Perfection Plus Everest Glass Ionomer A2 15g Powder / 6g Liq

Fast setting, high strength, radiopaque Glass Ionomer aesthetic posterior restorative filling material. Product Code: 010/1601 Provides high levels of compressive strength and excellent bio-compatibility, combined with ease of use as no need to etch or bond. Cement adheres directly to tooth surface. Matches natural fluorescence of enamel with superb translucency. Indications for use: Class III and V cavities, Pit and Fissure Sealant, Core build-up, Base and lining material, Minimal Invention (MI) treatment, Posterior cavities in deciduous teeth and selected permanent teeth. WORKING TIME: Around 2 minutes from start of mix at 22-24°C. CLINICAL SETTING TIME: 2 minutes 30 seconds to 4 minutes 30 seconds from end of mix. Shade A2. 15g Powder and 6ml liquid.

SDI Riva Light Cure HV Capsules A3 (8730003) - Pack50

Light-cured, resin-reinforced glass ionomer restorative cement. High Viscosity. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Temporary fillings Base/dentine replacement Co-curing with composite (Sandwich technique).

SDI Riva Light Cure Capsules Assorted (8710000) - Box50

Light-cured, resin-reinforced glass ionomer restorative cement. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Temporary fillings Base/dentine replacement Co-curing with composite (Sandwich technique).

GC Fuji IX GP Fast Capsules B2 (10000081) - Pack50

Pack (50).GC Fuji IX GP FAST is the fast setting version of GC Fuji IX GP, a strong, wear-resistant multipurpose glass ionomer restorative. This product achieves its initial set in only 3 minutes and 35 seconds after mixing; final finishing can begin in only 3 minutes after placement. It's non-sticky, dough-like consistency and simple placement technique make minimal, invasive restorations a snap. It possesses all the benefits of a glass ionomer, with the additional advantages of packability and handling ease. The encapsulated GC Fuji IX GP FAST is available in 5 Vita Shades.INDICATIONS:Class I and Class II Restorations in deciduous teeth.Emergency or Intermediate Restorative (I.R.M.).Long-term temporary (Posterior fillings).Final restoration for non-stress areas.Core build-up and dentin substitute in Sandwich Technique.Initial set 3'35" from mixing (vs. 4'20" for original formula).Final finishing 3'00" after placement (vs. 6'00" for origninal formula).Restorations can be completed more quickly.Saves chair time.Non-sticky, packable consistency.Easily packs into preparations.Will not pull away from preparation or stick to instruments.Easy to contour and shape.

SDI Riva Self Cure Glass Ionomer Powder Refill Regular SetA3

15g   Glass ionomer restorative material.   Indications:-   Non stress bearing Class I and II restorations Deciduous teeth restorations Geriatric restorations Intermediate restorative and base material for Class I and II cavities using the sandwich technique Cervical (Class V) restorations Core build ups Temporary fillings Restorative in the field using the ART technique Dentin replacement.

GC Fuji IX GP Extra Glass Ionomer Powder 1:1 A3 (10001031)

Packable glass ionomer restorative in a normal and fast set.   Indications:-   GC Fuji IX GP is ideal for permanent or temporary Class I and II restorations in children’s teeth, non-load-bearing Class I and II restorations in adult teeth, Class V and root surface restorations, core build-up and for use with a composite or an inlay in the immediate or delayed sandwich technique Advantages:-   Easy-to-use packable posterior glass ionomer with high wear resistance Intrinsic adhesion to dentine and enamel, without the need for etching and bonding or rubber dam Can be used with metal matrices for easy contouring Single step placement Good radiopacity, facilitating postoperative diagnosis Excellent biocompatibility Fuji IX GP Extra specific:   Extra protection against decalcification Extra fast so you can start finishing and polishing just two and a half minutes after mixing Extra translucency for improved aesthetics Contains 15g powder and 6.4ml liquid

SDI Riva Self Cure Capsules Regular Set A3.5 (8600004)-Box50

Box (50).Glass ionomer restorative material.Indications:-Non stress bearing Class I and II restorationsDeciduous teeth restorationsGeriatric restorationsIntermediate restorative and base material for Class I and II cavities using the sandwich techniqueCervical (Class V) restorationsCore build upsTemporary fillingsRestorative in the field using the ART techniqueDentin replacement.

