3M Lava Ultimate CAD/CAM Restorative CEREC 12L A3 LT - Pack5

Pack (5) 3M ESPE Lava Ultimate CAD/CAM Restorative for CEREC is a new classification of material called a Resin Nano Ceramic (RNC). Utilising 3Ms expertise in nano technology, the material is a mixture of composite and ceramic. Like a composite, the material is not brittle and is fracture resistant. Like a glass ceramic the material has excellent polish retention for lasting aesthetics This new material can be easily milled at the chairside, polishes to a high gloss and elimates the need for a firing step after milling Fast no-firing process for 100% true chairside workflow Easy to mill and polish High strength and fracture toughness for a long lasting restoration Intra-oral adjustability with light cure composites Lifelike aesthetics with a high polish and a high variety of shades 10 Year Limited Warranty

Coltene Flexibole Mixing Bowl Extra Large (H00566) - Each

Each. Accessories for laboratory needs

Coltene Flexibole Mixing Bowl Small (H00563) - Each

Each. Accessories for laboratory needs

Denar Articulator Mounting Plates Black Plastic Screw - 100

Pack (100).Improved, single use black plastic Mounting Plates designed for use with Denar and Hanau articulators. These new insertless type plates means no rusting issues and if screws are stripped, only the plate will need to replaced, there will be no damage to the screw knob. Pack sizes of 2, 10, 50 or 100.

Dentsply CEREC Tessera Block Starter Kit (5365430113)

Each.CEREC Tessera - Advanced Lithium Disilicate (ALD)For single-visit indirect restorations, clinicians have grown accustomed to making trade-offs. Effiency versus esthetics. Esthetics versus strength. These trade-offs force unwanted decisions—from not using stains in order to fire faster to complicating inventory and processing protocols by keeping two or more block materials in stock.Now, there's one Choice for Beauty, Strength and Speed without unwanted Trade-Offs: CEREC Tessera CAD/CAM blocks provide outstanding esthetics for a truly tooth-like restoration.Up to 32% higher biaxial strength for restoration longevity.And up to 44% faster total processing time for greater patient satisfaction and a more profitable procedure.Speed, strength, and esthetics. It’s the trifecta for single-visit successContains 2 each: A1 (MT), A2 (MT & HT), A3 (MT & HT), A3.5 (MT). Honeycomb & firing pads, investment pins, overglaze & glaze liquid, stain/glaze brushes, moldable silicone, diamond-coated tweezers

Dentsply CEREC Tessera CAD/CAM Blocks Size C14 MT A3 -Pack 4

Dentsply Sirona CEREC Tessera HT, A1, C14 (5365431205)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, A2, C14 (5365431215)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, A3, C14 (5365431225)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, A3.5, C14 (5365431235)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, A4, C14 (5365431295)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, C1, C14 (5365431295)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera HT, D2, C14 (5365431335)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, A1, C14 (5365431505)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, A3.5, C14 (5365431535)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, B1, C14 (5365431555)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, B3, C14 (5365431575)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, C1, C14 (5365431595)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, C3, C14 (5365431615)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT, D2, C14 (5365431635)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Sirona CEREC Tessera MT/LT, BL2, C14 (5365431675)

CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry.  One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate.  CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time.  Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation.  Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth.    Indications One block, many uses: Single-unit full contour crowns  Inlays Onlays  Veneers  Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14 

Dentsply Universal Spray Glaze with fluorescent (5368273100)

Each.Glaze and Firing Accessories for the CAD/CAM Procedure.

Eurodontic Bioplast Size 2.0 x 125 (3185) - Pack10

Pack (10). BIOPLAST. Bleach Tray material clear. Soft, pliable rubber material. Does not bond to acrylic. Application: model duplications,mouth protection (sports),night guards, positioner, bleaching splints.

GC CERASMART270 CEREC HT A1 Size 14 (10001413) Pack 5

Pack (5)   Force absorbing hybrid ceramic CAD/CAM Block.   CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties.   With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition.   The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice.   Indications:-   Metal free indirect restorations: full crown, inlay, onlay, laminated veneer Implant supported crown The High Translucency (HT) blocks are mainly used to replace enamel: inlays, onlays, veneers, partial and full crowns.   The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.

GC CERASMART270 CEREC HT A2 Size 14 (10001414) Pack 5

GC CERASMART270 CEREC HT A3 Size 14 (10001415) Pack 5

Pack (5)   Force absorbing hybrid ceramic CAD/CAM Block.   CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties.   With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition.   The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice.   Indications:-   Metal free indirect restorations: full crown, inlay, onlay, laminated veneer Implant supported crown The High Translucency (HT) blocks are mainly used to replace enamel: inlays, onlays, veneers, partial and full crowns.   The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.

