Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL3

Pack (5). 680033 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT B1

Pack (5). 680031 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL2

Pack (5). 680032 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL4

Pack (5). 680034 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A1

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A2

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A3

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent Tetric EvoFlow Syringe B1 2g (641358) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent.  Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations.  Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Fluor Protector S Refill 7g (639520) - Each

Each.   The protective fluoride varnish provides superior protection against dental caries and erosion.   The innovative varnish system of Fluor Protector S featuring a homogeneously dissolved fluoride source ensures immediate availability of the fluoride. The entire dose of fluoride contained in Fluor Protector S is available in a very short time. As a result, dental enamel is directly and effectively supplied with fluoride. The low viscosity of the varnish is responsible for its optimum flow and wetting properties.   Indications Treatment of hypersensitive cervicals Improvement of enamel resistance against acid Long-term caries prophylaxis Treatment of possible sensitivity after tooth whitening Advantages 7700 ppm fluoride in a homogeneous solution; approx. four-times higher concentration after setting Mild flavour, mild smell Multi-dose and single-dose units Benefits for the practice team Immediately ready for use, instant fluoride availability Controlled, dosed topical fluoride application Recommended for children and sensitive patients

Ivoclar Vivadent Tetric EvoFlow Cavifil A3.5D (595994)

Pack (20). 20x0.2g. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Cavifil Bleach XL (595995)

Pack (20). 20x0.2g. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A3.5D 2g (595980)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe B3 2g (595957) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach L 2g (595982)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach M 2g (595984)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach XL (595981)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A3.5 2g (595956)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A4 2g (595978) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Multilink Automix Refill White Easy 645952

Each. Multilink Automix is a truly multipurpose luting cement indicated for cementation of indirect restorations (inlays, onlays, crowns, bridges, and posts) made from a variety of restorative materials including metal, ceramics, composites and precious metal alloys. Multilink Automix is now available in a new “Easy Clean-Up” formula for situations where pre-curing excess cement is preferred. The new “Easy Clean-Up” formulation allows excess material to be light-cured for 1-2 seconds per quarter surface (mesio-oral, disto-oral, mesio-buccal, disto-buccal), transforming the material to a gel-like consistency for fast, easy removal. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent Tetric EvoFlow Syringe A1 2g (595953WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A2 2g (595954WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A3 2g (595955WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Multilink Automix Refill Trans Easy 615216

Each. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent Multilink Automix Refill Y Easy (615217)

Each. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent Multilink Automix Refill O Easy (615218)

Each. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent Email Preparator Blue Cannulas (533666)

Pack (20). Email Preparator Blue Plastic Cannulas are application tips for Email Preparator blue etching sealant.

Ivoclar Vivadent MultiCore Flow Light Refill 10g (604166)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.

Ivoclar Vivadent MultiCore Flow Medium Refill 10g (604167)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.

Ivoclar Vivadent MultiCore Flow White Refill 10g (604168)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.

Ivoclar Vivadent Helioseal/Heliobond Cannulas (533669) - 20

Pack (20). For Helioseal, Heliobond, Etchant.