GC Fuji IX GP Extra Powder 1:1 Packs Shade A2 (10001030)

Each.Contains 15g powder and 6.4ml liquidPackable glass ionomer restorative in a normal and fast set.Indications:-•GC Fuji IX GP is ideal for permanent or temporary Class I and II restorations in children’s teeth, non-load-bearing Class I and II restorations in adult teeth, Class V and root surface restorations, core build-up and for use with a composite or an inlay in the immediate or delayed sandwich techniqueAdvantages:-•Easy-to-use packable posterior glass ionomer with high wear resistance•Intrinsic adhesion to dentine and enamel, without the need for etching and bonding or rubber dam•Can be used with metal matrices for easy contouring•Single step placement•Good radiopacity, facilitating postoperative diagnosis•Excellent biocompatibilityFuji IX GP Extra specific:•Extra protection against decalcification•Extra fast so you can start finishing and polishing just two and a half minutes after mixing•Extra translucency for improved aesthetics

GC EQUIA Forte HT Intro Pack A2 (10004846) - Each

Each. Contains: 20 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, mixed Volume per Capsule (0.14ml) and 20 Unit dose of EQUIA Forte Coat (0.10ml), Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Intro Pack A3 (10004796) - Each

Each. Contains: 20 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, mixed Volume per Capsule (0.14ml) and 20 Unit dose of EQUIA Forte Coat (0.10ml), Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Intro Pack B2 (10004950) - Each

Each. Contains: 20 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, mixed Volume per Capsule (0.14ml) and 20 Unit dose of EQUIA Forte Coat (0.10ml), Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Promo Pack A2 (10004866) - Each

Each. Contains: 100 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA Forte Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Promo Pack A2-A3 (10004848) - Each

Each. Contains: 100 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA Forte Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Promo Pack A3 (10004811) - Each

Each. Contains: 100 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA Forte Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Promo Pack A3-B2 (10004847) - Each

Each. Contains: 100 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA Forte Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Clinic Pack A2 (10004863) - Each

Each. Contains: 200 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA FORTE Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Clinic Pack A3 (10004892) - Each

Each. Contains: 200 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA FORTE Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Clinic Pack B2 (10004878) - Each

Each. Contains: 200 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) and 1 bottle EQUIA FORTE Coat 4ml, Disposable applicator (25) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack A1 (10004873) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack A2 (10004841) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack A3 (10004901) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack A3.5 (10004872) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack B1 (10004878) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack B2 (10004856) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack B3 (10004864) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack C4 (10004794) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

GC EQUIA Forte HT Refill Pack Assorted (10004855) - Each

Each. Contains: 50 Capsules Equia Forte HT Fil (0.40g) Powder and 0.13g (0.10ml) Liquid, Mixed Volume per Capsule (0.14ml) Bulk Fill Glass Hybrid Long Term Restorative System. EQUIA Forte HT is a new member of GC’s Glass Hybrid family. A restorative system designed to provide you a unique solution for your posterior restorations. Unique Glass Hybrid Technology: The uniqueness of Glass Hybrid Technology resides in: Using different sizes of filler’s particles Intelligent particle’s distribution and interaction in the filling matrix combining the filling material with a protective multifunctional monomer coat Strong Superior bulk fill material for class I & II restorations* The high-molecular-weight polyacrylic acid in the filling makes the cement matrix stronger and chemically more stable EQUIA Forte Coat fillers increases surface hardness and wear resistance Easy to handle Moisture tolerant, no rubber dam needed Long working time and short setting time, making the total procedure from application to coating of only 3’25” Small particles acting as lubricant for an easy contour and non-sticky handling No need for conditioning or bonding with its built-in chemical adhesion capacity and outstanding wettability. Translucent Using particles and fillers with close refractive indexes reflects more light to the eye and gives more translucency. With EQUIA Forte HT your posterior restoration is more natural and aesthetic. (*according to the Instruction for Use)

SDI Riva Self Cure Capsule Regular Assorted (8610000) -Box50

Box (50). Glass ionomer restorative material. Indications:- Non stress bearing Class I and II restorations Deciduous teeth restorations Geriatric restorations Intermediate restorative and base material for Class I and II cavities using the sandwich technique Cervical (Class V) restorations Core build ups Temporary fillings Restorative in the field using the ART technique Dentin replacement.

