Perfection Plus Mylar Matrix Strips 0.05mm thickness-Pack500

Transparent strips. Made from Mylar polyester film. 4" x 3/8" (99mm x 9mm) thickness 0.05mm

Kerr Transparent Strips Curved 8mm x 73mm Red (696) Pack 100

Polyester strips with colour-coded ends. 0.05mm thick. Suitable for all anterior restoration materials.

Kerr Transparent Strips Curved 10mm x 73mm Blue (697)Pack100

Polyester strips with colour-coded ends. 0.05mm thick. Suitable for all anterior restoration materials.

N/A- Frasaco Transparent Crowns 214 - Box5

Box (5).Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 313 - Box5

Box (5).Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 413 - Box5

Box (5).Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 130 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 210 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 220 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 230 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A- Frasaco Transparent Crowns 411 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 420 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 430 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A - Frasaco Transparent Crowns 111 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A- Frasaco Transparent Crowns 221 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.

N/A- Frasaco Transparent Crowns 222 - Box5

Box (5). Frasaco strip crowns are elastic, thin and easy to cut celluloid crowns.In the transparent execution they are light-transmissive for polymerization light. They are used as moulds for creating temporary restorations on preparations and as matrices for restoration of corners and edges. They are placed without problem using any conventional material for temporary restorations. A strip crown in the required size and shape is adjusted to the cervical area and the gingival margin with a crown scissor. Please request manufacturers‘ adresses for products we have tested for this application. Prior to placement, ensure that strip crown and preparation are clean and dry. Fill the strip crown with temporary filling material and place it. Strip crowns can be used as matrices when restoring corners and edges – even when using composites. When doing so, cut out that section of the strip crown corresponding to the part of the tooth being restored, allowing for the strip crown to overlap the margins of the cavity. Fill the matrix with the definite filling material and press it into place. Remove the matrix after the filling material has set. Should for some reason strip crowns remain for a few days on a tooth, please make sure that their gingival edge is no deeper than 1mm inside the sulcus to avoid possible traumatisation of the marginal periodontium. Under no circumstances should strip crowns remain for longer than 30 days in the mouth.