Coltene Jet Blue Bite Superfast 50ml Refill (6497) Pack 4

Coltene Cutting Knife Universal (4420) - Each

Each. A special safe knife with the end turned back on itself used to cut small channels in a putty impression to leave space for wash material to flow out when doing two stage impression.

Coltene Polysiloxane Adhesive 10ml (4410) - Each

Each. Coltene Adhesive is a universal adhesive for silicone-based dental impression materials and serves as an adhesive bonding agent between the impression material and the impression tray. Separation of the impression material during removal from the mouth can therefore be prevented.

Coltene Affinis System 360 Monobody (6482) - Each

Each. Contains: 2 x 300ml Base, 2 x 62ml Catalyst Affinis MonoBody is tissue friendly and neutral in taste without side effects or patient discomfort. After a short oral setting time of 3.30 min the Affinis impression can be easily removed without residue or distortion. The impression is disinfectable without dimensional changes. The high elastic recovery of 99.75% and dimensional change of just 0.2% are the essential characteristics for accurate restorations. Affinis MonoBody can also be used as the tray material for the one-step putty/wash technique.

Coltene Microsystem/Affinis Oral Tips Yellow (6555) - Box100

Box (100).

Coltene SoloCem White Opaque Refill 10.5g/5ml (60014061)

Each. Contains 1x5ml SoloCem White Opaque, 1x5pcs Mixing Tip Short Fine, 1x5pcs Mixing Tip Short Super Fine Reliable cementing without bonding SoloCem is a self-adhesive resin cement with antibacterial zinc oxide that ensures reliable, tight restoration, in concert with a particularly low level of shrinkage. This dual-curing cement achieves outstanding adhesion values that guarantee durable stability on the enamel and dentine without bonding. SoloCem offers Antibacterial Zinc Oxide Time-saving, simplified handling Low shrinkage High adhesion values SoloCem can be applied across a broad range of indications, such as cementing crowns and bridges, root posts, inlays and onlays, as well as on implant abutments.  SoloCem is available in Dentin, Trans and White Opaque colours. White Opaque is ideally suited for cementing metal posts and root posts of every type.

Coltene SoloCem Dentin Refill 10.9g/5ml (60014062) - Each

Each. Contains 1x5ml SoloCem Dentin, 1x5pcs Mixing Tip Short Fine, 1x5pcs Mixing Tip Short Super Fine Reliable cementing without bonding SoloCem is a self-adhesive resin cement with antibacterial zinc oxide that ensures reliable, tight restoration, in concert with a particularly low level of shrinkage. This dual-curing cement achieves outstanding adhesion values that guarantee durable stability on the enamel and dentine without bonding. SoloCem offers Antibacterial Zinc Oxide Time-saving, simplified handling Low shrinkage High adhesion values SoloCem can be applied across a broad range of indications, such as cementing crowns and bridges, root posts, inlays and onlays, as well as on implant abutments.  SoloCem is available in Dentin, Trans and White Opaque colours. White Opaque is ideally suited for cementing metal posts and root posts of every type.

Coltene SoloCem Trans Refill 10.5g/5ml (60019840) - Each

Each. Contains 1x5ml SoloCem Translucent, 1x5pcs Mixing Tip Short Fine, 1x5pcs Mixing Tip Short Super Fine Reliable cementing without bonding SoloCem is a self-adhesive resin cement with antibacterial zinc oxide that ensures reliable, tight restoration, in concert with a particularly low level of shrinkage. This dual-curing cement achieves outstanding adhesion values that guarantee durable stability on the enamel and dentine without bonding. SoloCem offers Antibacterial Zinc Oxide Time-saving, simplified handling Low shrinkage High adhesion values SoloCem can be applied across a broad range of indications, such as cementing crowns and bridges, root posts, inlays and onlays, as well as on implant abutments.  SoloCem is available in Dentin, Trans and White Opaque colours. White Opaque is ideally suited for cementing metal posts and root posts of every type.

Coltene Speedex Universal Activator 60ml (4990) - Each

Each. Speedex has elastic recoverability and reproduction, which is otherwise only achieved by A-Silicones. As a result of the low shrinkage, impressions remain dimensionally stable and can be cast for up to 7 days without problems. Furthermore this premium C-Silicone shows an outstanding wettability and excellent flow characteristics. Saliva and blood are displaced by Speedex medium and have no negative side effects. The Speedex system gives the advantage to work with only one activator for 3 consistencies. Speedex offers: 7 days dimension stability Controllable working times Surface active Moisture control Optimized precision Superior detail Excellent flow behaviors Universal Activator for Speedex putty, Speedex light body and Speedex medium.

