NSK Varios G16 Scaling Tip (Z217120)

Each.

W&H Air Motor AM-25 A RM (30103000)

Ultralight & powerful W&H air motors are characterized by high motor power and a long lifespan. Power can be controlled smoothly in both forward and reverse drive. They are very quiet and ergonomic to use, with 360° rotation around the head of the motor, so no coupling is required. Your advantages at a glance - Short and lightweight Extremely powerful motor with high torque Long lifespan Thermo washer disinfectable and sterilizable AM-25 A RM Features - Internal spray, forward / reverse drive, speed: up to 25,000 rpm (dependent on the quality of the turbine hoses used) without light, standard 4-hole connection.

NSK Varios Scaling Tip G13 (Z217413) - Each

Each.

NSK Varios Perio Tip P26R Right Curved (Z217426) - Each

Each.

NSK Varios Scaling Tip G12 (Z217412) - Each

Each.

NSK Varios Scaling Tip G5 (Z217105) - Each

Each.Scaling tip for the removal of -•Supra gingival tartar•Tartar, narrow interdental space•Marginal gingival tartar•Gingival biofilm under natural tooth

Ivoclar Vivadent Bluephase G4 100-240V Grey (691258) - Each

Each. Intelligent LED light – carefree curing Patented Polyvision technology is your personal assistant when it comes to curing dental materials. This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends the exposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automatically interrupt the exposure cycle so that it can be repeated. Bluephase G4 comes with active anti-glare protection to prevent the light from being activated in open space. Additional advantages: Reliable curing performance  for all light-curing materials due to polywave LED Short curing times starting from 10 seconds due to a high intensity of 1,200 mW/cm2 Wide 10-mm light guide for time-saving single-exposure curing procedures Additional Pre-Cure program for the removal of excess cement Delivery forms 691258 Bluephase G4 691257 Bluephase G4 with Click & Cure and integrated radiometer

Ivoclar Vivadent Bluephase G4 100-240V Grey & Radiometer

Each. Intelligent LED light – carefree curing Patented Polyvision technology is your personal assistant when it comes to curing dental materials. This automatic assistance system helps you achieve reliable curing results. The curing light automatically detects movement of the handpiece during the light-curing procedure. It alerts the user of the improper operation by vibrating and automatically extends the exposure time by 10 per cent, if necessary. If the movement may prevent the material from curing properly, the light will automatically interrupt the exposure cycle so that it can be repeated. Bluephase G4 comes with active anti-glare protection to prevent the light from being activated in open space. Additional advantages: Reliable curing performance  for all light-curing materials due to polywave LED Short curing times starting from 10 seconds due to a high intensity of 1,200 mW/cm2 Wide 10-mm light guide for time-saving single-exposure curing procedures Additional Pre-Cure program for the removal of excess cement Delivery forms 691258 Bluephase G4 691257 Bluephase G4 with Click & Cure and integrated radiometer

Ivoclar Vivadent Bluephase Powercure 100-240V (667092) -Each

Each. Product Features- 3sCure Program: Light intensity of 3,000 mW/cm² for curing times starting from 3 seconds Turbo Program: Light Intensity of 2,000 mW/cm² for curing times starting from 5 seconds High Power program: Light intensity of 1,200 mW/cm² for curing times starting from 10 seconds Cordless design for ultimate mobility in the dental office Intuitive handling with 2-button operation Inductive charging of the battery, no contaminated charging contacts Charging base with information of the charging status High-performance lithium ion battery for an operating capacity of 20 min. within the High Power program Light guide: shortened and autoclavable 3-year warranty (battery 1 year) Homogeneous light emission performance Backlit display for optimized hygiene Radiometer integrated in the charging base Optional corded operation with "Click & Cure"

NSK Surgic Pro Non Optic 230V (Y1003587) - Each

Each. Surgical Motor System. NSK offers advanced technology to greatly enhance clinical performance. Surgic Pro is compact, lightweight and powerful to reliably deliver everything that professionals demand. Contents- Control Unit without data storage facility, SG70M Non-Optic Micromotor, FC-78 Foot Control, SG20 Handpiece (20:1 Reduction), Irrigation tube (5 pcs.) and other accessories. Specifications- Max. Pump Output 75 mL/min 8 Programs / Implant Systems Dimensions W265 x D220 x H100 (mm) Torque 5-80 Ncm Motor Speed 200~40,000 min-1 Light Power(LED Micromotor) over 32,000 LUX Foot Control Functions; Program Button, Speed Control Pedal, Coolant Solution Flow Volume Button, Forward / Reverse Button.

