CLEARANCE - Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A3

This is a clearance item and is only available at this one-off price while stocks last.

CLEARANCE - Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT B1

This is a clearance item and is only available at this one-off price while stocks last.

CLEARANCE - Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL3

This is a clearance item and is only available at this one-off price while stocks last.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 Multi A3.5

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   Multi Blocks – Lifelike transition of shade, translucency and fluorescence. Indications: anterior and posterior crowns, partial crowns & veneers.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B1

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B2

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C16 LT A2

Pack (5)   IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).   The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.   Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A1 C14/5

Pack (5). 602567 The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1-BL4). Multi blocks. The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and the E4D* Dentist System (D4D). Advantages Twenty years of clinical experience with more than 40 million seated restorations. Leucite glass-ceramic (160 MPa) for exceptional esthetics. Comprehensive shade and size range for every patient situation. Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient. Polishing with OptraFine – no glazing necessary. Indications: Veneers, inlays, onlays, anterior and posterior crowns.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14L

Pack (5). 607672 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14/5

Pack (5). 607683 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14/5

Pack (5). 607684 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14L

Pack (5). 607673 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL3

Pack (5). 680033 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT B1

Pack (5). 680031 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL2

Pack (5). 680032 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL4

Pack (5). 680034 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A1

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A2

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A3

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A3 C14/5

Pack (5). 602600 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A3 I12/5

Pack (5). 602594 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 I12/5

Pack (5). 602593. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 C14/5

Pack (5). 602598. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14/5

Pack (5). 602599. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 C14L/5

Pack (5). 602604. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14L/5

Pack (5). 602605. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 I12/5

Pack (5). 602592. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent Programat CS3 Furnace (681117) - Each

Each. Programat CS3 Power cord Vacuum hose Programat firing tray kit Automatic temperature checking set ATK 2 (test set) USB download cable Programat USB flash drive Programat WLAN kit Firing tong holder DSA Holder kit A–D shade guide. Power supply 100 V, 50 – 60 Hz 110 – 120 V, 50 – 60 Hz 200 – 240 V, 50 – 60 Hz Admissible voltage fluctuations ±10 % Max. power consumption 14 A at 100 V 12 A at 110 – 120 V 8.5 A at 200 – 240 V Data for vacuum pump Max. power consumption: 250 W / max. leakage current 0.75 mA Final vacuum: < 50 mbar Only tested pumps can be used. Dimensions of Depth: 465 mm closed furnace Width: 320 mm / 390 mm (with cooling tray) Height: 320 mm Usable size Diameter: 90 mm of the firing chamber Height: 80 mm Max. firing temperature 1,200 °C Weight Base: 15.6 kg

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B1 C14/5

Pack (5). IPS e.max CAD inLab HT Blocks are highly translucent and used to machine minimally invasive full-contour restorations, for example, inlays, onlays and veneers. These restorations are subsequently characterized with staining materials. HT Blocks in the size B40 are available for the IPS e.max CAD-on technique. Efficient, economical processing due to easy machinability. High strength (360 MPa) and high level of esthetics. Fabrication of a crown in one hour. Minimally invasive restorations. Adhesive, self-adhesive and conventional cementation. Fabrication of a complete zirconium oxide-based bridge in one day.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B2 C14/5

Pack (5). IPS e.max CAD inLab HT Blocks are highly translucent and used to machine minimally invasive full-contour restorations, for example, inlays, onlays and veneers. These restorations are subsequently characterized with staining materials. HT Blocks in the size B40 are available for the IPS e.max CAD-on technique. Efficient, economical processing due to easy machinability. High strength (360 MPa) and high level of esthetics. Fabrication of a crown in one hour. Minimally invasive restorations. Adhesive, self-adhesive and conventional cementation. Fabrication of a complete zirconium oxide-based bridge in one day.