Perfection Plus BridgeIT Temp C&B Material A2 75g (010/1610)

Each.Temporary Crown & Bridge MaterialA self-curing material offering excellent aesthetic result combined with optimal mechanical properties making it ideal for provisional restorations.The formulation ensures low heat generation during the intra oral setting protecting against damaging the pulp.High flexural strength allows for easy placement and the compressive strength provides exceptional strength and resistance of the final restoration against masticatory forces.1:1 Ratio Cartridge System 75g and 6 Mixing Tips

GC Initial LiSi Block CEREC Size 14 A2 HT (10004956) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A2 LT (10004958) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

Voco Grandio blocs No.14L A2 HT (6028) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco Grandio blocs No.12 A2 HT (6013) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Solventum 3M Filtek Supreme Flowable Syringe A2 2x2g (6032A2) - Pack2

Designed for a wide range of indications and techniques, including injection moulding, the 3M™ Filtek™ Supreme Flowable Restorative o?ers long-lasting wear resistance and polish retention. This versatile composite resin lets you create dental restorations that meet the highest expectations with a range of 12 shades formulated to be an exact match to 3M™ Filtek™ Universal Restoratives’ and 3M™ Filtek™ Supreme XTE Universal Restoratives’ body shades. 3M Filtek Supreme Flowable Restorative

Danville StartFlow Flowable Composite A2 5g (85052) - Each

Each. StartFlow is a light-cure, highly filled flowable composite for anterior and posterior restorations, low wear applications, cavity liner and conservative restorations. Radiopaque Sub-micron particle size gives superior polishability and resistance to staining True Vita shade match Non-sticky Fluoride slow release and natural fluorescence

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A16/5

Pack (5). 644368 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A14/5

Pack (5). 678785 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max ZirCAD CER/in.MT Mul. A2 B45/3

Pack (3). 694542 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS e.max ZirCAD CER/inLab LT A2 C17/5

Pack (5). 686194 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab HT A2 I12/5

Pack (5). 602521 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.HT Blocks – higher translucency and chameleon effect. Lower brightness values. Indications: inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40/3

Pack (3). 634587 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Solventum 3M Filtek Bulk Fill Flowable Syringe A2 2g (4862A2) - Pack2

The 3M™ Filtek™ Bulk Fill Flowable Restorative uses an optimal blend of fillers and monomers designed to maximise strength, wear resistance and radiopacity and minimise shrinkage. The innovative syringe design virtually eliminates bubbles or “run-on” to give you more control for precise placement in deep restorations. "Proven performance. Easy delivery. “Discover what makes 3M™ Filtek™ Bulk Fill Flowable Restorative innovative – including its easy-to-use, ergonomic syringe.” The 3M™ Filtek™ Bulk Fill Flowable Restorative provides easy adaptation in deep restorations with little or no instrumentation, thanks to its low viscosity. An intelligent selection of monomers and fillers that provides low shrinkage and low polymerization stress produces a restorative that can be used to perform bulk fill restorations with a depth of cure of up to 4mm. This flowable composite resin filling is excellent as a bulk fill base or as a low-stress liner.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (L) A16/5

Pack (5). 644385 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Solventum 3M RelyX Unicem 2 Automix A2 Universal Value Pack (56849)

Each Contains 3 x 8.5g syringe, 30 mixing tips (regular), 20 mixing tips (wide), 15 endo tips, 5 intra-oral tips With RelyX Unicem 2, the outstanding product performance and quality of renowned RelyX Unicem is available in the Clicker dispenser and in an easy-to-use automix syringe, in addition to the Aplicap and Maxicap systems Simple and time-saving one-step solution. Only a few working steps required. No pre-treatment such as etching, priming or bonding necessary High-performing self-adhesive resin cement. RelyX Unicem 2 Cements are strong where it counts and offer high adhesion, resistance to discolouration, long-term stability and almost no post-operative sensitivities Their exceptionally simple handling, dispensing, treatment and overall working conditions make these cements a favourite for dentists who are counting on uncompromising quality Easy delivery in the Automix Syringe, provides optimal consistency for dispensing and seating with flexible dosing Also available in Clicker dispenser, delivering pre-measured doses for consistent and economical mixing Optimal consistency

Solventum 3M Filtek Universal Restorative Syringe A2 4g (6555A2) -Each

Optimized for simplicity, the 3M™ Filtek™ Universal Restorative is a universal dental composite used for long-lasting, natural-looking dental ?lings in the anterior and posterior. Available in 1 universal opacity and 8 designer shades, plus Extra White (XW), this universal composite material o?ers high-end esthetics, strength and durability in a simpler way.

