Zhermack Elite HD+ Monophase Medium Body (C202020) 2 x 50ml

Hydrophilic, medium viscosity A-silicone. Monophase technique with one viscosity. Suggested indications: one-component material to be used simultaneosusly both on the tray and around the preparations. Medium consistency.   Advantages:-   Ideal consistency for monophase technique Maximum precision in detail reproduction High tear strength Excellent elastic recovery High dimensional stability Opaque pigments for improved detail reading Possibility of casting the model immediately after disinfection 3-year shelf life Safe disinfection with Zeta 7 Solution and Zeta 7 Spray Characteristics:-   1:1 Mixing ratio Hydrophilic Thixotropic Ideal working time/setting time ratio (Snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Yellow colour Contains: 2 x 50ml cartridges (base & catalyst), 12 mixing tips small/yellow

Coltene Affinis System 360 Monobody (6482) - Each

Each. Contains: 2 x 300ml Base, 2 x 62ml Catalyst Affinis MonoBody is tissue friendly and neutral in taste without side effects or patient discomfort. After a short oral setting time of 3.30 min the Affinis impression can be easily removed without residue or distortion. The impression is disinfectable without dimensional changes. The high elastic recovery of 99.75% and dimensional change of just 0.2% are the essential characteristics for accurate restorations. Affinis MonoBody can also be used as the tray material for the one-step putty/wash technique.

Zhermack Hydrorise Implant Meduim Body/Viscosity (C207092)

Box (2). 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers Hydrorise Implant is a scannable radiopaque A-Silicone specific for implantology, ideal in multiple implants treatment. Characterised by a high final hardness, it allows to obtain an accurate impression that detects the three-dimensional position of the implant with precision before transferring it to the laboratory. Available in three viscosities - Heavy, Medium and Light Body - in order to combine the need for rigidity with the one for detail reproduction, it can be used with monophase (Medium Body) and simultaneous, two viscosities (Heavy and Light Body) techniques. Hydrorise Implant does not change its consistency when it comes into contact with oral fluids, and thanks to its thixotropy it does not flow in the mouth during impression taking. It has an ideal working time to allow the user to work calmly, even in the most complex cases. At the same time, setting time is short, assuring a greater comfort to the patient. It is packed with automatic mixing cartridges to simplify and speed up the mixing phase, reducing the possibility of contamination or of making mistakes during the application. Moreover, it can be used with the main impression trays on the market (standard in plastic or steel, or custom in resin). Characteristics Mixing ratio 1:1 (Hydrorise Implant Light Body 50 ml)- Mixing ratio 5:1 (Hydrorise Implant Medium Body 380 ml Hydrorise Implant Heavy Body 380 ml) High final hardness Hydrocompatibility Thixotropy High consistency Radiopacity Biocompatibility Scannability without using matting sprays Colours: Pink - Hydrorise Implant Light Body; Blue - Hydrorise Implant Medium Body; Violet - Hydrorise Implant Heavy Body Mint scented Advantages High rigidity and accuracy of the impression in transferring the threedimensional position of the implant (Heavy and Medium Body) Optimal detail reproducibility of soft tissues around the transfer (Light Body) 3 years shelf-life Snap-set effect

Solventum 3M Impregum Penta Super Quick Medium Body Value Pack (69405)

Each Contains: 6 x 300ml base paste and 6 x 60ml catalyst 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Light Body (69379) - Each

Each Contains: 4 x 50ml Cartridges, 5 x Intra-oral Syringes Purple, 5 x Garant Mixing Tips Purple 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Med Body Kit (69404)

Each Contains: 1 x 300ml base paste, 1 x 60ml catalyst &10 Penta Mixing Tips Red 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Medium Body Intro Kit (69383)

Each Contains: 1 x 300ml base paste MB, 1 x 60ml catalyst MB, 1 x Penta Cartridge MB, 10 x Penta Mixing Tips Red, 1 x Penta Elastomer Syringe, 1 x 17ml Polyether Tray Adhesive, 3 x Astringent Retraction Paste capsules 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Medium/Light Body Intro Kit

Each. 69381 Contains: 1 x 300ml base paste MB, 1 x 60ml catalyst MB, 2 x 50ml cartridges LB, 1 x Penta Cartridge MB, 10 x Penta Mixing Tips Red, 5 x Intra-oral Syringes Purple, 5 x Garant Mixing Tips Purple, 5 x Garant Intra-oral Tips White, 1 x 17ml Polyether Tray Adhesive, 3 x Astringent Retraction Paste capsules, 6 x Impression Trays 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Medium Body Cartridge PMX 3

Each. 69387 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Garant Mixing Tips for Impregum Super Quick Purple 71454

Pack (50) 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Solventum 3M Impregum Penta Super Quick Medium Body Refill (69385)