GC CERASMART270 CEREC LT A1 Size 14L (10001440) - Pack 5

GC CERASMART270 CEREC LT A2 Size 14L (10001441) - Pack 5

GC CERASMART270 Universal Size 14 HT A1 (10001424) - Pack5

Pack (5).CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties.With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition.The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice.

GC Initial LiSi Block Aesthetic Kit (10007322) - Each

Each.GC Initial LiSi Block, CEREC, Size 14, A1 HT GC Initial LiSi Block, CEREC, Size 14, A2 HT       GC Initial LiSi Block, CEREC, Size 14, A2 LT                                GC Initial LiSi Block, CEREC, Size 14, A3 HT GC Initial LiSi Block, CEREC, Size 14, A3 LT                    GC Initial IQ, Lustre Paste ONE, Lustre Paste Neutral, L-NFL,4g    GC Initial IQ, Lustre Paste ONE, Lustre Body Shade A, L-A,4g        GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade 3, L-3,4g    GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade 2, L-2,4g     GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade OP, L-OP,4g GC Initial IQ, Lustre Paste ONE/NF, Diluting Liquid, 8ml     GC Initial IQ, Lustre Paste ONE/NF, Refresh Liquid, 8ml     GC Initial Brush 00 LP     GC Initial Brush 02 LP     Mixing DishInitial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A1 HT (10004844) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A1 LT (10004887) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A2 HT (10004956) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A2 LT (10004958) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A3 HT (10004957) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC Size 14 A3 LT (10004888) - Pack5

Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.

GC Initial LiSi Block CEREC, Size 14, BL (10037275) - Pack 5

Hager Werken Occlu Spray Plus Green 75ml (554205) - Each

Each.High-quality green occlusion spray•For marking of contact points by direct spraying onto the occlusal surfaces•Micro powder layer for highest accuracy•Plastic nozzle for extra fine spray mist•Powder layer can be easily removed with water•Economic in consumption

Ivoclar Vivadent IPS e.max CAD CEREC/inLab A14 LT A3.5 (S)/5

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A1 B40L/3

Pack (3). 648870 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A1 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A1 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40/3

Pack (3). 634587 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40L/3

Pack (3). 648871 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 B40/3

Pack (3). 634588 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 B40L/3

Pack (3). 648942 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3.5 B40L/3

Pack (3). 648943 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3.5 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3.5 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A4 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A4 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B1 B40L/3

Pack (3). 648945 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B1 C14/5

Pack (5). IPS e.max CAD inLab HT Blocks are highly translucent and used to machine minimally invasive full-contour restorations, for example, inlays, onlays and veneers. These restorations are subsequently characterized with staining materials. HT Blocks in the size B40 are available for the IPS e.max CAD-on technique. Efficient, economical processing due to easy machinability. High strength (360 MPa) and high level of esthetics. Fabrication of a crown in one hour. Minimally invasive restorations. Adhesive, self-adhesive and conventional cementation. Fabrication of a complete zirconium oxide-based bridge in one day.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B1 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B2 B40L/3

Pack (3). 648946 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B2 C14/5

Pack (5). IPS e.max CAD inLab HT Blocks are highly translucent and used to machine minimally invasive full-contour restorations, for example, inlays, onlays and veneers. These restorations are subsequently characterized with staining materials. HT Blocks in the size B40 are available for the IPS e.max CAD-on technique. Efficient, economical processing due to easy machinability. High strength (360 MPa) and high level of esthetics. Fabrication of a crown in one hour. Minimally invasive restorations. Adhesive, self-adhesive and conventional cementation. Fabrication of a complete zirconium oxide-based bridge in one day.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B3 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B3 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B4 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B4 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL1 C14/5

Pack (5). 626427 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL2 B40L/3

Pack (3). 648957 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL2 C14/5

Pack (5). 626428 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL3 C14/5

Pack (5). 626429 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL4 C14/5

Pack (5). 626430 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C1 B40L/3

Pack (3). 648949 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C1 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C1 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C2 B40L/3

Pack (3). 648950 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C2 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C3 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C3 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C4 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C4 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D2 B40L/3

Pack (3). 648953 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D2 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D2 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D3 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D3 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D4 C14/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D4 I12/5

Pack (5). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 (S) A14/5

Pack (5).678784IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 (S) A16/5

Pack (5).644367IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 B32/3

Pack (3). 648204 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 C16/5

Pack (5). 648188 IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (L) A16/5

Pack (5). 644385 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A14/5

Pack (5). 678785 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A16/5

Pack (5). 644368 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 B32/3

Pack (3). 648205 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 (L) A16/5

Pack (5). 644386 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 (S) A14/5

Pack (5).678866IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 B32/3

Pack (3). 648206IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3.5 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3.5 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A4 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A4 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 (S) A14/5

Pack (5).678868IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 B32/3

Pack (3). 648209 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B3 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B3 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B4 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B4 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT BL1 C14/5

