Ivoclar Vivadent Tetric PowerFill Syringe IVW (668115WW) -3g

Ivoclar Vivadent Tetric PowerFill IVA Syringe 3g (668083)

Each.Tetric Powerfill is a sculpable, light-curing, radiopaque 4-mm composite for direct restorative treatments in posterior teeth. It offers short curing times starting from 3 seconds.Available in three enamel-like shades A, B and W.Indications -•Restorations in the posterior region (Class I and II, including the replacement of individual cusps)•Class V restorations (cervical caries, root erosion, wedge-shaped defects)•Reconstructive build-ups•Restoration of deciduous teeth.Advantages -Esthetics•Lifelike esthetics in the posterior region•Ivocerin and the Aessencio technology allow you to achieve the same high esthetics as with conventional composites.Quality•Increased process reliability thanks to fewer layers•Fewer errors thanks to short curing times starting from 3 secondsEfficiency•Time savings of up to 57% in the posterior region comapred to the conventional technique*Shades- Three enamel-like shades•A: Universal A shade•B: Universal B shade•W: White or light-coloured permanent teeth*Compared with Tetric EvoCeram and Tetric EvoFlowSyringe

Ivoclar Vivadent Tetric PowerFill IVA Cavifil 0.2g (668107)

Pack (20).Tetric Powerfill is a sculpable, light-curing, radiopaque 4-mm composite for direct restorative treatments in posterior teeth. It offers short curing times starting from 3 seconds.Available in three enamel-like shades A, B and W.Indications -•Restorations in the posterior region (Class I and II, including the replacement of individual cusps)•Class V restorations (cervical caries, root erosion, wedge-shaped defects)•Reconstructive build-ups•Restoration of deciduous teeth.Advantages -Esthetics•Lifelike esthetics in the posterior region•Ivocerin and the Aessencio technology allow you to achieve the same high esthetics as with conventional composites.Quality•Increased process reliability thanks to fewer layers•Fewer errors thanks to short curing times starting from 3 secondsEfficiency•Time savings of up to 57% in the posterior region comapred to the conventional technique*Shades- Three enamel-like shades•A: Universal A shade•B: Universal B shade•W: White or light-coloured permanent teeth*Compared with Tetric EvoCeram and Tetric EvoFlowCavifil 0.2g

Ivoclar Vivadent Variolink Esthetic Try-In Paste Warm 1.7g

Each.Variolink Esthetic is an esthetic light- and dual-curing luting composite for the permanent cementation of demanding ceramic and composite restorations. The cement is based on the esthetic luting composites Variolink II and Variolink Veneer, which have proven their worth in clinical use for many years.Advantages:•Excellent shade stability thanks to the patented and reactive light initiator Ivocerin which is 100% amine-free.•Balanced and straightforward Effect shade system.•Lifelike fluorescence.•Easy, precise, excess removal.•Flexible, situational consistency - ideal combination of flowability and stability.•Impressive radiodiagnostics.Indications:•Variolink Esthetic LC - Permanent cementation of glass-ceramic, lithium disilicate glass-ceramic and composite restorations (inlays, onlays and veneers). Only for restorations with a low material thickness of •Variolink Esthetic DC - Permanent cementation of glass-ceramic, lithium disilicate glass-ceramic and composite restorations (inlays, onlays, partial crowns, crowns, bridges).Includes 5 Application Tips

Ivoclar Vivadent Multilink Hybrid Abutment HO 0 (647182)

Each. Multilink Hybrid Abutment is a self-curing luting composite. It is suitable for the permanent, extraoral cementation of ceramic and PMMA structures on titanium bases in the fabrication of hybrid abutments or hybrid abutment crowns. This results in: a permanent cementation due to high bond strength values optimum esthetics due to two available opacity levels easy handling due to the convenient Automix syringe Indication Extraoral, permanent cementation of ceramic structures on their base. Shades HO 0 MO 0

Ivoclar Vivadent OptraStick Refill (699972) - Pack48

Pack (48). OptraStick is a placement instrument that features a flexible adhesive tip. The tip allows restorations and small objects of all kinds to be picked up, held, carried and placed quickly and easily. OptraStick is suitable for handling inlays, onlays, crowns and veneers made of a variety of materials, for example, IPS Empress, IPS e.max, IPS d.SIGN, IPS InLine and SR Adoro, as well as for metal restorations and tooth jewels, e.g. Skyce. Advantages Easy pick up Precise adherence Secure positioning

Ivoclar Vivadent Tetric EvoFlow Syringe B1 2g (641358) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent.  Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations.  Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

*Ivoclar SpeedCEM Plus Refill Transparent 9g - Each

*this product is temperature controlled, and therefore is not able to be returned for credit. Please store this product in the fridge between 2-8°C* Each. 681712. Contains 1 Automix syringe SpeedCEM Plus transparent 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

*Ivoclar Vivadent SpeedCEM Plus Refill Opaque 9g - Each

*this product is temperature controlled, and therefore is not able to be returned for credit. Please store this product in the fridge between 2-8°C* Each. 681711. Contains 1 Automix syringe SpeedCEM Plus opaque 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