GC D-Light Pro (70000008) - Each

Each. Autoclavable dual wavelength LED curing light with a light and ergonomic design. It offers two curing programs with dual wavelength: High Power (1400mW/cm2) for all routine cases, and Low Power (700mW/cm2) when it is preferable to limit heat generation - for instance in deep cavities when the preparation comes close to the pulp. Thanks to the blue & violet LEDs used in these two curing modes, D-Light Pro can efficiently polymerise all light-cured dental materials. D-Light Pro also offers a unique Detection Mode based on near-UV light only. This violet light will enable you to spot what is not always visible to the naked eye: from infected dentin to plaque, micro-leakage, fluorescent restorations or excess cement, cracks... D-Light Pro also features a very light & thin handpiece, which can be manipulated just like a hand instrument and offers maximum comfort for both patient and clinician. Last but not least, the handpiece can be fully autoclaved (once electronic components & battery have been removed) – ensuring optimal hygiene and eliminating risks of cross-contamination. Indications:- Polymerisation of visible light-cured materials curing with a wavelength range of 400 to 480nm The Detection mode (DT) assists the visualisation of bacteria in plaque, fissures, infected dentin and the presence of micro-leakage. It also helps to identify fluorescent restorative materials, and to evaluate the depth of cracks in the tooth structure Advantages:- Two curing programs: High Power for maximum efficiency and Low Power to limit heat generation in sensitive cases A unique Detection mode to see the invisible (bacterial activity, fluorescent restorations, cracks...) A fully autoclavable handpiece for maximum hygiene A very light & thin design offering an excellent intraoral access and increased comfort for patient & clinician Two batteries to never run out of power

W&H RQ-04 Roto Quick Coupling (10400400)

** NON RETURNABLE ITEM **  Each. without light standard 4-hole connection

W&H RQ-24 Roto Quick Coupling (10402400)

**NON RETURNABLE ITEM** Each, with light, 6-hole connection.

W&H TE-98 Non-Optic Handpiece (30071000)

** NON RETURNABLE ITEM** Dental turbine handpiece with ceramic ball bearings, triple spray and push-button chucking system, for FG burs Ø 1.6 mm (ISO 1797-1).Head size: Ø 12.2 mmPower*: 16 Watt Speed*: 330,000 rpm With standard head, for Roto Quick connection.

W&H TG-98 Fusion Handpiece (30002000)

** NON RETURNABLE ITEM **  Quattro Spray Head size Ø 11,5 mm  19 W, 360,000 rpm FG burs Ø 1.6 mm for bur lengths up to 25 mm. Without light. Ceramic ball bearings. Coupling system Roto Quick.

W&H TG-98 L Fusion Optic Handpiece (30001000)

** NON RETURNABLE ITEM** Quattro Spray. Head size Ø 11,5 mm.  19 W, 360,000 rpm. FG burs Ø 1.6 mm for bur lengths up to 25 mm. LED+. Ceramic ball bearings.  Coupling system Roto Quick.

W&H TG-98 LM Fusion Optic Handpiece (30003000)

** NON RETURNABLE ITEM** Quattro Spray.  Head size Ø 11,5 mm.  19 W, 360,000 rpm. FG burs Ø 1.6 mm for bur lengths up to 25 mm. Compact glass rod. Ceramic ball bearings. Coupling system Multiflex®

W&H WE-56 1:1 Handpiece (30116000)

Each, Dental contra-angle handpiece with push-button chucking system for contra-angle burs with

W&H WG-56 LT 1:1 Optic Handpiece (30009000)

** NON RETURNABLE ITEM ** Contra-angle handpiece 1:1, single spray, head size Ø 9.5 mm, push-button chuck for contra-angle bur with Ø 2.35 mm, compact glass rod. Indications:> Preparation of cavities> Dental trepanning> Resectioning> Separating> Finishing of cavity margins and fillings  

W&H WG-56A 1:1 Non-Optic C/A Handpiece (30010000)

** NON RETURNABLE ITEM **  Contra-angle handpiece 1:1, single spray, head size Ø 9.5 mm, push-button chuck for contra-angle bur with Ø 2.35 mm, compact glass rod. Indications:> Preparation of cavities> Dental trepanning> Resectioning> Separating> Finishing of cavity margins and fillings

W&H WP-64 MU 4:1 Handpiece (10216443)

** NON RETURNABLE ITEM ** For all common screw-in (screw thread 1-72 UNF 2A) and snap on (adaptor) cups and brushes.  Maximum motor speed 10,000 rpm. 

W&H ZE-55 BC - Fixed Borden - Proxeo Air Scaler (11015500)

** NON RETURNABLE ITEM ** Coupling system: Borden 2(3)-holeOscillating frequenzy: 6 kHz Applicable W&H tips: 1AU, 2AU, 3AU, 1AP, 2APl, 2APr Without light, without power regulation and with 2 tips 1AU. 

W&H ZE-55 RM - Fixed Midwest - Proxeo Air Scaler (11015501)

Each. Coupling system: Ritter-Midwest 4-hole, Oscillating frequenzy: 6 kHz, Applicable W&H tips: 1AU, 2AU, 3AU, 1AP, 2APl, 2APr, without light, without power regulation, with 2 tips 1AU

W&H RQ-03 Roto Quick Coupling (10400300)

** NON RETURNABLE ITEM ** Each.  Without Light. 2(3) - Hole Connection.   

W&H AM-25 RM Air Motor (30108000)

**NON RETURNABLE ITEM** Each. without light, without spray, standard 4-hole connection

W&H HE-43 1:1 Handpiece (30119000)

**NON RETURNABLE ITEM** Dental straight handpiece 1:1 with twist tension chucking system, for handpiece and contra-angle burs with Ø 2.35 mm (ISO 1797-1). Drive speed: 40,000 rpm Motor connection according to standard: ISO 3964