Pack (5). 605343 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT BL2 C14/5

Pack (5). 605344 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT BL3 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT BL4 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C1 B32/3

Pack (3). 648213 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C1 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C1 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C3 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C3 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C4 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C4 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D2 B32/3

Pack (3). 648217 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D2 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D2 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D3 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D3 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D4 C14/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D4 I12/5

Pack (5). IPS e.max CAD LT (Low Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A1

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A2

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A3

Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT B1

Pack (5). 680031 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL2

Pack (5). 680032 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL3

Pack (5). 680033 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL4

Pack (5). 680034 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns

Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C16 LT A2

Pack (5)   IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).   The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.   Veneers Partial crowns Crowns Bridges Hybrid abutment crowns

Ivoclar Vivadent IPS e.max CAD Crystall./ Glaze Spray 270ml

Each. 605364 Special glaze spray to be applied on restorations once IPS e.max CAD Crystall Shades and Stains have been applied. The restorations are fired in a combined crystallisation and glaze firing cycle

Ivoclar Vivadent IPS e.max CAD Crystall./Add-On Liquid 15ml

Each.  All round Liquid For adjustments, such as proximal or occlusal contact points. These adjustments can be made directly with the crystallization firing or in a subsequent corrective firing cycle.

Ivoclar Vivadent IPS e.max CAD Crystall./Glaze Liquid 15ml

Each.  For adjustments, such as proximal or occlusal contact points. These adjustments can be made directly with the crystallization firing or in a subsequent corrective firing cycle.

Ivoclar Vivadent IPS e.max CAD Crystall./Glaze Paste 3g

Each. Special glaze paste which has been developed for use with fully anatomical IPS e.max CAD restorations.

Ivoclar Vivadent IPS e.max CAD Crystall./Shade 1 3g

Each.  The dentin materials IPS e.max CAD Crystall./Shades are supplied in paste form. They are optimally matched to the CAD/CAM materials.

Ivoclar Vivadent IPS e.max ZirCAD CER/inLab LT A2 C17/5

Pack (5). 686194 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B1

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B2

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC Size C14 Multi A3.5

Pack (5)   Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.   Multi Blocks – Lifelike transition of shade, translucency and fluorescence. Indications: anterior and posterior crowns, partial crowns & veneers.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab HT A2 I12/5

Pack (5). 602521 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.HT Blocks – higher translucency and chameleon effect. Lower brightness values. Indications: inlays, onlays and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A1 C14/5

Pack (5). 602567 The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1-BL4). Multi blocks. The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and the E4D* Dentist System (D4D). Advantages Twenty years of clinical experience with more than 40 million seated restorations. Leucite glass-ceramic (160 MPa) for exceptional esthetics. Comprehensive shade and size range for every patient situation. Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient. Polishing with OptraFine – no glazing necessary. Indications: Veneers, inlays, onlays, anterior and posterior crowns.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A2 C14/5

Pack (5). The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A3 C14/5

Pack (5). The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A3 I12/5

Pack (5). 602559 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A3.5 I12/5

Pack (5). 602560 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 C14/5

Pack (5). 602598. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 C14L/5

Pack (5). 602604. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A1 I12/5

Pack (5). 602592. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14/5

Pack (5). 602599. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 C14L/5

Pack (5). 602605. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A2 I12/5

Pack (5). 602593. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A3 C14/5

Pack (5). 602600 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi A3 I12/5

Pack (5). 602594 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14/5

Pack (5). 607683 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14L

Pack (5). 607672 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14/5

Pack (5). 607684 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14L

Pack (5). 607673 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa.  Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance.  IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns

Ivoclar Vivadent IPS Natural Die Material Shade Guide - Each

Each. Die shade selection In order to facilitate the reproduction of the desired tooth shade, the shade of the preparation is determined with the help of the IPS Natural Die Material shade guide. This enables the technician to fabricate a model die similar to the preparation of the patient, on the basis of which the correct shade and brightness values of the all-ceramic restoration may be selected.

Ivoclar Vivadent IPS Object Fix Flow 10ml (605525) - Each

Each. IPS Object Fix Flow and Putty are auxiliary firing pastes with different viscosities to support all-ceramic restorations during firing and crystallization. The pastes are used to stabilize and secure the restorations on the silicon nitride support pins or directly on the silicon nitride firing tray. They can be easily applied and later removed after the firing procedure.

