Voco V-Posil Putty Fast 2x450ml (2561) - Box2

Box (2). Precision impression material, VPS. • Highly hydrophilic A-silicone for maximum precision • High dimensional accuracy • Long working time combined with a short intraoral setting time • High recovery after deformation • Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect V-Posil Putty is used as preliminary material for: one-step and two-step putty-wash impression techniques, two-step putty-wash impression technique using a foil (plastic putty spacer), one-step putty impression technique for forming functional peripheries. V-Posil Heavy Soft Fast is to be used as heavy bodied material for: one-step impression technique (simultaneous technique) using dual viscosities, two-step impression technique using dual viscosities, functional impressions.

Coltene President The Original Putty 2x300ml (60019942)

Pack (2).  Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Zhermack Elite HD+ Putty Soft Normal Setting 500ml (C203000)

Each. Very high viscosity A-Silicone for fixed prostheses. Suggested technique: two-stage with standard tray. Advantages High deformation strength Excellent elastic recovery High dimensional stability 3-year shelf life Safe disinfection with Zeta 7 Solution and Zeta 7 Spray Characteristics Final hardness: 60 Shore A Ideal working time/setting time ratio (Snap-set effect): Long working time Shorter permanence in the oral cavity Biocompatible Orange colour

Coltene ParaCore Dentin Automix Refill 5ml (5887) - Pack2

Pack (2). Dual curing core material and resin cement in 5 ml automix-syringe.

Perfection Plus Mixing Pad Medium 2.75"x3.75" (PP002/0034)

Pack (70). Perfection Plus Coated Mixing Pads are heavy duty pads with a high poly gloss finish. The pads contain a non-skid foam base and can be used for mixing cements, composites, rubber based materials and silicates.

Solventum 3M Imprint 4 Penta Heavy Refill (71484) - Pack2

Pack (2). Imprint 4 VPS Impression Material delivers precise impression results and offers dentists and patients a fast intra-oral setting time, without compromising working time. Refill includes 2 base paste-300ml each; 2 catalyst-60ml each. Speed: Shortest intra-oral setting time for real time savings. Control: Sufficient working time for a stress-free procedure. Precision: Super hydrophilicity for accurate detail reproduction

Perfection Plus Impress Plus Putty Fast Set 2x300ml - Box2

Box (2). Vinyl Polysiloxane Impression Material. A dark blue A-Silicone putty. 300ml base & 300ml catalyst. Fast Set (Dark Blue). Work Time: 2.00 mins. Set Time: 2.00 mins. Total Set Time: 4.00 mins.

Zhermack Elite HD+ Wash LB Fast Setting 2x50ml (C203040)

Box (2). Hydrophilic very low viscosity A-silicone for fixed prostheses. Suggested techniques: two stage. Light consistency. Advantages: - Maximum precision in detail reproduction. - High tear strength. - Excellent elastic recovery. - High dimensional stability. - Opaque pigments for improved detail reading. - Possible of casting the model immediately after disinfection. - 3-year shelf life. Characteristics. - Mixing ratio 1:1. - Hydrophilic. - Thixotropic. - Ideal working time/setting time ratio (Snap-set effect): • Long working time. • Shorter permanence in the oral cavity. - Biocompatible. - Green colour.

Zhermack Elite HD+ Putty Soft Fast Setting 500ml (C203010)

Each. Very high viscosity A-Silicone for fixed prostheses. Suggested technique: two-stage with standard tray. Advantages: High deformation strength. Excellent elastic recovery. High dimensional stability. 3-year shelf life. Safe disinfection with Zeta 7 Solution and Zeta 7 Spray. Characteristics: Final hardness 60 Shore A. Biocompatible. Ideal working time/setting time ratio (Snap-set effect): Long working time; Shorter permanence in the oral cavity. Yellow colour.

Kerr Maxcem Elite Refill Pack Clear 2x5g (34058) - Pack2

Pack (2). Bond strengths between 22-36 MPa: Depending on substrates. High bond strengths without an adhesive. Ease of use: No need to refrigerate, easy cleanup, and no hand mixing required. Compatibility with common substrates: Anterior or posterior ceramics, PFMs and metal restorations, and CAD/CAM materials. Efficient self-cure mechanism: Sets up completely in the absence of light. Maxcem Elite is simplicity refined, with enhanced bond strengths and superior ease of use. No more 90-second wait before tack curing, no hand mixing and no refrigeration required. For clinicians who want great bond strength and material stability in a single-step resin cement for indirect restorations, Maxcem Elite self-etch, self-adhesive cement offers proven technology without sacrificing performance. Superior color stability enables its use under esthetic restorations anywhere in the mouth, dispensing directly into the restoration or prep. Optional curved tips are available for inlay/onlay and root-canal applications.

Kerr Maxcem Elite Refill Pack White 2x5g (34059) - Pack2

Pack (2). Bond strengths between 22-36 MPa: Depending on substrates. High bond strengths without an adhesive. Ease of use: No need to refrigerate, easy cleanup, and no hand mixing required. Compatibility with common substrates: Anterior or posterior ceramics, PFMs and metal restorations, and CAD/CAM materials. Efficient self-cure mechanism: Sets up completely in the absence of light. Maxcem Elite is simplicity refined, with enhanced bond strengths and superior ease of use. No more 90-second wait before tack curing, no hand mixing and no refrigeration required. For clinicians who want great bond strength and material stability in a single-step resin cement for indirect restorations, Maxcem Elite self-etch, self-adhesive cement offers proven technology without sacrificing performance. Superior color stability enables its use under esthetic restorations anywhere in the mouth, dispensing directly into the restoration or prep. Optional curved tips are available for inlay/onlay and root-canal applications.

Kerr NX3 Automix Dual-Cure Syringe Clear 5g (33643) - Each

Each. Universally indicated for all indirect applications, NX3 is a permanent resin cement system with an innovative chemistry for unmatched aesthetics, adhesion and great versatility. Delivery system choices include an automix syringe for dual-cure indications and a light-cure cement for multiple units where unlimited work time is needed. The automixing dual-cure cement can be used for all indirect applications, including veneers.With Kerr’s proprietary aminefree initiator system and optimized resin matrix, NX3 is the first truly colour-stable adhesive resin cement.