Ivoclar Vivadent SpeedCEM Plus Refill Yellow 9g - Each

Each. 681710. Contains 1 Automix syringe SpeedCEM Plus yellow 9g, 15 Mixing tips, 5 Root canal tips SpeedCEM Plus is a self-adhesive, selfcuring resin cement with optional lightcuring. SpeedCEM Plus offers an ideal combination of performance and user-friendliness. Its formulation has been optimized to make it particularly suitable for use in conjunction with restorations made of zirconium oxide and metal-ceramics and for the cementation of restorations on implant abutments. Advantages Excellent self-cure performance ideal for zirconia and metal-ceramics User-friendly handling Easy clean-up High Radiopacity Tolerant processing Efficient process with just one component Indications SpeedCEM Plus is suited for the permanent seating of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials: Oxide ceramics such as zirconium oxide, e.g. Zenostar or IPS e.max ZirCAD Metal and metal-based restorations Lithium disilicate glass-ceramics, e.g. IPS e.max Available shades: Transparent, Opaque, Yellow

Ivoclar Vivadent Variolink Esthetic Try-In Paste Light+ 1.7g

Each. 666067   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Variolink Esthetic Try-In Paste Light 1.7g

Each. 666113   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Variolink Esthetic TryIn Paste Neutral 1.7g

Each. 666114   Variolink® Esthetic try-in pastes are water-soluble glycerine pastes. The try-in pastes enable the shade effect of all-ceramic restorations (veneers, inlays, onlays, crowns and bridges) to be simulated which are to be cemented with Variolink Esthetic luting composite. Please note that the shade and translucency of the try-in pastes correspond to that of the cured (!) Variolink Esthetic luting composite. The shade of the try-in pastes slightly deviates from that of the respective uncured luting composite, as the luting composite only obtains its final shade after curing. The shade effect of the try-in pastes is coordinated with that of the fully cured luting composite of the same thickness. The Variolink Esthetic try-in pastes contain glycerine, mineral fillers and dyes.

Ivoclar Vivadent Adhese Universal VivaPen Refill 2ml - Each

Each. Adhese Universal is a single-component, light-cured adhesive for direct and indirect bonding procedures that features compatibility with all etching techniques: self-etch, selective-enamel-etch and total-etch. Adhese Universal is available in the unique VivaPen delivery form for fast and convenient direct intra-oral application with minimal waste to optimize cost-effectiveness. Indications: Direct-placed light-curing composite and compomer restorations. Core build-ups with light-, self- and dual-curing composites. Adhesive cementation of indirect restorations with light and dual-curing luting composites. Intraoral repair of fractured composite and compomer restorations. Desensitization of hypersensitive cervical areas. Sealing of prepared tooth surfaces before temporary / permanent cementation of indirect restorations. Advantages: Efficient delivery – up to 190 single-tooth applications per 2ml VivaPen* Universal application – for all bonding and etching techniques Predictable results – high bond strength on dentin and enamel

Ivoclar Vivadent Tetric EvoFlow Cavifil A3.5D (595994)

Pack (20). 20x0.2g. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Cavifil Bleach XL (595995)

Pack (20). 20x0.2g. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A3.5D 2g (595980)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe B3 2g (595957) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach L 2g (595982)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach M 2g (595984)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe Bleach XL (595981)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Multilink Primer A+B Refill 2x3g (576825)

Pack (2). Multilink Automix ensures a strong bond in all cementation cases. This self-curing luting composite with light-curing option is suitable for the adhesive cementation of indirect restorations made of metal, all-ceramics, metal-ceramics and composites. Advantages: Strong hold on all surfaces. Universal application. Straightforward use. Successful and proven. Indications: Cementation of indirect restorations (inlays, onlays, crowns, bridges, endodontic posts) made of: Metal and metal-ceramic (PFM). All-ceramics (silicate). Reinforced all-ceramics (zirconium and aluminium oxide). Composites and fibre-reinforced composites (FRC).

Ivoclar Vivadent Multilink Primer Refill A 3g (613626) -Each

Each. Multilink Automix ensures a strong bond in all cementation cases. This self-curing luting composite with light-curing option is suitable for the adhesive cementation of indirect restorations made of metal, all-ceramics, metal-ceramics and composites. Advantages: Strong hold on all surfaces. Universal application. Straightforward use. Successful and proven. Indications: Cementation of indirect restorations (inlays, onlays, crowns, bridges, endodontic posts) made of: Metal and metal-ceramic (PFM). All-ceramics (silicate). Reinforced all-ceramics (zirconium and aluminium oxide). Composites and fibre-reinforced composites (FRC).

Ivoclar Vivadent Tetric EvoFlow Syringe A3.5 2g (595956)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A4 2g (595978) -Each

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Multilink Automix Try-in Refill Opaque

Each. Part Number: 645958. Multilink Automix is a self-curing luting composite with light-curing option for the adhesive luting of indirect restorations made of metal, metal-ceramic, all-ceramic and composite. The Next Generation of Multilink Automix includes the following: A white shade and try-in pastes. Air Block Liquid strip that enables users to protect the cement line from oxygen exposure during the curing process. Enhanced luting composite formula that facilitates easier removal of the material.