Ivoclar Vivadent ProBase Cold Monomer 500ml (531505) - Each

Each.The cold-curing ProBase Cold is suitable for both the pouring and the packing technique. Its excellent properties ensure long-lasting denture bases.ProBase Cold is characterized by its outstanding flow and moulding properties. The material complies with ISO EN 20795-1.AdvantagesEasy to use and accurateStability of shape and colourIndicationsRepairs of conventional and implant denturesPartial and combination denturesRelinesComplete dentures

Ivoclar Vivadent ProBase Cold Polymer 2x500g Preference

Pack (2). 563542 The cold-curing ProBase Cold is suitable for both the pouring and the packing technique. Its excellent properties ensure long-lasting denture bases. ProBase Cold is characterized by its outstanding flow and moulding properties. The material complies with ISO EN 20795-1. Advantages Easy to use and accurate Stability of shape and colour Indications Repairs of conventional and implant dentures Partial and combination dentures Relines Complete dentures

Ivoclar Vivadent ProBase Cold Polymer 500g Clear (531511)

Each.The cold-curing ProBase Cold is suitable for both the pouring and the packing technique. Its excellent properties ensure long-lasting denture bases.ProBase Cold is characterized by its outstanding flow and moulding properties. The material complies with ISO EN 20795-1.AdvantagesEasy to use and accurateStability of shape and colourIndicationsRepairs of conventional and implant denturesPartial and combination denturesRelinesComplete dentures

Ivoclar Vivadent ProBase Cold Polymer 500g Pink (531508)

Each.The cold-curing ProBase Cold is suitable for both the pouring and the packing technique. Its excellent properties ensure long-lasting denture bases.

Kemdent Special Tray Blanks Plain Extra Large Uppers - Box72

Box (72). Kemdent Shellac Special Tray blanks are a firm favourite with Dentists and Technicians. Easily adapted to produce individual custom trays for the most accurate impressions.

Laminate - Bleach Tray 3mm (BB64) - Box25

Box (25). Can be used for the Essix technique. Available in sizes 4 mm.

Metrodent Retainer Material 0.75mm (P221-004) - Pack 10

Pack of 10 x 0.75mm. Clear. 5 x 5 inches (125 x 125mm).

Pascal Hydent Indicator Spray 30g (05-100) - Each

Each. Denture high spot indicating paste. Fast - Apply to denture with the touch of a button. Accurate - Pressure points are clearly defined. Even application with aerosol spray. Easily cleaned from denture. Sanitary - Greatly reduces risk of cross contamination. No messy brushes. Mint flavour. Contains no CFCs Makes rechecking for high spots quick and simple

Pro-form Single Colour EVA 4mm White (P110-8WH) - Pack10

Pack of 10 x 4mm, White, Soft EVA sheets, economical and versatile.   5 x 5 inches (125 x 125mm).

Sirona CEREC Optispray (6144179)

Stoddard Calico Mops - Pack5

Pack (5). Polishing Wheel-Leather Center. Use For: Laboratory only. Acrylics.

VITA Enamic Block 1M1-HT-EM-14 - Pack5

Pack (5) VITA ENAMIC is the first dental hybrid ceramic in the world with a dualnetwork structure. In this dental material, the dominant ceramic network is strengthened by a polymer network, with both networks fully integrated with one another. In addition to a high degree of elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding. Features/Benefits Practices/ laboratories benefit from: enormous load capacity since masticatory forces are absorbed reduction of wall thickness possible to achieve restorations that are gentle on oral substance highly precise and particularly accurate results fast and effi cient CAM fabrication tooth-like material properties

VITA Enamic Block 1M2-HT-EM-10 - Pack5

Pack (5) VITA ENAMIC is the first dental hybrid ceramic in the world with a dualnetwork structure. In this dental material, the dominant ceramic network is strengthened by a polymer network, with both networks fully integrated with one another. In addition to a high degree of elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding. Features/Benefits Practices/ laboratories benefit from: enormous load capacity since masticatory forces are absorbed reduction of wall thickness possible to achieve restorations that are gentle on oral substance highly precise and particularly accurate results fast and effi cient CAM fabrication tooth-like material properties

VITA Enamic Block 1M2-HT-EM-14 - Pack5

Pack (5) VITA ENAMIC is the first dental hybrid ceramic in the world with a dualnetwork structure. In this dental material, the dominant ceramic network is strengthened by a polymer network, with both networks fully integrated with one another. In addition to a high degree of elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding. Features/Benefits Practices/ laboratories benefit from: enormous load capacity since masticatory forces are absorbed reduction of wall thickness possible to achieve restorations that are gentle on oral substance highly precise and particularly accurate results fast and effi cient CAM fabrication tooth-like material properties

Voco Block Out Gel LC 4x1.2ml (1661) - Box4

Box (4) . Light-curing block out material . Indications:- Blocking out of plaster models . Advantages:- Blue colour for simple application control . Easy application directly from the syringe.

Voco Grandio blocs No.12 A1 HT (6012) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco Grandio blocs No.12 A2 HT (6013) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco Grandio blocs No.14L A1 HT (6027) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

Voco Grandio blocs No.14L A2 HT (6028) - Pack5

Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns

WhipMix Vacuum Investor Plastic Trap Filter & Spring - Each

Each.