Solventum 3M Filtek Universal Restorative Capsules A2 (6550A2) -Pack20

Optimized for simplicity, the 3M™ Filtek™ Universal Restorative is a universal dental composite used for long-lasting, natural-looking dental ?lings in the anterior and posterior. Available in 1 universal opacity and 8 designer shades, plus Extra White (XW), this universal composite material o?ers high-end esthetics, strength and durability in a simpler way.

GC TEMPSMART DC Cartridge A2 48ml (10001464) - Each

Each. Contains: TEMPSMART DC 48ml cartridge A2 + 16 mixing tips type II TEMPSMART is an innovative, dual-cured, bis-acrylic composite temporary crown and bridge material using micro-filled resin (MFR) and nano-filler technologies. It maintains a smooth surface after polishing because of this revolutionary combination. The high density polymer network for TEMPSMART makes it a strong material ideal for any sized provisional. This product is ideal for temporary crowns, bridges, inlays, onlays and veneers, as well as long-term temporary restorations. Key features and benefits of include: First in class fracture toughness for clinical longevity Beautiful esthetics as well as high gloss retention High flexural strength facilitates multi-unit temporization Quick working and setting times for the shortest chairside time Low plasticizer/thin oxygen inhibition layer allow for better polymerization TEMPSMART is available in two delivery systems: 48ml cartridges (1:1 ratio) available in shades: A1, A2, A3, A3.5, B1 and BW 10ml cartridge syringes available in shades: A1, A2, A3 and B1

GC TEMPSMART DC Cartridge A2 10ml (10001470) - Each

Each. Contains: TEMPSMART DC 10ml cartridge A2 + 10 mixing tips TEMPSMART is an innovative, dual-cured, bis-acrylic composite temporary crown and bridge material using micro-filled resin (MFR) and nano-filler technologies. It maintains a smooth surface after polishing because of this revolutionary combination. The high density polymer network for TEMPSMART makes it a strong material ideal for any sized provisional. This product is ideal for temporary crowns, bridges, inlays, onlays and veneers, as well as long-term temporary restorations. Key features and benefits of include: First in class fracture toughness for clinical longevity Beautiful esthetics as well as high gloss retention High flexural strength facilitates multi-unit temporization Quick working and setting times for the shortest chairside time Low plasticizer/thin oxygen inhibition layer allow for better polymerization TEMPSMART is available in two delivery systems: 48ml cartridges (1:1 ratio) available in shades: A1, A2, A3, A3.5, B1 and BW 10ml cartridge syringes available in shades: A1, A2, A3 and B1

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 B32/3

Pack (3). 648205 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40L/3

Pack (3). 648871 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A2

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Coltene Cool Temp Natural Refills A2 (5805) - Each

Each. Contains 1 x 85g cartridge and 10 x Coltène Mixing tips blue/small Temporary Automix Crown & Bridge Material. Cool Temp Natural is a temporary crown and bridge material based on bis-acryl composite. An optimized elastic phase allows the material to be easily removed after a short time in the mouth. The result is an accurate and aesthetic provisional. Available in three shades: A1, A2, A3.5. low polymerisation temperature three Fluorescent shades low shrinkage excellent polishability easy and fast processing time

DMG Luxatemp Star Automix A2 76g (110907) - Each

Each. Bis-acrylic temporary crown and bridge material. Indications:- Temporary crowns, bridges, inlays, onlays, partial crowns, veneers and long-term temporaries. Features & Benefits:- Substantially higher flexural strength and fracture toughness Improved initial hardness Great adaption and fit Outstanding esthetics and color stability Faster curing For all kinds of restoration in esthetic dentistry Customizable to meet highest esthetic needs Immediate and semi-permanent restorations High biocompatibility Suited for long term temporaries Fabrication of mock-ups Contains 1 x 76g cartridge and 15 Automix Tips.

