Zhermack Elite HD+ Monophase Medium Body (C202020) 2 x 50ml

Hydrophilic, medium viscosity A-silicone. Monophase technique with one viscosity. Suggested indications: one-component material to be used simultaneosusly both on the tray and around the preparations. Medium consistency.   Advantages:-   Ideal consistency for monophase technique Maximum precision in detail reproduction High tear strength Excellent elastic recovery High dimensional stability Opaque pigments for improved detail reading Possibility of casting the model immediately after disinfection 3-year shelf life Safe disinfection with Zeta 7 Solution and Zeta 7 Spray Characteristics:-   1:1 Mixing ratio Hydrophilic Thixotropic Ideal working time/setting time ratio (Snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Yellow colour Contains: 2 x 50ml cartridges (base & catalyst), 12 mixing tips small/yellow

Zhermack Zeta 7 Solution Concentrate 1L (C810048) - Each

Each. Aldehyde-free, concentrated, broad spectrum disinfectant. Lemon fragrance. Applications:- Zeta 7 solution is specially formulated for the rapid, high-level disinfection of impressions in silicone, alginate, polyether and polysulphur It does not alter the impressions or change their shape or size, and is fully compatible with plasters Uses:- 1% solution: immediately after taking the impression, rinse under running water for 30 seconds Immerse the impression in a 1% solution of Zeta 7 Solution for 10 minutes. Add 10ml of Zeta 7 Solution to each litre of water using the practical dispenser cap Remove the impression from the bath and rinse it thoroughly 1 litre of Zeta 7 Solution = 100 litres of disinfectant solution Spectrum:- Bactericidal: EN 13727 (S. aureus, P. aeruginosa, E. hirae) Fungicidal: EN 13624 (C. albicans) Tubercolicidal: EN 14348, EN 14563 (M. terrae) Virucidal, including HIV, HBV, HCV: EN 14476 (Poliovirus, Adenovirus, Parvovirus)

Zhermack Hydrorise Implant Meduim Body/Viscosity (C207092)

Box (2). 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers Hydrorise Implant is a scannable radiopaque A-Silicone specific for implantology, ideal in multiple implants treatment. Characterised by a high final hardness, it allows to obtain an accurate impression that detects the three-dimensional position of the implant with precision before transferring it to the laboratory. Available in three viscosities - Heavy, Medium and Light Body - in order to combine the need for rigidity with the one for detail reproduction, it can be used with monophase (Medium Body) and simultaneous, two viscosities (Heavy and Light Body) techniques. Hydrorise Implant does not change its consistency when it comes into contact with oral fluids, and thanks to its thixotropy it does not flow in the mouth during impression taking. It has an ideal working time to allow the user to work calmly, even in the most complex cases. At the same time, setting time is short, assuring a greater comfort to the patient. It is packed with automatic mixing cartridges to simplify and speed up the mixing phase, reducing the possibility of contamination or of making mistakes during the application. Moreover, it can be used with the main impression trays on the market (standard in plastic or steel, or custom in resin). Characteristics Mixing ratio 1:1 (Hydrorise Implant Light Body 50 ml)- Mixing ratio 5:1 (Hydrorise Implant Medium Body 380 ml Hydrorise Implant Heavy Body 380 ml) High final hardness Hydrocompatibility Thixotropy High consistency Radiopacity Biocompatibility Scannability without using matting sprays Colours: Pink - Hydrorise Implant Light Body; Blue - Hydrorise Implant Medium Body; Violet - Hydrorise Implant Heavy Body Mint scented Advantages High rigidity and accuracy of the impression in transferring the threedimensional position of the implant (Heavy and Medium Body) Optimal detail reproducibility of soft tissues around the transfer (Light Body) 3 years shelf-life Snap-set effect

Zhermack Hydrorise Putty Fast Set 2x300ml (C207011) - Box2

Box (2). Fast Set - 2 x 300ml tub (Base + Catalyst) Hydrorise Putty Fast Very heavy viscosity A-silicone for fixed prostheses.  Recommended with a wash for the two-stage or single-stage technique in fixed prostheses Advantages High tear strength Excellent elastic recovery High dimensional stability Possibility of casting the model immediately  Safe disinfection with Zeta 7 Solution and Zeta 7 Spray 3-year shelf life Characteristics 1:1 Mixing ratio Final hardness: 60 Shore A Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Sweet mint flavour Blue colour

