle and is fracture resistant. Like a glass ceramic the material has excellent polish retention for lasting aesthetics. This new material can be easily milled at the chairside, polishes to a high gloss and elimates the need for a firing step after milling. Fast no-firing process for 100% true chairside workflow. Easy to mill and polish. High strength and fracture toughness for a long lasting restoration. Intra-oral adjustability with light cure composites. Lifelike aesthetics with a high polish and a high variety of shades. 10 Year Limited Warranty. Lava Ultimate Technical Product Profile, 2011

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Voco Structur 2 SC A2 75g (1480) - Each

Each. Self-curing temporary crown and bridge material in cartridges. Indications: Fabrication of aesthetic temporary crowns,bridges, inlays and onlays. Advantages: Simple and fast working steps. Less than 1 minute setting time in the mouth. Easy to shape and polish. Available in 8 shades for natural aesthetics. Long-lasting temporaries. High stability of shape and shade. Very economical.

Voco Grandio Caps A2 20x0.25g (1841) - Pack20

Pack (20). Universal light-curing nano-hybrid restorative. Indications: Restorations class I to V. Reconstruction of traumatically affected anteriors. Direct veneering of anteriors. Corrections of shape and shade for better aesthetics. Splinting, locking of teeth. Repair of veneers. Core build-up. Composite inlays. Advantages: Excellent physical properties for long-lasting restorations. Significantly lower polymerisation shrinkage than conventional composites. High filler degree of 87% w/w. Extremely high abrasion resistance. High transverse strength. Smooth consistency for convenient handling. Excellent aesthetics. Can be used with all dentine/enamel bonding agents. Available in 16 shades. Shade guide made from original material.

Voco Grandio Syringe A2 4g (1811) - Each

Each. Grandio Universal light-curing nano-hybrid restorative. Indications: Restorations class I to V. Reconstruction of traumatically affected anteriors. Direct veneering of anteriors. Corrections of shape and shade for better aesthetics. Splinting, locking of teeth. Repair of veneers. Core build-up. Composite inlays. Advantages: Excellent physical properties for long-lasting restorations. Significantly lower polymerisation shrinkage than conventional composites. High filler degree of 87% w/w. Extremely high abrasion resistance. High transverse strength. Smooth consistency for convenient handling. Excellent aesthetics. Can be used with all dentine/enamel bonding agents.

Voco Admira Caps A2 25x0.25g (2452) - Pack25

Pack (25). Light-curing Ormocer-based restorative. Indications: For cavities classes I to V. Reconstruction of traumatically affected anteriors. Veneering of discoloured anteriors. Correction of shape and shade for better aesthetics. Splinting, locking of teeth. Repair of veneers. Core build-up. Indirect inlays. Advantages: Excellent aesthetics. High biocompatibility. Proven for years. Non-sticky, easy modelling, good marginal adaptation. Lower shrinkage than conventional composites. Tooth-like thermal expansion behaviour. Excellent adhesion to dentine and enamel with Admira Bond. Abrasion-resistant and stable colours. Ideal for all cavity classes.

Voco Admira Flow Syringe A2 2x1.8g (2482) - Pack2

Pack (2). Flowable light-curing Ormocer-based restorative. Indications: Filling of small cavities. Fillings with minimally invasive preparation technique. Extended fissure sealing. Blocking-out of undercuts. Lining, coating of cavities (lining technique, CBF-technique). Cavity classes III and V. Repair of composite fillings and veneers. Luting of full ceramic restorative pieces (porcelain-only-crowns, porcelain inlays). Advantages: Optimal flowability (thixotropic): fine-flowing during application, stable in the state of rest. Stress-breaking elasticity. Exact match of translucency and shade to the packable Admira. Fine-flowing with excellent wetting capability. In Caps or syringes with small long cannulae. Biocompatible. Low shrinkage. Time-saving application.

Voco Admira Syringe A2 4g (2422) - Each

Each. Light-curing Ormocer-based restorative Indications: For cavities classes I to V. Reconstruction of traumatically affected anteriors. Veneering of discoloured anteriors. Correction of shape and shade for better aesthetics. Splinting, locking of teeth. Repair of veneers. Core build-up. Indirect inlays. Advantages: Excellent aesthetics. High biocompatibility. Proven for years. Non-sticky, easy modelling, good marginal adaptation. Lower shrinkage than conventional composites. Tooth-like thermal expansion behaviour. Excellent adhesion to dentine and enamel with Admira Bond. Abrasion-resistant and stable colours. Ideal for all cavity classes.

Voco IonoStar Molar Application Capsule A2 (2525) - Pack20

Pack (20). Indications:- Fillings of cavities without class I occlusal support. Semipermanent fillings of cavities class I and II. Fillings of lesions of the tooth neck, Class V cavities and root caries. Fillings of cavities class III. Restoration of teeth. Fund cavity / liners. Core build. Temporary fillings. Benefits:- Editable consistency by mixing time. Perfect adaptation to marginal seal and easy application. Can be shaped immediately after application, does not stick to the instrument. In the new capsule VOCO application, easy to operate without activator. The new design of the capsule facilitates access to small cavities and difficult to reach places in the mouth. High resistance to compression and abrasion. With the technology proven VOCO glass.

Voco Ionofil Molar AC Quick Capsules A2 (1634) - Box48

Box (48). Immediately packable glass ionomer filling cement in application capsules. Indications. Class I restoration (non occlusion-bearing). Long-term temporary class I and II restoration. Lining and build-up fillings. Core build-up. Restoration of deciduous teeth. Restoration of V-shaped defects and cervical enamel erosions. Advantages: Immediately packable. Non-sticky consistency. Very high abrasion resistance, compressive and transverse strength. 40% more available cement than from comparable capsules for tooth shaded restorations. Safe adhesion to dentine and enamel. Stable fillings without marginal gaps. Continuous high fluoride release. Radiopaque. Biocompatible. Tooth-like aesthetic translucency. A setting time of only 2.5 minutes makes VOCO Ionofil Molar AC Quick the perfect material for the treatment of children and impatient patients.