Voco Structur 3 Cartridge Refill A2 50ml (2504) - Each

Each. Self-curing composite material for the fabrication of provisional crowns and bridges Indications:- Fabrication of temporary crowns, bridges, inlays, onlays, partial crowns, veneers and temporary posts Fabrication of long-term temporaries Lining of pre-fabricated temporary crowns made from composite materials, polycarbonate or metal Advantages:- Processing quick, simple and reliable thanks to the 1:1 cartridge system short setting time elastic phase allows simple removal from the prepared tooth gloss without polishing - only requires removal of the inhibition layer Aesthetics natural gloss and fluorescence available in 8 shades Durability high compressive strength excellent fracture resistance Includes mixing tips, type 6

Voco Structur 3 Cartridge Set A2 50ml (2500) - Each

Each. Self-curing composite material for the fabrication of provisional crowns and bridges Processing quick, simple and reliable thanks to the 1:1 cartridge system short setting time elastic phase allows simple removal from the prepared tooth gloss without polishing – only requires removal of the inhibition layer Aesthetics natural gloss and fluorescence available in 8 shades Durability high compressive strength excellent fracture resistance Indications Fabrication of temporary crowns, bridges, inlays, onlays, partial crowns, veneers and temporary posts Fabrication of long-term temporaries Lining of pre-fabricated temporary crowns made from composite materials, polycarbonate or metal

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Solventum 3M Filtek One Bulk Fill Capsules A2 (4867A2) - Pack20

Designed for posterior restorations, the unique optical properties and improved opacity of 3M™ Filtek™ One Bulk Fill Restorative o?er the simplicity of one-step, bulk ?ll composite placement — up to 5mm — without compromising aesthetics. This posterior resin composite increases restoration e?ciency and reduces stress. 3M’s TRUE nanotechnology provides exceptional polish retention for impressive results that are made to last.

Solventum 3M Filtek One Bulk Fill Syringe A2 (4866A2) - Each

Designed for posterior restorations, the unique optical properties and improved opacity of 3M™ Filtek™ One Bulk Fill Restorative o?er the simplicity of one-step, bulk ?ll composite placement — up to 5mm — without compromising aesthetics. This posterior resin composite increases restoration e?ciency and reduces stress. 3M’s TRUE nanotechnology provides exceptional polish retention for impressive results that are made to last.

Sirona CEREC Blocs C PC 14 A2C (6484682) - Pack8

Pack (8). Polychromatic – for natural-looking anterior and posterior crowns CEREC Blocs C PC are optimized for the use in crowns; with their three different layers based on varying degrees of color saturation (chroma) they can be optimally adapted to characteristic color gradients in restorations with respect to translucency and intensity. And all of this in Vita classical colors A1C-A3,5C. The benefits in brief: Highly esthetic posterior crowns Colors known all around the world with the Vita classical colors (A1C-A3,5C) Very easy to polish No additional glazing required, making very fast, full ceramic (chairside) treatment possible Natural-looking enamel-dentin-cervix layering For even better results, CEREC Blocs C PC can be virtually aligned in the CEREC milling preview and inLab software Used millions of times Also suitable for multiple layers

Solventum 3M Ketac Universal Powder A2 12g (61107) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Solventum 3M Ketac Universal Aplicap A2 (61088) - Box50

**Free product added to order after checkout.    Box (50) Glass ionomer restorative Advantages - No need for conditioner or coating - Bulk fillno need or layering - Enables fast, one-step, stress-bearing restorative solutions - Extended indications for use compared to other glass ionomer materials - Low stickiness allows easy placement - Continuously releases fluoride for 24 months - Self-adhesive - Self-cure - Available in 6 shades Indications for use - Linings for single- and multiple-surface composite fillings - Core build-up prior to crown placement - Primary tooth fillings - Stress-bearing Class I restorations with at least one additional support outside of the filling area - Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area - Cervical fillings - Single- and multiple-surface temporary fillings - Fissure sealing

Solventum 3M Lava Ultimate Size 12 A2-HT (2012A2-HAT) - Pack5

Pack (5). CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns. Lava Ultimate Chairside, Size I12 , HT - A2, CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns

