Ivoclar Vivadent ExciTE F Single Dose Regular 0.1ml (759134)

Pack (50). ExciTE F is a light-curing, fluoride releasing, single- component total-etch adhesive. It is used in the  placement of direct restorations (composites,  compomers) as well as in the adhesive luting of  indirect restorations (all-ceramics, composites)  involving light-curing. ExciTE F is available in the  unique VivaPen, in bottles or in Soft Touch Single  Dose vessels. Advantages: Available in bottles and Soft Touch Single Dose vessels Reliable adhesion, as ExcitTE F establishes a strong bond to enamel and dentine Consistent quality due to its acetone-free chemistry Fluoride release Reduced postoperative sensitivity because dentin surfaces are effectively sealed Versatile system – Accurate fit of indirect restorations due to the low film thickness Indications: Direct light- and dual-cure composite and compomer restorations Adhesive luting of indirect restorations involving light-curing

Ivoclar Vivadent Tetric plus Fill Syringe 3g A2 plus

Each. Tetric plus Fill – handling tailored to your needs. More than 90% of the dentists rated the handling as "very good" or ""good" [1]: Sculptable viscosity that adapts well to cavity walls 92% of dentists reported high satisfaction with the cushioning effect [2] Viscosity can be adjusted by heating if desire Tetric plus meets all critieria essential for high-quality composites. 4 unique shades for easy shade matching With Tetric plus, 4 shades are sufficient to cover all VITA* classical shades and Bleach. The simplified universal composite offers esthetics that are suitable for all cavity classes. 4-filler technology for high-quality performance and proven handling Tetric plus matches conventional composites in every way - it meets all your requirements, including a handling process that receives 90 percent of dentists commend highly. [3] 4 mm for higher efficiency. 4 shades for greater simplicity. Tetric plus combines layer thicknesses of up to 4 mm [4] with a universal range of applications. Easy shade selection and consistent curing times facilitate your treatment workflow. In short: With Tetric plus, you can save time and money. *Not registered trademark of Ivoclar Vivadent AG. [1] [2] Internal study based on over 170 participants. [3] Internal study based on over 170 participants. More than 90 of participants rated the handling as “very good” or “good”. [4] Apply the shade A3.5 plus with a maximum layer thickness of 3.5 mm and light cure for 3s or 5s.

Ivoclar Vivadent Adhese Universal Vivapen 3.0 Kit - Each

Adhese Universal is a single-component, light-cured adhesive for direct and indirect bonding procedures. It is the only universal bonding agent available in the efficient VivaPen delivery form.   Universally suitable for direct and indirect bonding procedures and all etching protocols Consistent high bond strength (> 25 MPa) on wet and dry dentine Integrated desensitising effect for minimising the risk of postoperative sensitivity Efficient VivaPen: up to three times more applications per ml compared with conventional bottles Kit contains:   1 x 2ml Adhese Universal VivaPen 100 x VivaPen snap-on cannulas 20 x VivaPen protective sleeves

Ivoclar Vivadent Bluephase G4 100-240V Grey (691258) - Each

Each. Intelligent LED light – carefree curing Patented Polyvision technology is your personal assistant when it comes to curing dental materials. This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends the exposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automatically interrupt the exposure cycle so that it can be repeated. Bluephase G4 comes with active anti-glare protection to prevent the light from being activated in open space. Additional advantages: Reliable curing performance  for all light-curing materials due to polywave LED Short curing times starting from 10 seconds due to a high intensity of 1,200 mW/cm2 Wide 10-mm light guide for time-saving single-exposure curing procedures Additional Pre-Cure program for the removal of excess cement Delivery forms 691258 Bluephase G4 691257 Bluephase G4 with Click & Cure and integrated radiometer