Each Contains: 2 x 300ml Base Paste, 2 x 60ml Catalyst 3M Impregum Super Quick Polyether Impression Material. The first superfast polyether designed for faster high-precision impressions in less complex cases. For monophase and 1-step impression techniques Superfast polyether with 45 seconds working time and quick 2-minute setting Excellent performance in moist situations and great flow behaviour High level of accuracy and detail reproduction for high-precision restorations Improved fresh, minty taste and smell for more patient comfort Scannable with the current generation of scanners Available in medium and light body consistencies Suggested Applications:- Single-unit crown impressions Single-unit implant impressions Inlay/onlay impressions Smaller bridge impressions (up to 3 units)

Coltene President The Original Regular Body 2x50ml -60019939

Pack (2). PRESIDENT The Original regular body is a medium viscous wash material for the two-phase impression technique with optimal thixotropy On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body 2x75ml (60019941)

Pack (2). No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body System 360 Kit

Each. 60019947 PRESIDENT The Original Heavy Body System 360 Starter Kit:- Contains: 1 × 380 ml cartridge, 10 × Dynamic Mixing Tips, 1 × Fixation Ring No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body System 360 2x380ml

Pack (2). 60019948 PRESIDENT The Original Heavy Body System 360 Refill:- Contains: 2 × 380 ml cartridge No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty 2x300ml (60019942)

Pack (2).  Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty Soft 2x300ml (60019943)

Pack (2).  Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Fast Putty Soft 2x300ml

Pack (2). 60022166 Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty Super Soft 2x300ml

Pack (2). 60019944 Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Monobody System 360 Kit

Each. 60019945 PRESIDENT The Original Monobody System 360 Starter Kit:- Contains: 1 × 380 ml cartridge, 10 × Dynamic Mixing Tips, 1 × Fixation Ring With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Monobody System 360 2x380ml

Pack (2). 60019946 PRESIDENT The Original Monobody System 360 Refill:- Contains: 2 × 380 ml cartridge With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Xtra Light Body 2x50ml

Pack (2). 60019937 PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Light Body 2x50ml (60019938)

Pack (2). PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Light Body 2x53ml (60019949)

Pack (2). PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Perfection Plus Impress Plus Wash Monophase Body Fast Set

Box (2). Purple. 2 x 50ml Cartridges, 6 Yellow Mixing Tips & 6 Intra Oral Tips A vinyl polysiloxane material with excellent tear strength to maintain impression integrity on removal. Produces precise dental impressions, eliminating remakes.

Solventum 3M Elastomer Syringe with Filling Device (71209) - Each

Each. Refill includes one elastomer syringe with three replacement tips and filling device. Provides easy syringing of light body handmix impression material around the teeth. Thixotropic: it flows smoothly under pressure in critical areas and remains fixed without pressure. Snap-set properties reduce the potential for distortion during the setting process and removal from the mouth to assure a precise-fitting final restoration. Polyether material characteristics guarantee impressions of the highest precision. Monophase impression technique; just one viscosity for tray and syringe. Monophase impression technique; just one viscosity for tray and syringe.

Solventum 3M Impregum F Catalyst 15ml (31473) - Each

Each. For those who prefer a hand-mix formulation, this medium body polyether material offers high-precision impressions. Hydrophilic before, during and after the set for unsurpassed accuracy, even in the presence of moisture. Thixotropic: it flows smoothly under pressure in critical areas and remains fixed without pressure. Snap-set properties reduce the potential for distortion during the setting process and removal from the mouth to assure a precise-fitting final restoration. Polyether material characteristics guarantee impressions of the highest precision. Monophase impression technique; just one viscosity for tray and syringe. Monophase impression technique; just one viscosity for tray and syringe.

Solventum 3M Impregum F Base Paste 120ml (31503) - Each

Each. For those who prefer a hand-mix formulation, this medium body polyether material offers high-precision impressions. Hydrophilic before, during and after the set for unsurpassed accuracy, even in the presence of moisture. Thixotropic: it flows smoothly under pressure in critical areas and remains fixed without pressure. Snap-set properties reduce the potential for distortion during the setting process and removal from the mouth to assure a precise-fitting final restoration. Polyether material characteristics guarantee impressions of the highest precision. Monophase impression technique; just one viscosity for tray and syringe.

Zhermack Elite HD+ Maxi Mono MB Normal Set 2x380ml (C202300)

Box (2). Hydrophilic medium body A-silicone for use in automatic mixing machines 5:1 . Monophase technique with one viscosity. Suggested indications: one-component material to be used simultaneously both on the tray and around the preparations. Medium consistency. Advantages: Ideal consistency for the monophase technique. Maximum precision in detail reproduction. High tear strength. dimensional stability. Excellent elastic recovery. High dimensional stability. Opaque pigments for improved detail reading. Possibility of casting the model immediately after disinfection. 3-year shelf life. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. Characteristics: 5:1 Mixing ratio. Hydrophilic. Thixotropic. Biocompatible. Ideal working time/setting time (Snap-set effect): - Long working time. - Shorter permanence in the oral cavity. Yellow colour.

Solventum 3M Impregum F Medium Bodied Refill Pack (31710) - Each

Each. The medium body polyether impression material, in a hand-mix formulation, offers high precision and is intended for use in the monophase technique