Zhermack Hydrorise Maxi Monophase Fast Set 2x380ml (C207041)

Box (2). Hyper-hydrocompatible medium viscosity A-silicone.  Packaged for automatic mixing machines (5:1). Recommended for fixed and removable prostheses, implantology and for monophase technique with one viscosity with individual tray Advantages Ideal consistency for the simultaneous technique with two viscosities Maximum precision in detail reproduction High tear strength Excellent elastic recovery High dimensional stability Hyperhydrophilic technology increases the wettability of the silicone considerably improving the results of the impression Possibility of casting the model immediately Safe disinfection with Zeta 7 Solution and Zeta 7 Spray 3-year shelf life Thanks to its initial flowability, Hydrorise Monophase can be used directly on preparations using an elastomer syringe Characteristics 5:1 Mixing ratio Contact angle <10° Thixotropic Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Sweet mint flavour Purple colour

Zhermack Hydrorise Putty Fast Set Eco Pack 2x900ml (C207013)

Box (2). Economy Pack - Fast Set - 2 x 900ml tub (Base + Catalyst) Hydrorise Putty Fast Very heavy viscosity A-silicone for fixed prostheses.  Recommended with a wash for the two-stage or single-stage technique in fixed prostheses Advantages High tear strength Excellent elastic recovery High dimensional stability Possibility of casting the model immediately  Safe disinfection with Zeta 7 Solution and Zeta 7 Spray 3-year shelf life Characteristics 1:1 Mixing ratio Final hardness: 60 Shore A Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Sweet mint flavour Blue colour

Zhermack Hydrorise Regular Body Fast Set 2x50ml (C207005)

2x50 ml cartridges + 12 pink mixing tips. Advantages Maximum precision in detail reproduction High tear strength Excellent elastic recovery High dimensional stability It exceeds the marked undercuts without tearing It does not cast from preparation Hyper-hydrophilic technology increases the wettability of the silicone considerably improving the results of the impression Possibility of casting the model immediately Safe disinfection with Zeta 7 Solution and Zeta 7 Spray 3-year shelf life Characteristics 1:1 Mixing ratio Very similar to water (hyper-hydrocompatible) Thixotropic Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity Biocompatible Sweet mint flavour Green colour

Zhermack Zeta 7 Trigger Spray 750ml (C810050) - Each

Each. Ready to use, aldehyde-free, broad spectrum disinfectant. Developed and tested according to the latest harmonised European disinfection standards. Lemon fragrance. Applications:- Zeta 7 Solution is specially formulated for the rapid, high-level disinfection of impressions in silicone, alginate, polyether and polysulphur. Zeta 7 Solution does not affect dimensional stability and is fully compatible with plasters Zeta 7 Spray improves the flow of plaster / dental stone over impression surfaces, reducing the formation of bubbles and improving the reproduction of detail. Use:- Immediately after taking the impression, rinse under running water for 30 seconds Spray Zeta 7 Spray all over the surface of the impression. Leave the product to evaporate for 3 minutes. Recommendations:- Avoid contact of Zeta 7 Spray with alcohol-sensitive materials.

Zhermack Mixing Tips Standard Green (C202080) - Pack48

Pack (48). Mixing tips medium/green.

Zhermack Elite Glass Medium Body Fast Set 2x50ml (C401610)

Box (2). Medium bodied CLEAR Addition silicone. Used for making a clear matrix, which can be light-cured through when preparing veneers. Use: Creation of clear moulds directly in the mouth of the patient for the subsequent application and polymerisation of light-curing materials. Can be used in a variety of clinical situations that require enamel shaping work for cosmetic treatments: pigmentations, closing diastemas, correction of dental rotations, crown fractures, morphological dental anomalies, creation of temporary crowns, etc.). Advantages: The new formulation of elite glass has been designed to create completely transparent moulds, allowing a variety of cosmetic dental problems to be resolved quickly with excellent aesthetic results. The use of elite glass significantly reduces the non-polymerised surface layer of the composites due to the inhibition by oxygen. Characteristics: Clear, allows the polymerisation of light-curing and self-curing composites. Thixotropic. Hard after setti

Zhermack Elite HD+ Tray Heavy Body Fast Set 2x50ml (C202032)

Box (2). High viscosity A-Silicone. Ideal for single-stage technique with two viscosities. Suggested indications: Elite HD+ Tray Material on the tray and Elite HD+ Light Normal directly on the preparations. Heavy consistency. Advantages: Ideal consistency for the single-stage technique with two viscosities. High dimensional stability. Excellent elastic recovery. Opaque pigments for improved details reading. Possibility of castinf the model immediately after disinfection. 3-year shelf life. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. Characteristics: 1:1 Mixing ratio. Thixotropic. Ideal working time/setting time ratio (Snap-set effect): - Long working time. - Shorter permanence in the oral cavity. Biocompatible. Orange colour.