Ivoclar Vivadent Bluephase G4 100-240V Grey & Radiometer

Each. Intelligent LED light – carefree curing Patented Polyvision technology is your personal assistant when it comes to curing dental materials. This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends the exposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automatically interrupt the exposure cycle so that it can be repeated. Bluephase G4 comes with active anti-glare protection to prevent the light from being activated in open space. Additional advantages: Reliable curing performance  for all light-curing materials due to polywave LED Short curing times starting from 10 seconds due to a high intensity of 1,200 mW/cm2 Wide 10-mm light guide for time-saving single-exposure curing procedures Additional Pre-Cure program for the removal of excess cement Delivery forms 691258 Bluephase G4 691257 Bluephase G4 with Click & Cure and integrated radiometer

Ivoclar Vivadent Bluephase Powercure 100-240V (667092) -Each

Each. Product Features- 3sCure Program: Light intensity of 3,000 mW/cm² for curing times starting from 3 seconds Turbo Program: Light Intensity of 2,000 mW/cm² for curing times starting from 5 seconds High Power program: Light intensity of 1,200 mW/cm² for curing times starting from 10 seconds Cordless design for ultimate mobility in the dental office Intuitive handling with 2-button operation Inductive charging of the battery, no contaminated charging contacts Charging base with information of the charging status High-performance lithium ion battery for an operating capacity of 20 min. within the High Power program Light guide: shortened and autoclavable 3-year warranty (battery 1 year) Homogeneous light emission performance Backlit display for optimized hygiene Radiometer integrated in the charging base Optional corded operation with "Click & Cure"

Ivoclar Vivadent Silicone Anti-glare Cone 3 Pack (551756)

Each. Anti-glare cone, compatible with all Bluephase models

Ivoclar Vivadent Bluephase Style Battery (637692) - Each

Each. Bluephase Style is on an ergonomic mission. Whilst it is grounded in the proven technologies of the Bluephase range, it incorporates optimized features. Bluephase Style offers a high light intensity (new at 1,200 mW/cm2) for short curing times as well as a compact and ergonomic shape that comfortably fits the hands of women and men. Advantages Polywave LED with halogen-like broadband spectrum of 385 to 515 nm Suitable for all materials Large treatment field due to 10-mm light probe Shortened light probe, enabling access to all tooth surfaces without extreme opening of the mouth Click & Cure for battery-independent emergency corded operation Available in 4 colors: grey, pink, blue and now also in green

*Ivoclar SpeedCEM Plus Refill Transparent 9g - Each

*this product is temperature controlled, and therefore is not able to be returned for credit. Please store this product in the fridge between 2-8°C* Each. 681712. Contains 1 Automix syringe SpeedCEM Plus transparent 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

*Ivoclar Vivadent SpeedCEM Plus Refill Opaque 9g - Each

*this product is temperature controlled, and therefore is not able to be returned for credit. Please store this product in the fridge between 2-8°C* Each. 681711. Contains 1 Automix syringe SpeedCEM Plus opaque 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

Ivoclar Vivadent SpeedCEM Plus Refill Yellow 9g - Each

Each. 681710. Contains 1 Automix syringe SpeedCEM Plus yellow 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

Ivoclar Vivadent Variolink Esthetic Try-In Paste Light+ 1.7g

Each. 666067   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Variolink Esthetic Try-In Paste Light 1.7g

Each. 666113   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Variolink Esthetic TryIn Paste Neutral 1.7g

Each. 666114   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Programat CS3 Furnace (681117) - Each

Each. Programat CS3 Power cord Vacuum hose Programat firing tray kit Automatic temperature checking set ATK 2 (test set) USB download cable Programat USB flash drive Programat WLAN kit Firing tong holder DSA Holder kit A–D shade guide. Power supply 100 V, 50 – 60 Hz 110 – 120 V, 50 – 60 Hz 200 – 240 V, 50 – 60 Hz Admissible voltage fluctuations ±10 % Max. power consumption 14 A at 100 V 12 A at 110 – 120 V 8.5 A at 200 – 240 V Data for vacuum pump Max. power consumption: 250 W / max. leakage current 0.75 mA Final vacuum: < 50 mbar Only tested pumps can be used. Dimensions of Depth: 465 mm closed furnace Width: 320 mm / 390 mm (with cooling tray) Height: 320 mm Usable size Diameter: 90 mm of the firing chamber Height: 80 mm Max. firing temperature 1,200 °C Weight Base: 15.6 kg