Ivoclar Vivadent Multilink Automix Try-in Refill White -Each

Each. Part Number: 645959. Multilink Automix is a self-curing luting composite with light-curing option for the adhesive luting of indirect restorations made of metal, metal-ceramic, all-ceramic and composite. The Next Generation of Multilink Automix includes the following: A white shade and try-in pastes. Air Block Liquid strip that enables users to protect the cement line from oxygen exposure during the curing process. Enhanced luting composite formula that facilitates easier removal of the material.

Ivoclar Vivadent Mixing Tips Short Tapered Refill (645951)

Pack (15). Use with SpeedCEM and Multilink Automix Universal Adhesive resin cement.

Ivoclar Vivadent Multilink Automix Try-in Refill Yellow Each

Each. Part Number: 645957. Multilink Automix is a self-curing luting composite with light-curing option for the adhesive luting of indirect restorations made of metal, metal-ceramic, all-ceramic and composite. The Next Generation of Multilink Automix includes the following: A white shade and try-in pastes. Air Block Liquid strip that enables users to protect the cement line from oxygen exposure during the curing process. Enhanced luting composite formula that facilitates easier removal of the material.

Ivoclar Vivadent Multilink Automix Refill White Easy 645952

Each. Multilink Automix is a truly multipurpose luting cement indicated for cementation of indirect restorations (inlays, onlays, crowns, bridges, and posts) made from a variety of restorative materials including metal, ceramics, composites and precious metal alloys. Multilink Automix is now available in a new “Easy Clean-Up” formula for situations where pre-curing excess cement is preferred. The new “Easy Clean-Up” formulation allows excess material to be light-cured for 1-2 seconds per quarter surface (mesio-oral, disto-oral, mesio-buccal, disto-buccal), transforming the material to a gel-like consistency for fast, easy removal. High immediate bond strengths to all restorative materials. Universal application. Fast, easy clean-up. Reduction in post-op sensitivity.

Ivoclar Vivadent Tetric EvoFlow Syringe A1 2g (595953WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A2 2g (595954WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Tetric EvoFlow Syringe A3 2g (595955WW)

Each. Tetric EvoFlow is the nano-optimized flowable composite from Ivoclar Vivadent. Tetric EvoFlow is characterized by optimum surface affinity. It even penetrates into areas that are difficult to reach. Therefore, it is suitable as an initial layer under medium-viscosity composites, such as Tetric EvoCeram. At the same time, however, Tetric EvoFlow is stable if required and thus ideally suitable for Class V restorations. The material can also be used for extended fissure sealing and the adhesive cementation of restorations. Tetric EvoFlow is available both in Luer Lock syringes and Cavifils with a particularly thin tip.

Ivoclar Vivadent Monobond Plus Refill 5g (626221AN) - Each

Each. The primer enables users to achieve a strong and durable bond to any dental restorative material because it combines three different functional methacrylates – silane methacrylate, phosphoric methacrylate and sulfide methacrylate. Advantages: Suitable for all types of indirect restoration materials (glass and oxide ceramics, metal, composites, fibre-reinforced composite). Universal reaction time of 60 seconds. Easy storage (refrigerated storage is unnecessary). Indications: Universal, single-component bonding agent for all indirect restorative materials (glass and oxide ceramics, metal, composite, fibre-reinforced composite). It generates a sound bond between the restoration and the cementation material.

Ivoclar Vivadent Excite F Refill 5g (630375WW) - Each

Each. ExciTE F is a light-curing, fluoride releasing, single-component total-etch adhesive. It is used in the placement of direct restorations (composites, compomers) as well as in the adhesive luting of indirect restorations (all-ceramics, composites) involving light-curing. ExciTE F is available in the unique VivaPen, in bottles or in Soft Touch Single Dose vessels. Convenient and economical dispensing from the VivaPen (approx. 120 applications). Also available in bottles and Soft Touch Single Dose vessels. Reliable adhesion, as ExcitTE F establishes a strong bond to enamel and dentin. Consistent quality due to its acetone-free chemistry. Fluoride release. Reduced postoperative sensitivity because dentin surfaces are effectively sealed. Versatile system – Accurate fit of indirect restorations due to the low film thickness.

Ivoclar Vivadent Excite F Twin Refill 2x5g (630376) -Pack2

Pack (2). ExciTE F is a light-curing, fluoride releasing, single-component total-etch adhesive. It is used in the placement of direct restorations (composites, compomers) as well as in the adhesive luting of indirect restorations (all-ceramics, composites) involving light-curing. ExciTE F is available in the unique VivaPen, in bottles or in Soft Touch Single Dose vessels. Convenient and economical dispensing from the VivaPen (approx. 120 applications) Also available in bottles and Soft Touch Single Dose vessels. Reliable adhesion, as ExcitTE F establishes a strong bond to enamel and dentin. Consistent quality due to its acetone-free chemistry. Fluoride release. Reduced postoperative sensitivity because dentin surfaces are effectively sealed. Versatile system – Accurate fit of indirect restorations due to the low film thickness.