Coltene President The Original Regular Body 2x50ml -60019939

Pack (2). PRESIDENT The Original regular body is a medium viscous wash material for the two-phase impression technique with optimal thixotropy On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body 2x75ml (60019941)

Pack (2). No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body System 360 Kit

Each. 60019947 PRESIDENT The Original Heavy Body System 360 Starter Kit:- Contains: 1 × 380 ml cartridge, 10 × Dynamic Mixing Tips, 1 × Fixation Ring No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Heavy Body System 360 2x380ml

Pack (2). 60019948 PRESIDENT The Original Heavy Body System 360 Refill:- Contains: 2 × 380 ml cartridge No matter which material you prefer, you will always make the right choice. PRESIDENT heavy body is highly viscous which perfectly fits to new Xtra light body. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty 2x300ml (60019942)

Pack (2).  Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty Soft 2x300ml (60019943)

Pack (2).  Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Fast Putty Soft 2x300ml

Pack (2). 60022166 Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Putty Super Soft 2x300ml

Pack (2). 60019944 Putty is the preferred material for the 2-step technique where pressure is needed. Besides the well-known putty soft the new putty super soft is very smooth and easy to mix. Different end hardness’s offer optimal stability and simple ease of cutting. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Monobody System 360 Kit

Each. 60019945 PRESIDENT The Original Monobody System 360 Starter Kit:- Contains: 1 × 380 ml cartridge, 10 × Dynamic Mixing Tips, 1 × Fixation Ring With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Monobody System 360 2x380ml

Pack (2). 60019946 PRESIDENT The Original Monobody System 360 Refill:- Contains: 2 × 380 ml cartridge With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Xtra Light Body 2x50ml

Pack (2). 60019937 PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Light Body 2x50ml (60019938)

Pack (2). PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene President The Original Light Body 2x53ml (60019949)

Pack (2). PRESIDENT wash materials show even leveling and thixotropy which results in accurate contours. On the occasion of the 40th anniversary of PRESIDENT, the A-Silicone line has been relaunched under the new brand name PRESIDENT The Original with improved characteristics. New colours The new, fresh colours of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability. New materials The tray portfolio of new PRESIDENT contains beside the common materials two additional viscosities: MonoBody and Putty Super Soft. With the line extension of the monophase material MonoBody, implant impressions can be done even more precisely. In addition, the new Putty Super Soft is very smooth and easy to mix. The new wash material portfolio of PRESIDENT offers beside light body and regular body one additional viscosity: Xtra light body As indicated by the name, Xtra light body is a very fluid wash material which can be used to capture even marginal details as it flows into the narrowest areas without dripping from the tooth.

Coltene ParaCore Mixing Tips Short Super Fine (6747) -Pack40

Pack (40) Diameter 1mm Coltene Short Brown Super Fine Mixing Tips for ParaCore.

Coltene Impression Trays Full Large Upper #1 (C6950) -Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Full Large Lower #2 (C6951) -Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Full Medium Upper #3 (C6952)-Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Full Medium Lower #4 (C6953)-Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Full Small Upper #5 (C6954) -Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Full Small Lower #6 (C6955) -Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Quadrant #7 (C6956) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Quadrant #8 (C6957) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Anterior #9 (C6958) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Impression Trays Assortment Pack (C6959) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. The anatomic form relieves the fitting and ensures a perfect impression. Autoclavable. Features: Rigid by design: A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray Anatomically correct: A statistical database accumulated over 20 years has enabled Coltène / Whaledent to define the ideal form for each tray system Built-in retention:The President Tray System's design aggressively retains all types of impression material. Transparent: Easy and precise positioning of the tray. Modifiable form: The tray can individually be adjusted with heat. Single use: No risk of contamination, no time-consuming cleaning. Economical: Good value for money

Coltene Affinis Putty Soft 2x300ml (6530) - Box2

Box (2). A-silicone impression material. Combines a highly active surfactant system and a contour ‘tracking’ consistency which ensures no air entrapment or margin distortions. Affinis Putty Soft Single Pack 300ml Base 300ml Calalyst

Coltene Affinis System 50 Light Body 2x50ml (6501) - Box2

Box (2). Affinis is a vinyl polysiloxane impression material that remains dimensionally stable after sterilization for an accurate and precise impression. The same unique wetting ability and superior flow properties provide excellent performance to reach all critical margin areas without dripping. Special heat-resistant impression trays (President Tray AC) and an autoclavable adhesive (Coltène Adhesive AC) complete the system. The autoclavable Affinis family of materials is available in 4 wash and tray viscosities. Wash Material Single Packs include: 2 (50 ml) cartridges and 12 small mixing tips.

