Ultradent Ultra-Etch 4x1.2ml Kit (163) - Each

Each. Contents: 4 x 1.2ml syringes 20 x Blue Micro tips Ultra-Etch etchant is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro™ or Inspiral™ Brush tip, facilitates precision placement and superior control. Ultra-Etch etchant is self-limiting in its depth of etch (average depth of 1.9µm with 15-second etch),1 creating an etch pattern that adhesives can penetrate for increased bond strength and reduced sensitivity. Studies demonstrate that Ultra-Etch etchant's unique self-limiting chemistry creates an optimal surface to receive resin.2 Though Ultra-Etch etchant is viscous, it can penetrate into the smallest fissures or occlusal surfaces due to physical and chemical properties that promote capillary action. Its ideal viscosity maintains a layer thick enough to prevent premature drying. Self-limiting Penetrates smallest fissures but won’t migrate on a vertical surface Increases bond strength and reduces sensitivity Places precisely and rinses clearly Rinses cleanly—leaves no residue

Ultradent Oraseal Caulking Syringe Refill 1.2ml (351) -Pack4

Pack (4). OraSeal Caulking and Putty material effectively adheres to wet rubber dams, wet gingival and mucosal tissues, wet teeth, metals,etc.—even under water or in saliva! Use OraSeal Caulking when an adequate seal is difficult to obtain with compromised teeth or roots. OraSeal may also be used to repair rubber dam leaks. It seals the rubber dam when performing a porcelain repair, protecting gingiva from hydrofluoric acid. Deliver into undercuts and below implant bars, precision attachments,etc. to prevent cold cure acrylic or impression material from locking into empty spaces. Fill in gingival embrasures of splints and bridges to facilitate easy cleanup of permanent cement. OraSeal Putty can perform the same functions, but it has a stiffer consistency, which some doctors prefer.

Ultradent Porcelain Etch Refill Syringe 2x1.2ml (406)

Pack (2). Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin. Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1 Both Porcelain Etch and Silane may be used intraorally or extraorally. Porcelain Etch is a viscous, buffered 9% hydrofluoric acid Etch is easy to control and place Will not stain composite or resin cement Silane is a single-component solution Yields highest porcelain-to-resin bond strengths1 Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max

Ultradent Ultra-Etch IndiSpense Refill 30ml - Each

Each. Ultra-Etch is a 35% phosphoric acid solution. It features ideal viscosity, which, along with the use of the Blue Micro or Inspiral Brush tip, facilitates precision placement and superior control. Ultra-Etch is self-limiting in its depth of etch (average depth of 1.9µm with 20-second etch) 2, creating an etch pattern that adhesives can penetrate for increased bond strength and reduced sensitivity. Contemporary studies demonstrate Ultra-Etch’s unique self-limiting chemistry creates an optimal surface to receive resin.3 Though Ultra-Etch is viscous, it can penetrate into the smallest fissures or occlusal surfaces due to physical and chemical properties that promote capillary action. Its ideal viscosity maintains a layer thick enough to prevent premature drying. •Self-limiting. •Penetrates smallest fissures but won’t migrate on a vertical surface. •Increases bond strength and reduces sensitivity. •Places precisely and rinses clearly. •Rinses cleanly—leaves no residue? Uses: Ultra-Etch