Solventum 3M Lava Ultimate Size 14L A2-HT (1314A2-HAT) - Pack5

Pack (5). CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns. Lava CAD/CAM CEREC 14L A2-HT, Lava Ultimate Chairside, Size 14L, HT - A2, CAD/CAM Restorative for CEREC Resin Nano Ceramic for true chairside production of posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 I12/5

Pack (5). 602593. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14/5

Pack (5). 602599. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14L/5

Pack (5). 602605. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A2 C14/5

Pack (5). The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1

Solventum 3M Lava Ultimate CAD/CAM Restorative CEREC 14L A2 LT - Pack5

Pack (5). 3M ESPE Lava Ultimate CAD/CAM Restorative for CEREC is a new classification of material called a Resin Nano Ceramic (RNC). Utilising 3Ms expertise in nano technology, the material is a mixture of composite and ceramic. Like a composite, the material is not brittle and is fracture resistant. Like a glass ceramic the material has excellent polish retention for lasting aesthetics. This new material can be easily milled at the chairside, polishes to a high gloss and elimates the need for a firing step after milling. Fast no-firing process for 100% true chairside workflow. Easy to mill and polish. High strength and fracture toughness for a long lasting restoration. Intra-oral adjustability with light cure composites. Lifelike aesthetics with a high polish and a high variety of shades. 10 Year Limited Warranty. Lava Ultimate Technical Product Profile, 2011

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Solventum 3M Protemp 4 Intro Kit A2 (46953) - Each

Each. Protemp 4 Temporisation Material Innovative advancement of a successful product. With Protemp 4 Temporisation Material 3M ESPE has set another milestone in temporary crown and bridge materials. We have applied our expertise in nanotechnology to create the first bis-acrylic composite with a new generation of sophisticated fillers. The result is superior strength, handling and aesthetics. Reliably tough temporaries also suitable for long-term temporisation. Excellent aesthetics, a comfortable fit and easy plaque removal. Faster procedure and brilliant results without polishing or glazing.

Solventum 3M Protemp 4 Refill A2 (46956) - Each

Each. Key features: Record-breaking toughness and fracture resistance. Sophisticated filler technology provides strength and beauty. Easier and faster handling and fabrication. Smooth, glossy surface requires no polishing or glaze. Easy plaque removal to support gingival health. Indications: Crowns. Bridges. Inlays and onlays. Veneers. Long-term temporaries

Voco Structur 2 SC A2 75g (1480) - Each

Each. Self-curing temporary crown and bridge material in cartridges. Indications: Fabrication of aesthetic temporary crowns,bridges, inlays and onlays. Advantages: Simple and fast working steps. Less than 1 minute setting time in the mouth. Easy to shape and polish. Available in 8 shades for natural aesthetics. Long-lasting temporaries. High stability of shape and shade. Very economical.

Kulzer Prevision Temp A2 50g (66055527) - Each

Each. PreVISION Temp is a self-curing two-component temporary crown and bridge material, provided in the practical 10:1 automix cartridge. Its good mechanical properties allow for safe and aesthetically convincing results for a comfortable wearing time. So you and your patient can envision a representation of how the final restoration will look and feel. Simple and time-saving application Ideal mechanical properties Highly aesthetic results and excellent polishability Flouride-releasing Great fluorescence Available in 5 VITA® shades (A1, A2, A3, A3.5, B1) and BLEACH

Solventum 3M Filtek Z500 Capsules A2 20x0.2g (8021A2) - Pack20

Pack (20). Cost-Effective Filling Material. Filtek Z500 Universal Restorative is no ordinary product, but its perfect for everyday use: With reduced stickiness for optimal handling. The latest addition in the Z-family (Z100 MP, Filtek Z250, Filtek Z500). Available in eight universal shades and one opaque shade. Simple handling. Simply durable. Simply beautiful. Simple handling. Filtek Z500 is easy to sculpt and adapts well to margins and cavities. This enables you to create restorations easily and precisely. It is also noted for its non-sticky consistency, which enables you to work efficiently and comfortably. Simply durable. Anterior and posterior dental composites are exposed to a great deal of wear. Filtek Z500 shows a high resistance to abrasion in a 3-Body-Wear test. Simply beautiful. Filtek Z500 dental composite is available in eight universal and one opaque shade, enabling you to select the right shade for natural looking restorations. Of course, natural looking teeth must reta