Coltene Affinis System 75 Heavy Body 2x75ml (6520) - Box2

Box (2). AFFINIS TRAY MATERIALS. With its surface affinity technologie and its ideal thixotropic characteristics AFFINIS heavy body builds up an ideal intraoral pressure, that which drives material easily into all critical areas. AFFINIS heavy body / heavy body fast. The high consistency and rapid build up of pressure for AFFINIS heavy body produces strong compression, making this tray material ideal for the one-step putty/wash technique. Buccal and palatal areas can also be easily reproduced with AFFINIS heavy body.

*Coltene ParaCore White Automix Refill 5ml (5886) - Pack2

*this product is temperature controlled, and therefore is not able to be returned for credit. Please store this product in the fridge between 2-8°C* Pack (2). Dual curing core material and resin cement in 5 ml automix-syringe.

Coltene Affinis Putty Super Soft 2x300ml (6535) - Box2

Box (2).  AFFINIS putty super soft is a standard putty in the AFFINIS putty range. The compatible consistencies of the base and catalyst ensure for quick and easy mixing.

Coltene Affinis System 50 Regular Body 2x50ml (6511) - Box2

Box (2).   Affinis is a vinyl polysiloxane impression material that remains dimensionally stable after sterilization for an accurate and precise impression. The same unique wetting ability and superior flow properties provide excellent performance to reach all critical margin areas without dripping. Special heat-resistant impression trays (President Tray AC) and an autoclavable adhesive (Coltène Adhesive AC) complete the system. The autoclavable Affinis family of materials is available in 4 wash and tray viscosities.   Wash Material Single Packs include: 2 (50 ml) cartridges and 12 small mixing tips.

Coltene Universal Mixing Tip (60019663) - Pack40

Pack (40) One new Universal Mixing Tip:- • For all 50ml and 25ml microSystem™ cartridges from COLTENE • For all COLTENE light and regular body, bite registration and gingival mask materials • All common oral and spreader tips of 50ml and 25ml cartridges can be used • Simple and precise application due to reduced extrusion forces • Practical, flexible and economical

Coltene ParaCore Mixing Tips Short Fine (6759) - Pack40

Pack (40) Diameter 1.8mm Coltene Short Brown Super Fine Mixing Tips for ParaCore.

Coltene ParaCore Dentin Automix Refill 5ml (5887) - Pack2

Pack (2). Dual curing core material and resin cement in 5 ml automix-syringe.

Coltene Affinis Black Edition System 360 Heavy Body 60019776

Pack (2). Silicone impression tray material for the "heavy and light" impression technique. 360 self activating foil bags for automatic mixing machines, making loading and removal clean, safe and fast.

Coltene Roeko Hanel Occlusion Foil 12micron 22mm

Each. For precise occlusal adjustment. The HANEL foil fulfils all the requirements needed for today’s gnathology. The biaxial characteristics of the foil ensure that it is highly tear resistant yet elastic. It is extremely fine and the precise colour transfer guarantees pinpoint markings on high spots. The 22 mm wide foil is available in single-sided, double-sided one colour-ed and double-sided two coloured. For the 22 mm wide foil a practical dispenser is available with an integrated cutter. The 80 mm wide foil is available single-sided or double-sided one coloured in a practical dispenser box. extremely thin. very pliable. pinpoint marking of stops and microcontacts. non toxic colour layer. no smearing.

Coltene Roeko Stay-Put 0 X-Fine 183cm (521000) - Each

Each. A unique combination of softly braided cotton retraction cord and an ultra-fine copper filament centre which is double-wrapped with nylon. The cord can be preformed or shaped around the sulcus.

Coltene Roeko Stay-Put 1 Fine 183cm (521001) - Each

Each. A unique combination of softly braided cotton retraction cord and an ultra-fine copper filament centre which is double-wrapped with nylon. The cord can be preformed or shaped around the sulcus.

Coltene Roeko Stay-Put 2 Med 183cm (521002) - Each

Each. A unique combination of softly braided cotton retraction cord and an ultra-fine copper filament centre which is double-wrapped with nylon. The cord can be preformed or shaped around the sulcus.

Coltene Roeko Stay-Put 3 Thick 183cm (521003) - Each

Each. A unique combination of softly braided cotton retraction cord and an ultra-fine copper filament centre which is double-wrapped with nylon. The cord can be preformed or shaped around the sulcus.