SDI Riva Protect Capsules White (8690000) - Box50

Box (50). Glass ionomer fissure and tooth protector. Riva Protect is the ideal product for caries-challenged patients – it adheres directly to the tooth, strengthens the underlying tooth structure and effectively seals the tooth from harmful bacteria and acids. Great protector for partially erupted teeth. Low viscosity - allows Riva Protect to quickly flow over surfaces and penetrate deeply into pits and fissures. Available in pink or white shades. Self-adhesive - like all glass ionomer cements, Riva Protect chemically bonds to the tooth surface without the need of an adhesive Moisture tolerant - can be placed in a moist or dry environment Indications:- Pit and fissure sealing Root / tooth surface protection Hypersensitivity prevention Temporary fillings Temporary endodontic fillings Lining Bite openings (for orthodontists)

SDI Riva Light-Cure HV Capsules A2 (8730002) - Box50

Box (50). Light-cured, resin-reinforced glass ionomer restorative cement. High Viscosity. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Temporary fillings Base/dentine replacement Co-curing with composite (Sandwich technique).

Solventum 3M Ketac Molar Quick Aplicap A3 (56360) - Box20

Box (20) Ketac Molar Quick material is a bulk-fill, packable and fast-setting conventional glass ionomer. High compressive strength and marginal integrity make it a glass ionomer of choice for posterior restorations High compressive strength Minimal abrasion Excellent handling characteristics: plastic contouring and condensing properties similar to amalgam Aplicap capsule provides consistent quality, simplified handling and a nozzle for direct application of the material Indications: Single-surface fillings in posterior areas Core build-ups Primary teeth fillings (as amalgam substitute) Cervical fillings in posterior region Minimally Invasive Dentistry (MID) Base material for single- and multiple-surface composite fillings

SDI Riva Light-Cure Powder / Liquid Kits A2 (8700502) - Each

Each. Contains: 7.2ml (8g) Riva Light Cure Liquid, 15g Riva Light Cure Powder & accessories Light-cured, resin-reinforced glass ionomer restorative cement. Provides excellent aesthetics, releases fluoride and chemically bonds to the tooth structure. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Pit and fissure sealing Temporary fillings Liner Base/dentine replacement Co-curing with composite (Sandwich technique).

SDI Riva Light-Cure Powder / Liquid Kits A3 (8700503) - Each

Each. Contains: 7.2ml (8g) Riva Light Cure Liquid, 15g Riva Light Cure Powder & accessories Light-cured, resin-reinforced glass ionomer restorative cement. Provides excellent aesthetics, releases fluoride and chemically bonds to the tooth structure. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Pit and fissure sealing Temporary fillings Liner Base/dentine replacement Co-curing with composite (Sandwich technique).

SDI Riva Light Cure Capsules A1 (8700001) - Box50

Box (50). Light-cured, resin-reinforced glass ionomer restorative cement. Provides excellent aesthetics, releases fluoride and chemically bonds to the tooth structure. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Pit and fissure sealing Temporary fillings Liner Base/dentine replacement Co-curing with composite (Sandwich technique).

Solventum 3M Ketac Molar Easymix Refills Powder Shade A3 12.5g (56625)

Each Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap System from 3M ESPE Indications: Permanent class I restorations in non-occlusal areas Semipermanent posterior restorations Primary teeth fillings Core build-ups prior crown placement Base material for composite fillings Class V restorations Fissure sealings Product Benefits: High compressive strength and surface hardness Minimal abrasion Packable Fluoride release

Solventum 3M Ketac Molar Easymix Refills Liquid 8.5ml (56628) - Each

Each Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap System from 3M ESPE Indications: Permanent class I restorations in non-occlusal areas Semipermanent posterior restorations Primary teeth fillings Core build-ups prior crown placement Base material for composite fillings Class V restorations Fissure sealings Product Benefits: High compressive strength and surface hardness Minimal abrasion Packable Fluoride release

SDI Riva Light-Cure HV Capsules A1 (8730001) - Box50

Box (50). Light-cured, resin-reinforced glass ionomer restorative cement. High Viscosity. Indications:- Non stress bearing Class I and II restorations Class III restorations Cervical (Class V) restorations Deciduous teeth restorations Geriatric restorations Core build-ups Temporary fillings Base/dentine replacement Co-curing with composite (Sandwich technique).

SDI Riva Self Cure Capsules Regular Set A3 (8600003) - Box50

Box (50). Glass ionomer restorative material. Indications:- Non stress bearing Class I and II restorations Deciduous teeth restorations Geriatric restorations Intermediate restorative and base material for Class I and II cavities using the sandwich technique Cervical (Class V) restorations Core build ups Temporary fillings Restorative in the field using the ART technique Dentin replacement.