Solventum 3M Filtek Z500 Syringe A2 4g (8020A2) - Each

inary product, but its perfect for everyday use: With reduced stickiness for optimal handling. The latest addition in the Z-family (Z100 MP, Filtek Z250, Filtek Z500). Available in eight universal shades and one opaque shade. Simple handling. Simply durable. Simply beautiful. Simple handling. Filtek Z500 is easy to sculpt and adapts well to margins and cavities. This enables you to create restorations easily and precisely. It is also noted for its non-sticky consistency, which enables you to work efficiently and comfortably. Simply durable. Anterior and posterior dental composites are exposed to a great deal of wear. Filtek Z500 shows a high resistance to abrasion in a 3-Body-Wear test. Simply beautiful. Filtek Z500 dental composite is available in eight universal and one opaque shade, enabling you to select the right shade for natural looking restorations. Of course, natural looking teeth must retain th

Solventum 3M Filtek Supreme XTE Dentine Syringe A2 3g (4910A2D) - Each

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M Filtek Supreme XTE Enamel Syringe A2 3g (4910A2E) - Each

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M Filtek Supreme XTE Body Capsules A2 (4911A2B) - Pack20

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M Filtek Supreme XTE Dentine Capsules A2 (4911A2D) - Pack10

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M Filtek Supreme XTE Enamel Capsules A2 (4911A2E) - Pack10

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M Ketac Fil Plus Aplicap A2 (55030) - Box50

Box (50). Glass ionomer restorative. Indications: Permanent class III and V restorations. Permanent class I small restorations. Primary teeth fillings. Fissure sealing. Fillings of cervical erosions. Fillings prior to crown preparation. Product Benefits: Expansion coefficient similar to tooth structure. Radiopaque. High fluoride release.

Solventum 3M Filtek Supreme XTE Body Syringe A2 3g (4910A2B) - Each

Designed for every restoration — anterior or posterior — the versatile 3M™ Filtek™ Supreme XTE Universal Restorative delivers excellent polish retention, exceptional handling and outstanding strength. This universal restorative is a fluorescent, radiopaque and opalescent resin material that lets you offer your patients dental fillings with unsurpassed esthetic results. It is available in 36 shades and 4 opacities (dentine, body, enamel and translucent).

Solventum 3M RelyX Unicem 2 Clicker A2 (56875) - Each

Each. Self-adhesive universal resin cement in the Clicker Dispenser from 3M ESPE. Indications: Permanent cementation of inlays, onlays, crowns and bridges made of Metal or porcelain-fused to metal. All-aluminia or all-zirconia strengthened core ceramic systems (e.g. Lava Crowns & Bridges). Composite, porcelain or all-ceramic. Permanent cementation of endodontic posts made of metal, reinforced composite or all-zirconia. Product Benefits: Faster, easier mixing and dispensing with accurate reproducible dosing. No pre-treatment such as etching, priming and bonding necessary. Self-adhesive with high bond strength. Indicated for all restoration materials. Very low risk of post-operative sensitivity. Consistent mixing ratios. Paste-paste formulation for easy mixing. Dual-curing.

Solventum 3M RelyX Unicem 2 Automix A2 Refill (56846) - Each

Each. For simplicity powered by performance, rely on this enhanced, next-generation formula in an easy-to-use delivery system. Refill includes one 8.5g syringe of shade A2 Universal; 15 mixing tips (regular); 5 mixing tips (wide); 5 endo tips. Benefits: Convenient dispensing. Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges

Solventum 3M Photac Fil Quick Aplicap A2 (61020) - Box50

Box (50). Light-curing glass ionomer for anterior and posterior restorations in the Aplicap System from 3M ESPE. Indications: Uncooperative patients. Primary teeth fillings. Fissure sealing. Permanent class III and V restorations. Permanent class I small restorations. Semi-permanent Class I and II restorations. Product Benefits: Versatile thanks to chemical and light curing. No conditioning required. No glaze necessary. High fluoride release. The Aplicap System offers simple handling, constant working properties and reliable quality.