Zhermack Elite HD+ Maxi Tray Heavy Fast Set 2x380ml C202320

Box (2). High viscosity A-Silicone. Ideal for single-stage technique with two viscosities. Suggested indications: Elite HD+ Tray Material on the tray and Elite HD+ Light Normal directly on the preparations. Heavy consistency. Advantages: Ideal consistency for the single-stage technique with two viscosities. High dimensional stability. Excellent elastic recovery. Opaque pigments for improved details reading. Possibility of castinf the model immediately after disinfection. 3-year shelf life. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. Characteristics: 1:1 Mixing ratio. Thixotropic. Ideal working time/setting time ratio (Snap-set effect): - Long working time. - Shorter permanence in the oral cavity. Biocompatible. Orange colour.

Zhermack Elite HD+ Maxi Mono MB Normal Set 2x380ml (C202300)

Box (2). Hydrophilic medium body A-silicone for use in automatic mixing machines 5:1 . Monophase technique with one viscosity. Suggested indications: one-component material to be used simultaneously both on the tray and around the preparations. Medium consistency. Advantages: Ideal consistency for the monophase technique. Maximum precision in detail reproduction. High tear strength. dimensional stability. Excellent elastic recovery. High dimensional stability. Opaque pigments for improved detail reading. Possibility of casting the model immediately after disinfection. 3-year shelf life. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. Characteristics: 5:1 Mixing ratio. Hydrophilic. Thixotropic. Biocompatible. Ideal working time/setting time (Snap-set effect): - Long working time. - Shorter permanence in the oral cavity. Yellow colour.

Zhermack Hydrorise Maxi Putty Fast Set 2x380ml (C207045)

Box (2). Fast Set: Very heavy viscosity A-silicone for fixed prostheses. Recommeded with a wash for the two-stage or single-stage technique in fixed prostheses. Packaged for automatic mixing machines (5:1). Advantages: High tear strength. Excellent elastic recovery. The new Zhermack 5:1 mixing system allows the perfect mixing without waste of material. High dimensional stability. Possibility of casting the model immediately. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. 3-year shelf life. Characteristics: 5:1 Mixing ratio. Final hardness: 60 Shore A. Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity. Biocompatible. Sweet mint flavour. Blue colour.

Zhermack Hydrorise Light Body Fast Set 2x50ml (C207001) Box2

Box (2). Normal & Fast Set. Hyper-hydrocompatible low viscosity A-silicone for fixed prostheses. Recommended for the single-stage or two-stage or impression techniques. Advantages: Maximum precision in detail reproduction. High tear strength. Excellent elastic recovery. High dimensional stability. It exceeds the marked undercuts without tearing. It does not cast from preparation. Hyper-hydrophilic technology increases the wettability of the silicone considerably improving the results of the impression. Possibility of casting the model immediately. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. 3-year shelf life. Characteristics: 1:1 Mixing ratio. Very similar to water (hyper-hydrocompatible). Thixotropic. Ideal working time/setting time ratio (snap-set effect): Long working time; Shorter permanence in the oral cavity. Biocompatible. Sweet mint flavour. Pink colour.

Zhermack Elite HD+ Wash LB Fast Setting 2x50ml (C203040)

Box (2). Hydrophilic very low viscosity A-silicone for fixed prostheses. Suggested techniques: two stage. Light consistency. Advantages: - Maximum precision in detail reproduction. - High tear strength. - Excellent elastic recovery. - High dimensional stability. - Opaque pigments for improved detail reading. - Possible of casting the model immediately after disinfection. - 3-year shelf life. Characteristics. - Mixing ratio 1:1. - Hydrophilic. - Thixotropic. - Ideal working time/setting time ratio (Snap-set effect): • Long working time. • Shorter permanence in the oral cavity. - Biocompatible. - Green colour.