GC Fuji Triage 1-1 Kit White (10000388) - Each

Each. Contains 15g powder 8ml liquid 5.7ml Dentin Conditioner Accessories Radiopaque Glass Ionomer Protection Material. Simple and serious protection for teeth at need. GC Fuji Triage Protects. Seals. Fortifies. Children with fragile, erupting teeth. Adults seeking immediate relief from sensitive teeth. Elderly patients developing caries, rampant and unchecked. The lowest common denominator? They need protection fast. Effective protection, on the tooth surface, now. Redeveloped from GC Fuji VII, GC Fuji Triage already has a strong track record of preventing caries in erupting teeth. GC Fuji Triage is self-adhesive, insensitive to moisture and has a low enough viscosity to penetrate pits and fissures. Advantages: Very high level of fluoride release. 6 times higher than any other glass ionomer. Can be applied when saliva control is not possible. To treat newly erupted molars (partially) covered by tissue.  Chemical adhesion to tooth structure. No etching, no bonding.  Self curing conventional GIC with optional Command set with VLC unit.

SDI Riva Self Cure HV Capsules A2 (8630002) - Box50

Box (50). High Viscosity glass ionomer restorative material. Indications: Non stress bearing Class I and II restorations, Deciduous teeth restorations, Geriatric restorations, Intermediate restorative and base material for Class I and II cavities using the sandwich technique, Cervical (Class V) restorations, Core build ups, Temporary fillings, Restorative in the field using the ART technique, Dentin replacement

SDI Riva Self Cure HV Capsules A3 (8630003) - Box50

Box (50). High Viscosity glass ionomer restorative material. Indications: Non stress bearing Class I and II restorations, Deciduous teeth restorations, Geriatric restorations, Intermediate restorative and base material for Class I and II cavities using the sandwich technique, Cervical (Class V) restorations, Core build ups, Temporary fillings, Restorative in the field using the ART technique, Dentin replacement

SDI Riva Self Cure HV Capsules A3.5 (8630004) - Box50

Box (50). High Viscosity glass ionomer restorative material. Indications: Non stress bearing Class I and II restorations, Deciduous teeth restorations, Geriatric restorations, Intermediate restorative and base material for Class I and II cavities using the sandwich technique, Cervical (Class V) restorations, Core build ups, Temporary fillings, Restorative in the field using the ART technique, Dentin replacement

SDI Riva Self Cure HV Capsules A1 (8630001) - Box50

Box (50). High Viscosity glass ionomer restorative material. Indications: Non stress bearing Class I and II restorations, Deciduous teeth restorations, Geriatric restorations, Intermediate restorative and base material for Class I and II cavities using the sandwich technique, Cervical (Class V) restorations, Core build ups, Temporary fillings, Restorative in the field using the ART technique, Dentin replacement

GC Fuji IX GP Fast Capsules C4 (10000083) - Box50

Box (50). Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance.  No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique.  Can be used with metal matrices. Easy contouring in the cavity.  Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis.  Excellent bio-compatibility.

Solventum 3M Ketac Universal Powder A1 12g (61106) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fill no need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Powder A2 12g (61107) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Powder A3 12g (61108) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Powder A3.5 12g (61109) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Powder A4 12g (61110) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Liquid 8.5ml (61111) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Powder White 12g (61105) - Each

Each Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Intro Kit A3 (61104) - Each

Each. Kit contains - 12.5g powder; 8.5ml liquid; spoon; mixing pad Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap A3.5 (61095) - Box50

Box (50) Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap A4 (61096) - Box50

Box (50) Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap Assorted (61085) - Box50

Box (50). Assorted shades White, A3 Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap White (61086) - Box50

Box (50) Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap A1 (61087) - Box50

Box (50) Glass ionomer restorative Advantages No need for conditioner or coating Bulk fillno need or layering Enables fast, one-step, stress-bearing restorative solutions Extended indications for use compared to other glass ionomer materials Low stickiness allows easy placement Continuously releases fluoride for 24 months Self-adhesive Self-cure Available in 6 shades Indications for use Linings for single- and multiple-surface composite fillings Core build-up prior to crown placement Primary tooth fillings Stress-bearing Class I restorations with at least one additional support outside of the filling area Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area Cervical fillings Single- and multiple-surface temporary fillings Fissure sealing