Coltene Roeko Comprecap Size 1 8mm (530008) - Box120

Box (120). ROEKO Comprecap compression caps stop bleeding naturally – by compression and control moisture. The use is simple and supports impression preparation regardless of the retraction technique.

Coltene Roeko Comprecap Size 3 10mm (530010) - Box120

Box (120). ROEKO Comprecap compression caps stop bleeding naturally – by compression and control moisture. The use is simple and supports impression preparation regardless of the retraction technique.

Coltene Roeko Comprecap Size 5 (530014) - Pack60

Pack (60). ROEKO Comprecap compression caps stop bleeding naturally – by compression and control moisture. The use is simple and supports impression preparation regardless of the retraction technique.

Coltene Lab-Putty 7.5kg (8815) - Each

Each. Coltene Laboratory modeling materials: Lab-Putty and Lab-Putty hard used in the appropriate applications have important benefits for the lab-technician: Easy and safe dosage, convenient mixing consistency, problem-free removal and an ideal elasticity after setting. In addition, the optimised end hardness and out-standing dimensional stability provide perfect accuracy and excellent results in a time saving manner. Lab Putty: Lab-Putty is the outstanding polysiloxane laboratory modelling product material with 62 - 67 Shore A for model repairs, isolation and denture heat protection, keys and block outs and matrixes for formation of general occlusion and functional patterns.

Coltene Lab-Putty 900ml & Activator 40ml (8805) - Each

Each. Coltene Laboratory modeling materials: Lab-Putty and Lab-Putty hard used in the appropriate applications have important benefits for the lab-technician: Easy and safe dosage, convenient mixing consistency, problem-free removal and an ideal elasticity after setting. In addition, the optimised end hardness and out-standing dimensional stability provide perfect accuracy and excellent results in a time saving manner. Lab Putty . Lab-Putty is the outstanding polysiloxane laboratory modelling product material with 62 - 67 Shore A for model repairs, isolation and denture heat protection, keys and block outs and matrixes for formation of general occlusion and functional patterns. Lab Putty Hard . A smooth acrylic surface is guaranteed with the use of Lab Putty Hard for relining, keys and repair models. Separate isolation is eliminated. Its high heat-resistance (300

Coltene Lab-Putty Activator 40ml (8840) - Each

Each. Coltene Laboratory modeling materials: Lab-Putty and Lab-Putty hard used in the appropriate applications have important benefits for the lab-technician: Easy and safe dosage, convenient mixing consistency, problem-free removal and an ideal elasticity after setting. In addition, the optimised end hardness and out-standing dimensional stability provide perfect accuracy and excellent results in a time saving manner. Lab Putty. Lab-Putty is the outstanding polysiloxane laboratory modelling product material with 62 - 67 Shore A for model repairs, isolation and denture heat protection, keys and block outs and matrixes for formation of general occlusion and functional patterns. Lab Putty Hard. A smooth acrylic surface is guaranteed with the use of Lab Putty Hard for relining, keys and repair models. Separate isolation is eliminated. Its high heat-resistance (300

Coltene President Impression Trays Size 7 (C6907) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 8 (C6908) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 9 (C6909) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 1 (C6901) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 2 (C6902) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 3 (C6903) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 4 (C6904) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 5 (C6905) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene President Impression Trays Size 6 (C6906) - Pack12

Pack (12). A patented system of intersecting ribs and rails provides unprecedented rigidity in a plastic tray. A statistical database accumulated over 20 years has enabled Colt

Coltene Dynamic Mixing Tips Yellow (6162) - Pack40

Pack (40). Includes Dynamix fixation ring.

Coltene Jet Mixing Tips Light Body (4830) - Pack48

Box (48). President Jet Mixing Tips Light Body.

Coltene Microsystem Oral Tips White (6210) - Box100

Box (100). Fits: President microSystem Light and Regular bodies and Affinis microSystem Light, Fast Light, Regular, and Fast Regular bodies.

Coltene Rapid Liner Activator 18ml (4550) - Each

Each. Simplicity and rationality are the trademarks of Colt

Coltene Affinis Dispenser 50/75ml (6900) - Each

Each. The standard dispenser can be used to fill the impression tray directly from the cartridge or for syringing intra-orally around the preparations.

Coltene Affinis System 360 Heavy Body (6487) - Each

Each. Contains 2 × 380ml (Base and Cat.) 1 × System 360 Fixation Ring AFFINIS TRAY MATERIALS. With its surface affinity technologie and its ideal thixotropic characteristics AFFINIS heavy body builds up an ideal intraoral pressure, that which drives material easily into all critical areas. AFFINIS System 360 putty. A genuine putty from a large cartridge. It provides a firm consistency immediately after being extruded from the mixing unit. It does not adhere to gloves and can be molded immediately into the tray to accommodate the clinical situation.