Ivoclar Vivadent Adhese Universal VivaPen Refill 2ml - Each

Each. Adhese Universal is a single-component, light-cured adhesive for direct and indirect bonding procedures that features compatibility with all etching techniques: self-etch, selective-enamel-etch and total-etch. Adhese Universal is available in the unique VivaPen delivery form for fast and convenient direct intra-oral application with minimal waste to optimize cost-effectiveness. Indications: Direct-placed light-curing composite and compomer restorations. Core build-ups with light-, self- and dual-curing composites. Adhesive cementation of indirect restorations with light and dual-curing luting composites. Intraoral repair of fractured composite and compomer restorations. Desensitization of hypersensitive cervical areas. Sealing of prepared tooth surfaces before temporary / permanent cementation of indirect restorations. Advantages: Efficient delivery – up to 190 single-tooth applications per 2ml VivaPen* Universal application – for all bonding and etching techniques Predictable results – high bond strength on dentin and enamel

Ivoclar Vivadent Bluephase Style Sleeves Refill (636239)

Pack (50) . Bluephase Style protective sleeves.

Ivoclar Vivadent Silamat S6 100-240v (602286) - Each

Each. The Silamat S6 is a modern universal mixing device for amalgam, glass ionomer cements and other predosed dental materials in capsules and injection capsules. The Silamat S6 universal mixing device combines function with an attractive design. Thanks to its rounded shape and the removable cover the unit can be cleaned easily. The patented and time-tested Silamat technology featuring the special “figure-eight mixing pattern” and above-average rotation speed of 4,500 rpm help to achieve reliable and homogeneous mixing results. The Silamat S6 can be used to mix the contents of all popular capsules and injection capsules in various shapes and sizes. The capsule is easy to load from above with one swift hand movement, the mixing time is set and the mixer is started. That’s it. Advantages: Esthetic design. Homogeneous mixing. Universal use. Easy operation.

Ivoclar Vivadent Bluephase G2 Sleeves (608554) - Box250

Box (250). Protective Sleeves for the Bluephase G2 and Bluephase i20 curing lights.

Ivoclar Vivadent Multilink Automix Refill White Easy 645952

Each. Multilink Automix is a truly multipurpose luting cement indicated for cementation of indirect restorations (inlays, onlays, crowns, bridges, and posts) made from a variety of restorative materials including metal, ceramics, composites and precious metal alloys. Multilink Automix is now available in a new “Easy Clean-Up” formula for situations where pre-curing excess cement is preferred. The new “Easy Clean-Up” formulation allows excess material to be light-cured for 1-2 seconds per quarter surface (mesio-oral, disto-oral, mesio-buccal, disto-buccal), transforming the material to a gel-like consistency for fast, easy removal. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent MultiCore Flow Light Refill 10g (604166)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.

Ivoclar Vivadent MultiCore Flow Medium Refill 10g (604167)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.

Ivoclar Vivadent MultiCore Flow White Refill 10g (604168)

Each. The self-curing MultiCore core build-up composite, which may be optionally light cured, brings flexibility to your dental practice. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing. Advantages: A suitable consistency for every technique. MultiCore HB for the moulding technique. MultiCore Flow for the matrix technique. Based on Ivoclar Vivadent's long-term experience in the field of composite technology. A suitable option for every case: Self or light-curing and 4 different shades: light, medium, white and blue. Forms a coordinated system with the self-etching bonding agent AdheSE. Indications: Core build-up in vital and non-vital teeth.