Solventum 3M Ketac Universal Aplicap A2 (61088) - Box50

**Free product added to order after checkout.    Box (50) Glass ionomer restorative Advantages - No need for conditioner or coating - Bulk fillno need or layering - Enables fast, one-step, stress-bearing restorative solutions - Extended indications for use compared to other glass ionomer materials - Low stickiness allows easy placement - Continuously releases fluoride for 24 months - Self-adhesive - Self-cure - Available in 6 shades Indications for use - Linings for single- and multiple-surface composite fillings - Core build-up prior to crown placement - Primary tooth fillings - Stress-bearing Class I restorations with at least one additional support outside of the filling area - Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area - Cervical fillings - Single- and multiple-surface temporary fillings - Fissure sealing

Solventum 3M Ketac Universal Aplicap A3 (61089) - Box50

Box (50) Glass ionomer restorative Advantages - No need for conditioner or coating - Bulk fillno need or layering - Enables fast, one-step, stress-bearing restorative solutions - Extended indications for use compared to other glass ionomer materials - Low stickiness allows easy placement - Continuously releases fluoride for 24 months - Self-adhesive - Self-cure - Available in 6 shades Indications for use - Linings for single- and multiple-surface composite fillings - Core build-up prior to crown placement - Primary tooth fillings - Stress-bearing Class I restorations with at least one additional support outside of the filling area - Stress-bearing Class II restorations when the isthmus is less than half of the intercuspal distance and with at least one additional support outside of the filling area - Cervical fillings - Single- and multiple-surface temporary fillings - Fissure sealing

Voco IonoStar Molar Application Capsule Asstd (2520) -Pack50

Pack (50). Indications:- Fillings of cavities without class I occlusal support. Semipermanent fillings of cavities class I and II. Fillings of lesions of the tooth neck, Class V cavities and root caries. Fillings of cavities class III. Restoration of teeth. Fund cavity / liners. Core build. Temporary fillings. Benefits:- Editable consistency by mixing time. Perfect adaptation to marginal seal and easy application. Can be shaped immediately after application, does not stick to the instrument. In the new capsule VOCO application, easy to operate without activator. The new design of the capsule facilitates access to small cavities and difficult to reach places in the mouth. High resistance to compression and abrasion. With the technology proven VOCO glass.

Solventum 3M Vitremer Powder A4 9g (3303A4) - Each

Each. Vitremer Powder is one part of our advanced glass ionomer system.Refill includes 9g powder in shade A4. Benefits: Versatile system can be light-cured or self-cured to meet your application needs. Unique dark-cure chemistry allows for bulk placement which eliminates the need for layering and saves time. Displays a true glass ionomer cure for long-term fluoride release and adhesion to tooth structure which provides better patient protection and increased doctor confidence. As a restorative material, it provides good handling properties and extended working time in the mouth for easier use. Available in a variety of shades to better match existing tooth structure for esthetic restorations. Pedo shade is available for pedodontic applications and Blue shade for core buildup applications.

GC Fuji IX GP Capsules A2 (10000053) - Box50

Box (50). Introducing packable Fuji IX GP: the easy-to-use, handle and place fluoride releasing alternative to expensive compomers and composites and in many cases, amalgam. It cures extremely hard and is very wear resistant. It's the perfect product for: Geriatric and Pediatric Resorations. Final Restorations (Non-stress areas). Intermediate Restorative (IRM). Core Material. Long-Term Temporary Restoration. As a true glass ionomer, it chemically bonds to tooth structure, has a toothlike coefficient of thermal expansion and releases significant levels of rechargeable fluoride. Available in hand-mix powder-liquid and premeasured capsules.

Solventum 3M Ketac Molar Aplicap Assorted (56410) - Box50

Box (50). Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap System from 3M ESPE. Indications: Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Primary teeth fillings. Core build-ups prior crown placement. Base material for composite fillings. Class V restorations. Fissure sealings. Product Benefits: High compressive strength and surface hardness. Minimal abrasion. Packable. Fluoride release.

GC Fuji IX GP Fast Capsules A1 (10000324) - Box50

Box (50). Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Extra Capsules C4 (10000407) - Box50

Box (50). GC Fuji IX™ GP FAST. FAST Packable Posterior Restorative. Fuji IX GP FAST is the fast setting version of Fuji IX GP, a strong, wear-resistant multipurpose glass ionomer restorative. Achieving it's initial set in only 3 minutes 35 seconds after mixing, final finishing can begin in only 3 minutes after placement. It's non-sticky, dough-like consistency and it's simple placement technique make minimally invasive restorations a snap. It possesses all the benefits of a glass ionomer with the additional advantages of packability and handling ease. Encapsulated Fuji IX GP FAST is available in 5 Vita Shades. INDICATIONS: Class I and Class II Restorations in Deciduous Teeth. Emergency or Intermediate Restorative (I.R.M.). Long-term temporary (Posterior fillings). Final restoration for non-stress areas. Core build-up and dentin substitute in Sandwich Technique. Initial set 3'35" from mixing (vs. 4'20" for original formula). Final finishing 3'00" after placement (vs. 6'00" for origninal