Coltene Affinis System 75 Fast Heavy Body 2x75ml (6620) Box2

Box (2). AFFINIS TRAY MATERIALS. With its surface affinity technologie and its ideal thixotropic characteristics AFFINIS heavy body builds up an ideal intraoral pressure, that which drives material easily into all critical areas. AFFINIS heavy body / heavy body fast. The high consistency and rapid build up of pressure for AFFINIS heavy body produces strong compression, making this tray material ideal for the one-step putty/wash technique. Buccal and palatal areas can also be easily reproduced with AFFINIS heavy body.

Coltene Affinis Precious Regular Body 2x50ml (6776) - Box2

Box (2). AFFINIS PRECIOUS. Superior flow properties where it counts - In the mouth. AFFINIS PRECIOUS polyvinylsiloxane (PVS) wash materials have a contact angle of only 10

Coltene Affinis Precious Light Body 2x50ml (6775) - Box2

Box (2). AFFINIS PRECIOUS. Superior flow properties where it counts - In the mouth. AFFINIS PRECIOUS polyvinylsiloxane (PVS) wash materials have a contact angle of only 10

Coltene President Jet Bite System 50 2x50ml (6400) - Box2

Box (2). Easy handling and ideal stability facilitate the bite registration. The dental technician appreciates how well the material can be formed and trimmed. Perfect Bite registration - without occlusal adjustments. Jet Bite gives the perfect occlusal fit on the first try. The patient bites down naturally every time because of Jet Bite fast's fluffy, mousse-like consistency. There is no need for time-consuming adjustments. Jet Bite flows smoothly - sets rock hard. Smooth mousse-like consistency - No resistance to closure, no rebound. Jet Bite fast 70 seconds total working time. Working time max. 20 s. Oral setting time min. 50 s. High dimensional stability - no distortion. Not brittle - easy to grind and cut. Saves time - minimizes occlusal adjustments.

Coltene Affinis Fast System 50 Light Body 2x50ml (6601) Box2

Box (2). AFFINIS wash material. a new bench mark in impression technology. Unique surface affinity and ideal flow properties lead to perfect impressions AFFINIS, an A-Silicone, differs in three characteristic features from other surface activated impression materials. The perfect AFFINIS impression is the key to accurate restorations. It is the basis for the successful teamwork between dentist and dental technician. AFFINIS - a new bench mark in impression technology. AFFINIS, an A-Silicone, differs in three characteristic features from other surface activated impression materials. Unique surface affinity. The differentiating element of AFFINIS is a fast and unique affinity of mixed material to moist tooth structure and tissue (gingiva). With its hydrocolloid-like flow properties, affinis reaches all critical areas without the need of pressure from the tray material. Optimized flow. Typically, the addition of surfactants not only provides improved wetting but unfortunately creates a

Coltene Jet Blue Bite Fast 4x50ml (6495) - Each

Each. JET BLUE BITE* fast/superfast bite registration material flows with a smooth whipped-cream consistency exactly where you want it in a predictable quantity and ideal ribbon pattern. The superior handling characteristics are the key for a perfect occlusal fit on the first try. *JET BLUE BITE is a trademark of Colt

Coltene Affinis Fast System 50 Regular Body 2x50ml (6611)

Box (2). Affinis is a vinyl polysiloxane impression material that remains dimensionally stable after sterilization for an accurate and precise impression. The same unique wetting ability and superior flow properties provide excellent performance to reach all critical margin areas without dripping. Special heat-resistant impression trays (President Tray AC) and an autoclavable adhesive (Colt

Coltene Roeko Hanel Articulating Paper Thick 80micron (480387)

Pack (144). Blue Straight For the first stage of testing, to differentiate between areas of high and low masticatory pressure. For medium fine testing. The use of tweezers is not necessary. Double sided. Papers are available in one or two colours. Deep colours for good marking.

Coltene Roeko Hanel Articulating Paper Roll 40micron (480327) - Each

Each. For the first stage of testing, to differentiate between areas of high and low masticatory pressure. For medium fine testing. The use of tweezers is not necessary. Double sided. Papers are available in one or two colours. Deep colours for good marking.

Coltene Roeko Hanel Articulating Paper Blue/Red 80micron (480384)

Pack (144). For the first stage of testing, to differentiate between areas of high and low masticatory pressure. For medium fine testing double sided papers are available in one or two colours. Deep colours for good marking.