Shofu One Gloss Polishing Set (0180) - Each

Each. Set Contains: Cup x 20, Midi x 20, IC x 20, CA Mandrel x 3. Shank: W For composite and tooth enamel OneGloss and OneGloss PS instruments are made of highly concentrated aluminium oxide with silicone as binder. OneGloss PS (Plastic Shank) polishers are mounted on a sturdy plastic mandrel. The hygienic packaging ensures an easy storage and use of the instruments. As they are disposable they improve the process flow in the dental practice. By simply altering the contact pressure, you can go from finishing to polishing with only one instrument: Finishing with high contact pressure (approx. 1 N) Polishing with feathery contact pressure (approx. 0.3 N) Removal of excess cement and polishing of enamel with moderate to light contact pressure Polishing of enamel and removal of tooth discolouration with light contact pressure Indications Chairside The instruments are suited for finishing and polishing of all composite restorations and tooth enamel in one step, for the removal of excess cement without marring delicate inlays as well as for the removal of surface stains and for polishing of tooth enamel after professional cleaning. Benefits Silicone polishers with aluminium oxide Optimal ratio between speed and contact pressure Finishing and polishing with only one instrument No need to change instruments No polishing paste is necessary Optimal abrasive performance Low vibration performance Disposable

Shofu Dura-White Stones HP TC4 0211 - Box12

Box (12). Vitrified-bonded aluminium oxide stones For finishing of enamel, glass ionomer cements, composites, porcelain and prepared tooth abutment, none exceeds the performance of Dura-White stones. Made of micrograined aluminium oxide grits, each ”Arkansas“ stone is perfectly balanced and suited for very fine finishing and smoothing of various dental materials. Benefits Precise concentricity Low vibration performance Consistent cutting action Economical High edge stability Long-lasting service life Wide range of shapes Indications Chairside Finishing and very fine working of e.g. composite or glass ionomer filling materials, porcelain, tooth enamel, e.g. smoothing crown preparations after contouring with diamond abrasives In the dental laboratory Very fine contouring and fine finishing of porcelain or composite restorations Suitable for the following materials: porcelain, composite, compomer, dental hard tissue, glass ionomer cement

Shofu Super-Snap L521 Disk Red (Superfine) - Box50

Box (50). Super-Snap buff disks are designed for finishing and polishing all microfilled and hybrid composites. Elastic silicone shank mount for easy placement of the disk onto the mandrel. Manufactured without a metal center. Very flexible, ultra thin disks allow easy access to interproximal areas. Comes in silicon carbide and aluminum oxide.

Shofu Super-Snap L528 Disk Violet (Medium) - Box50

Box (50). Super-Snap is designed for easy, fast and safe contouring, finishing and polishing of all microfilled and hybrid composites. Elastic silicone shank mount for easy placement of the disk onto the mandrel. Manufactured without a metal center. Very flexible, ultra-thin disks allow easy access to interproximal areas. Two sizes – four grits (silicon carbide and aluminum oxide). Use Super-Snap for: composites.

Shofu Robot Carbide Finisher FG SH41-018 (0704) - Pack3

Pack (3). The suitable instrument for contouring and finishing the surfaces of composites, porcelain, glass ionomer cement or precious metal restorations. Robot Carbide Finishers are used in the dental practice and in the dental laboratory. The instrument heads are made of highly compressed tungsten carbide and are isostatically condensed. The newly designed blade geometry is of special importance. Vibration-poor precision work can be carried out on various dental material surfaces. Indication: Use: Contouring, finishing, ideally suited for the surface finish. Range of application: Suitable for the following materials: composite, porcelain, glass ionomer cements, precious metal. Benefits: Specially developed cutter geometry. 14 different shapes and designs. Optimal surface finish results. Long-lasting. Economical. Precision running.

Shofu Robot Carbide Finisher FG SH41-014 (0703) - Pack3

Pack (3). The suitable instrument for contouring and finishing the surfaces of composites, porcelain, glass ionomer cement or precious metal restorations. Robot Carbide Finishers are used in the dental practice and in the dental laboratory. The instrument heads are made of highly compressed tungsten carbide and are isostatically condensed. The newly designed blade geometry is of special importance. Vibration-poor precision work can be carried out on various dental material surfaces. Indication: Use: Contouring, finishing, ideally suited for the surface finish. Range of application: Suitable for the following materials: composite, porcelain, glass ionomer cements, precious metal. Benefits: Specially developed cutter geometry. 14 different shapes and designs. Optimal surface finish results. Long-lasting. Economical. Precision running.

Shofu OneGloss Mandrel CA (0435) - Box6

Box (6). • OneGloss aluminum oxide polishers are disposable. • OneGloss complete kit with stainlesssteel CA mandrels. • OneGloss PS aluminum oxide polishers are mounted on sturdy plastic mandrels. • OneGloss PS are disposable & individually wrapped. • Available in three differentshapes. • Durable enough to withstand polishing an entire arch. • Use OneGloss & OneGloss PS for: composites, temporary crowns, removal of orthodontic cements & removal of stains from enamel.

Shofu OneGloss Midi Polisher (0182) - Box50

Box (50). OneGloss is aONE step finisher and polisher for all composite restorations. By simply altering the contact pressure, you can go from finishing to polishing. • Pressure of approx. 1.0 Newton with intermittentwater – for finishing. • Pressure of approx. 0.3 Newton – for polishing. OneGloss polishers are made of highly concentrated aluminium oxide with silicone as binder. They are ideal for: • Finishing and polishing of all tooth coloured restorations. • Removing surface stain without damaging the enamel. • Polishing of enamel after scaling. • Removing excess cement without marring enamel or damaging delicate inlays. • Removing excess cement after orthodontic debanding.