GC Fuji II LC Capsules Assorted (10000033) - Box50

Box (50). Ultra convenient GC Fuji II LC Capsules are available in premeasured unit dose capsules for no-mess mixing. Nothing rivals GC Fuji II LC Capsules in esthetics, simplicity and economy when it comes to: Class III and Class V restorations. Cervical erosions/abfraction lesions. Root surface caries liner/base.

GC Fuji II 1-1 Kit A3 Yellow Brown (10000016) - Each

Each. The new smaller glass particles allow greater density which assures a smoother, glossier, more attractive finish. The harder material offers higher abrasion resistance so the restorations retain a brilliant, discoloration-free surface finish longer. Nothing rivals GC Fuji II LC Restorative in esthetics, simplicity and economy when it comes to: Class III and Class V restorations. Cervical erosions/ abfraction lesions. Root surface caries liner/base.

GC Fuji II LC Powder B2 15g (10000067) - Each

Each. GC Fuji II is a self-cured glass ionomer restorative featuring high resistance to water and can be finished in just 15 minutes (under water spray). Its high surface hardness provides for a durable restoration. Available in powder-liquid or premeasured capsules. Excellent Tear Strength and Bond Strength. Low Solubility. Proven Fluoride Release. Available in Multiple Shades. Radiopaque.

Solventum 3M Ketac Molar Quick Aplicap Assorted (56369) - Box50

Box (50). Highly viscous glass ionomer for fast setting posterior restorations in the Aplicap System from 3M ESPE. Indications: Primary teeth fillings. Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Extended fissure sealing. Class V restorations. Core build-ups prior crown placement. Base material for composite fillings. Product Benefits: High compressive strength and surface hardness. Short mixing time. Short setting time. Still enough working time. Fluoride release. Long nozzle of the capsule for a direct application.

GC Fuji II LC Capsules A3.5 (10000037) - Box50

Box (50). Ultra convenient GC Fuji II LC Capsules are available in premeasured unit dose capsules for no-mess mixing. Nothing rivals GC Fuji II LC Capsules in esthetics, simplicity and economy when it comes to: Class III and Class V restorations. Cervical erosions/abfraction lesions. Root surface caries liner/base.

GC Fuji Triage Capsules Command Set Pink (10000389) - Box50

Box (50). Radiopaque Glass Ionomer Protection Material. Simple and serious protection for teeth at need. GC Fuji Triage Protects. Seals. Fortifies. Children with fragile, erupting teeth. Adults seeking immediate relief from sensitive teeth. Elderly patients developing caries, rampant and unchecked. The lowest common denominator? They need protection fast. Effective protection, on the tooth surface, now. Redeveloped from GC Fuji VII, GC Fuji Triage already has a strong track record of preventing caries in erupting teeth. GC Fuji Triage is self-adhesive, insensitive to moisture and has a low enough viscosity to penetrate pits and fissures. Advantages Very high level of fluoride release. 6 times higher than any other glass ionomer. Can be applied when saliva control is not possible. To treat newly erupted molars (partially) covered by tissue. Chemical adhesion to tooth structure. No etching, no bonding. Self curing conventional GIC with optional Command set with VLC unit.

GC Fuji Triage Capsules Command Set White (10000390) - Box50

Box (50). Radiopaque Glass Ionomer Protection Material. Simple and serious protection for teeth at need. GC Fuji Triage Protects. Seals. Fortifies. Children with fragile, erupting teeth. Adults seeking immediate relief from sensitive teeth. Elderly patients developing caries, rampant and unchecked. The lowest common denominator? They need protection fast. Effective protection, on the tooth surface, now. Redeveloped from GC Fuji VII, GC Fuji Triage already has a strong track record of preventing caries in erupting teeth. GC Fuji Triage is self-adhesive, insensitive to moisture and has a low enough viscosity to penetrate pits and fissures. Advantages: Very high level of fluoride release. 6 times higher than any other glass ionomer. Can be applied when saliva control is not possible. To treat newly erupted molars (partially) covered by tissue. Chemical adhesion to tooth structure. No etching, no bonding. Self curing conventional GIC with optional Command set with VLC unit.