Solventum 3M RelyX Unicem Aplicap A2 (56818) - Box50

Box (50). Self-adhesive universal resin cement in the Aplicap System from 3M ESPE. Indications: Permanent cementation of inlays, onlays, crowns and bridges made of: Metal or porcelain-fused to metal. All-aluminia or all-zirconia strengthened core ceramic systems (e.g. Lava Crowns &Bridges). Composite, porcelain or all-ceramic. Permanent cementation of endodontic posts made of metal, reinforced composite or all-zirconia. Product Benefits: No pre-treatment such as etching, priming or bonding necessary. Self-adhesive with high bond strength. Indicated for all restoration materials. Very low risk of post-operative sensitivity. Radiopaque. Dual-curing. Release of fluoride ions

Solventum 3M Ketac Molar Quick Aplicap A2 (56363) - Box50

Box (50). Highly viscous glass ionomer for fast setting posterior restorations in the Aplicap System from 3M ESPE. Indications: Primary teeth fillings. Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Extended fissure sealing. Class V restorations. Core build-ups prior crown placement. Base material for composite fillings. Product Benefits: High compressive strength and surface hardness. Short mixing time. Short setting time. Still enough working time. Fluoride release. Long nozzle of the capsule for a direct application.

Solventum 3M Filtek Z250 Syringe A2 4g (6020A2) - Each

Each. Universal composite for anterior and posterior restorations. Indications. Direct anterior and posterior restorations class IV Indirect inlays, onlays and veneers. Sandwich technique. Core build-ups. Splinting. Product Benefits: Universal composite with chameleon effect. Long-term clinical experience. Excellent abrasion resistance, high fracture resistance and reduced polymerisation shrinkage. Excellent marginal fit because of its solid, yet smooth consistence that is easy to model. Virtually no sticking to the instruments. Patented zirconium/ silicafiller for contrast rich radiopacity without heavy metal additives.

Solventum 3M Filtek Z250 Capsules A2 20x0.2g (6021A2) - Pack20

Pack (20). Universal composite for anterior and posterior restorations. Indications. Direct anterior and posterior restorations class IV. Indirect inlays, onlays and veneers. Sandwich technique. Core build-ups. Splinting. Product Benefits: Universal composite with chameleon effect. Long-term clinical experience. Excellent abrasion resistance, high fracture resistance and reduced polymerisation shrinkage. Excellent marginal fit because of its solid, yet smooth consistence that is easy to model. Virtually no sticking to the instruments. Patented zirconium/ silicafiller for contrast rich radiopacity without heavy metal additives.

Solventum 3M RelyX Unicem Maxicap A2 (56834) - Pack20

Pack (20). The cement with universal appeal: #1 in the U.S., trusted by dentists worldwide. Refill pack includes 20 Maxicap Capsules in Translucent shade. Benefits: Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges and 3-unit inlay/onlay bridges. Selective etching is required to increase surface area for bonding.

Solventum 3M Ketac Fil Plus Powder A2 10g (55280) - Each

Each. Glass ionomer restorative. Indications. Permanent class III and V restorations. Permanent class I small restorations. Primary teeth fillings. Fissure sealing. Fillings of cervical erosions. Fillings prior to crown preparation. Product Benefits: Expansion coefficient similar to tooth structure. Radiopaque. High fluoride release.

Solventum 3M Filtek Supreme XTE Flow Capsules A2 (6033A2) - Pack20

Pack(20). Flowable Composite 3M ESPE Filtek Supreme XTE Flowable Restorative offers flow-on-demand handling from either capsules or syringes and advantages such as: Excellent aesthetics. Unsurpassed polish retention. *Versus competitive materials tested. Low wear. Features &Benefits: The flowable you can use with confidence. 3M ESPE Filtek Supreme XTE Flowable Restorative is a low viscosity, visible light-cured, radio-opaque flowable nanocomposite. Filtek Supreme XTE flowable uses the same unique nanotechnology as 3M ESPE Filtek Supreme XTE Universal Restorative which provides excellent aesthetics, unsurpassed polish retention and low wear Shrinkage has been reduced by nearly 20% compared to Filtek Supreme XT Flowable Filtek Supreme XTE Flowable is available in 12 shades (A1, A2, A3, A3.5, A4, Opaque A3, B1, B2, C2, D2, W, XW) matching the VITAPAN Classical Shade Guide and Filtek Supreme XTE universal restorative. Indications: Base/liner under direct restorations. Undercut blockout