Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A16/5

Pack (5). 644368 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A14/5

Pack (5). 678785 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max ZirCAD CER/in.MT Mul. A2 B45/3

Pack (3). 694542 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS e.max ZirCAD CER/inLab LT A2 C17/5

Pack (5). 686194 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab HT A2 I12/5

Pack (5). 602521 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.HT Blocks – higher translucency and chameleon effect. Lower brightness values. Indications: inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40/3

Pack (3). 634587 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (L) A16/5

Pack (5). 644385 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 B32/3

Pack (3). 648205 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40L/3

Pack (3). 648871 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.