Solventum 3M Ketac Molar Quick Aplicap A2 (56363) - Box50

Box (50). Highly viscous glass ionomer for fast setting posterior restorations in the Aplicap System from 3M ESPE. Indications: Primary teeth fillings. Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Extended fissure sealing. Class V restorations. Core build-ups prior crown placement. Base material for composite fillings. Product Benefits: High compressive strength and surface hardness. Short mixing time. Short setting time. Still enough working time. Fluoride release. Long nozzle of the capsule for a direct application.

Solventum 3M Ketac Molar Quick Aplicap A3 (56364) - Box50

Box (50). Highly viscous glass ionomer for fast setting posterior restorations in the Aplicap System from 3M ESPE. Indications: Primary teeth fillings. Permanent class I restorations in non-occlusal areas. Extended fissure sealing. Class V restorations. Core build-ups prior crown placement. Base material for composite fillings. Product Benefits: High compressive strength and surface hardness. Short mixing time. Short setting time. Still enough working time. Fluoride release. Long nozzle of the capsule for a direct application.

GC Fuji II LC Capsules A1 (10000034) - Box50

Box (50). Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

SDI Riva Light Cure Capsules A2 (8700002) - Box50

Box (50). The glass ionomer restorative with true esthetics. Combination of GIC advantages and composite advantages. Riva Light Cure is a light-cured, resin-reinforced glass ionomer restorative cement. Glass ionomers release fluoride and chemically bond to the tooth structure and composites have excellent esthetics. Riva Light Cure is a combination of both with excellent aesthetics, fluoride release and chemically bonds to the tooth structure. No Bisphenol A or derivatives. Riva Light cure does not contain any Bisphenol A or its derivatives. Use this product on your patients with confidence and peace of mind. Proprietary ionglass technology. Riva Light Cure utilises SDI’s proprietary ionglass filler developed by glass technologists. ionglass is a radiopaque, high ion releasing, reactive glass used in SDI’s range of dental cements. Riva Light Cure releases fluoride to assist with remineralization of the natural dentition.

Solventum 3M Ketac Molar Aplicap A3 (56420) - Box50

Box (50). Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap System from 3M ESPE. Indications: Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Primary teeth fillings. Core build-ups prior crown placement. Base material for composite fillings. Class V restorations. Fissure sealings. Product Benefits: High compressive strength and surface hardness. Minimal abrasion. Packable. Fluoride release.

Solventum 3M Ketac Molar Aplicap A1 (56430) - Box50

Box (50). Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap System from 3M ESPE. Indications: Permanent class I restorations in non-occlusal areas. Semipermanent posterior restorations. Primary teeth fillings. Core build-ups prior crown placement. Base material for composite fillings. Class V restorations. Fissure sealings. Product Benefits: High compressive strength and surface hardness. Minimal abrasion. Packable. Fluoride release.

GC Fuji IX GP Fast Capsules A3.5 (10000080) - Pack50

Pack (50). GC Fuji IX GP FAST is the fast setting version of GC Fuji IX GP, a strong, wear-resistant multipurpose glass ionomer restorative. This product achieves its initial set in only 3 minutes and 35 seconds after mixing; final finishing can begin in only 3 minutes after placement. It's non-sticky, dough-like consistency and simple placement technique make minimal, invasive restorations a snap. It possesses all the benefits of a glass ionomer, with the additional advantages of packability and handling ease. The encapsulated GC Fuji IX GP FAST is available in 5 Vita Shades. INDICATIONS: Class I and Class II Restorations in deciduous teeth. Emergency or Intermediate Restorative (I.R.M.). Long-term temporary (Posterior fillings). Final restoration for non-stress areas. Core build-up and dentin substitute in Sandwich Technique. Initial set 3'35" from mixing (vs. 4'20" for original formula). Final finishing 3'00" after placement (vs. 6'00" for origninal formula). Restorations can be completed

Voco IonoStar Molar Application Capsule A2 (2525) - Pack20

Pack (20). Indications:- Fillings of cavities without class I occlusal support. Semipermanent fillings of cavities class I and II. Fillings of lesions of the tooth neck, Class V cavities and root caries. Fillings of cavities class III. Restoration of teeth. Fund cavity / liners. Core build. Temporary fillings. Benefits:- Editable consistency by mixing time. Perfect adaptation to marginal seal and easy application. Can be shaped immediately after application, does not stick to the instrument. In the new capsule VOCO application, easy to operate without activator. The new design of the capsule facilitates access to small cavities and difficult to reach places in the mouth. High resistance to compression and abrasion. With the technology proven VOCO glass.

Voco IonoStar Molar Application Capsule A3 (2526) - Pack20

Pack (20). Indications:- Fillings of cavities without class I occlusal support. Semipermanent fillings of cavities class I and II. Fillings of lesions of the tooth neck, Class V cavities and root caries. Fillings of cavities class III. Restoration of teeth. Fund cavity / liners. Core build. Temporary fillings. Benefits:- Editable consistency by mixing time. Perfect adaptation to marginal seal and easy application. Can be shaped immediately after application, does not stick to the instrument. In the new capsule VOCO application, easy to operate without activator. The new design of the capsule facilitates access to small cavities and difficult to reach places in the mouth. High resistance to compression and abrasion. With the technology proven VOCO glass.

Solventum 3M Vitremer Blue Powder 9g (3303B) - Each

Each. Vitremer Powder is one part of our advanced glass ionomer system. Refill includes 9g powder in shade Blue, Spoon. Benefits: Versatile system can be light-cured or self-cured to meet your application needs. Unique dark-cure chemistry allows for bulk placement which eliminates the need for layering and saves time. Displays a true glass ionomer cure for long-term fluoride release and adhesion to tooth structure which provides better patient protection and increased doctor confidence. As a restorative material, it provides good handling properties and extended working time in the mouth for easier use. Available in a variety of shades to better match existing tooth structure for esthetic restorations. Pedo shade is available for pedodontic applications and Blue shade for core buildup applications.

Solventum 3M Vitremer Powder A3 9g (3303A3) - Each

Each. An advanced glass ionomer system that offers a three-way cure to meet your needs for core buildup and restorative applications. Refill includes 9g powder in shade A3, Spoon. Benefits: Versatile system can be light-cured or self-cured to meet your application needs. Unique dark-cure chemistry allows for bulk placement which eliminates the need for layering and saves time. Displays a true glass ionomer cure for long-term fluoride release and adhesion to tooth structure which provides better patient protection and increased doctor confidence. As a restorative material, it provides good handling properties and extended working time in the mouth for easier use. Available in a variety of shades to better match existing tooth structure for esthetic restorations. Pedo shade is available for pedodontic applications and Blue shade for core buildup applications.

GC Fuji IX GP Powder A2 15g (10000046) - Each

Each. Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Capsules A3 (10000054) - Box50

Box (50). Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Fast Capsules A2 (10000078) - Box50

Box (50). Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Intro Package 1-1 Pack A3 (10000045) - Each

Each. Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Powder A3 15g (10000047) - Each

Each. Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Liquid 6.4ml (10000052) - Each

Each. Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji IX GP Fast Capsules A3 (10000079) - Box50

Box (50). Packable Glass Ionomer Restorative Cement. The packable non-sticky consistency of GC Fuji IX GP makes it ideal to be used in Class V, I & II restorations, as base or as core build-up material. The genuine glass ionomer properties in combination with the ease of use, ensures that GC Fuji IX GP can match all your demands on modern restorative materials. Advantages: Packable posterior glass ionomer. High wear resistance. No need for rubber dam. Ease of use. Intrinsic adhesion to dentine and enamel. No etching, no bonding. No need for undercutting. Tooth-conserving preparation technique. Can be used with metal matrices. Easy contouring in the cavity. Single step placement. No need for layering technique. Good radiopacity. Facilitating post-operative diagnosis. Excellent bio-compatibility.

GC Fuji II LC Capsules A2 (10000035) - Box50

Box (50). Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Capsules A3 (10000036) - Box50

Box (50). Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Liquid 6.8ml (10000073) - Each

Each. Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Powder A1 15g (10000062) - Each

Each. Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Powder A2 15g (10000063) - Each

Each. Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Powder A3 15g (10000064) - Each

Each. Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.

GC Fuji II LC Powder A3.5 15g (10000065) - Each

Each. Light Cured Glass Ionomer Cement. GC Fuji II LC Improved is the world-wide leading light-cured glassionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC Improved is a multipurpose material, with secondary indications such as liner, base and core build-up. Advantages: Smaller particles. Excellent aesthetics and polishability. Higher filler loading. Significantly improved abrasion resistance. Good radiopacity. Facilitating post-operative diagnosis. Self-adhesive to tooth structure. No etching, no bonding. Hydrophilic. Very good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched. Smooth, porosity-free surface after sealing with GC Fuji Coat LC. Practical application and manipulation.