Dentsply CEREC Tessera Block Starter Kit (5365430113)
Each.CEREC Tessera - Advanced Lithium Disilicate (ALD)For single-visit indirect restorations, clinicians have grown accustomed to making trade-offs. Effiency versus esthetics. Esthetics versus strength. These trade-offs force unwanted decisions—from not using stains in order to fire faster to complicating inventory and processing protocols by keeping two or more block materials in stock.Now, there's one Choice for Beauty, Strength and Speed without unwanted Trade-Offs: CEREC Tessera CAD/CAM blocks provide outstanding esthetics for a truly tooth-like restoration.Up to 32% higher biaxial strength for restoration longevity.And up to 44% faster total processing time for greater patient satisfaction and a more profitable procedure.Speed, strength, and esthetics. It’s the trifecta for single-visit successContains 2 each: A1 (MT), A2 (MT & HT), A3 (MT & HT), A3.5 (MT). Honeycomb & firing pads, investment pins, overglaze & glaze liquid, stain/glaze brushes, moldable silicone, diamond-coated tweezers
Dentsply CEREC Tessera CAD/CAM Blocks Size C14 MT A3 -Pack 4
Dentsply Sirona CEREC Tessera HT, A1, C14 (5365431205)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, A2, C14 (5365431215)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, A3, C14 (5365431225)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, A3.5, C14 (5365431235)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, A4, C14 (5365431295)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, C1, C14 (5365431295)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera HT, D2, C14 (5365431335)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, A1, C14 (5365431505)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, A3.5, C14 (5365431535)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, B1, C14 (5365431555)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, B3, C14 (5365431575)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, C1, C14 (5365431595)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, C3, C14 (5365431615)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT, D2, C14 (5365431635)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Sirona CEREC Tessera MT/LT, BL2, C14 (5365431675)
CEREC Tessera™ from Dentsply Sirona is an advanced lithium disilicate offering simple shade selection, fast firing, fast cooling and simplified processing, saving up to 44% total processing time, redefining the possibilities of single-visit dentistry. One choice for beauty, strength and speed without unwanted trade-offs, CEREC Tessera™ advanced lithium disiliate. CEREC Tessera™ blocks achieve exceptional three-way performance through a unique chemistry that incorporates two complimentary crystal structures within a glassy zirconia matrix. These two crystals work together to create an unprecedented fusion of strength and beauty in one block while significantly improving overall processing time. Lithium disilicate: rod-shaped crystals provide strength in the same manner as rebar embedded in cement. These crystals increase the density of the material while helping protect against crack propagation. Virgilite: Used in glass ceramics, these crystals are unique to CEREC Tessera™ material. They are activated through the matrix firing process and add strength while contributing to the outstanding aesthetics that give the convincing appearance of natural teeth. Indications One block, many uses: Single-unit full contour crowns Inlays Onlays Veneers Contents 4 pack CEREC Tessera™ Medium Translucency, shade A1, size C14
Dentsply Universal Spray Glaze with fluorescent (5368273100)
Each.Glaze and Firing Accessories for the CAD/CAM Procedure.
GC CERASMART270 CEREC HT A1 Size 14 (10001413) Pack 5
Pack (5) Force absorbing hybrid ceramic CAD/CAM Block. CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties. With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition. The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice. Indications:- Metal free indirect restorations: full crown, inlay, onlay, laminated veneer Implant supported crown The High Translucency (HT) blocks are mainly used to replace enamel: inlays, onlays, veneers, partial and full crowns. The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.
GC CERASMART270 CEREC HT A3 Size 14 (10001415) Pack 5
Pack (5) Force absorbing hybrid ceramic CAD/CAM Block. CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties. With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition. The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice. Indications:- Metal free indirect restorations: full crown, inlay, onlay, laminated veneer Implant supported crown The High Translucency (HT) blocks are mainly used to replace enamel: inlays, onlays, veneers, partial and full crowns. The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.
GC CERASMART270 Universal Size 14 HT A1 (10001424) - Pack5
Pack (5).CERASMART270 is developed using the FSC technology, an innovative filler treatment method for homogeneous filler dispersion, having a great impact on physical properties. A stronger bond between the filler and matrix is achieved, together with an increase in filler load, resulting in a stronger material with improved aesthetic properties.With its improved strength and wear resistance, CERASMART270 is on the cutting edge of restorative dentistry. The surfaces remain very smooth and glossy over time, which is not only beneficial for the aesthetic appearance, but also limits the wear of the opposing dentition. The improved breaking energy and flexibility of the material are contributing to buffer the masticatory forces. This makes the material extremely suitable for treatment of the worn dentition.The milling of CERASMART270 is fast and efficient, making it possible to create restorations with precise, fine margins and an optimal fit in a very short time. Additionally, it can easily be polished, saving time and money. When higher aesthetics outcome is desired, the material can easily be glazed and characterised using the wear resistant coating OPTIGLAZE color. The flexibility of CERASMART270 also lies in its ability to be either sandblasted or etched before luting, so that it adapts to every practice.
GC Initial LiSi Block Aesthetic Kit (10007322) - Each
Each.GC Initial LiSi Block, CEREC, Size 14, A1 HT GC Initial LiSi Block, CEREC, Size 14, A2 HT GC Initial LiSi Block, CEREC, Size 14, A2 LT GC Initial LiSi Block, CEREC, Size 14, A3 HT GC Initial LiSi Block, CEREC, Size 14, A3 LT GC Initial IQ, Lustre Paste ONE, Lustre Paste Neutral, L-NFL,4g GC Initial IQ, Lustre Paste ONE, Lustre Body Shade A, L-A,4g GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade 3, L-3,4g GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade 2, L-2,4g GC Initial IQ, Lustre Paste ONE, Enamel Effect Shade OP, L-OP,4g GC Initial IQ, Lustre Paste ONE/NF, Diluting Liquid, 8ml GC Initial IQ, Lustre Paste ONE/NF, Refresh Liquid, 8ml GC Initial Brush 00 LP GC Initial Brush 02 LP Mixing DishInitial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A1 HT (10004844) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A1 LT (10004887) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A2 HT (10004956) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A2 LT (10004958) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A3 HT (10004957) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC Size 14 A3 LT (10004888) - Pack5
Pack (5).Initial LiSi Block is a fully crystallized lithium disilicate block that delivers optimal physical and aesthetic properties without firing. This unique block features GC’s proprietary High Density Micronisation (HDM) technology for CAD/CAM dentistry to deliver high wear resistance, smooth margins and aesthetic final results. This makes it an ideal time saving solution for single visit chairside treatment.The unique ultrafine crystal makes it easy to grind and can be quickly milled in its fully crystallized stage. Thanks to Initial LiSi Block’s exceptional properties, high gloss and natural opalescence can be obtained in few minutes by polishing only and restoration is then ready for luting. The aesthetics of your restoration will be maintained over time.Initial LiSi Block is available in four aesthetic shades and two translucencies. When more characterisation is required, the Initial ceramic line comprises fully synergistic aesthetic solutions.
GC Initial LiSi Block CEREC, Size 14, BL (10037275) - Pack 5
Ivoclar Vivadent IPS e.max CAD CEREC/inLab A14 LT A3.5 (S)/5
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A1 B40L/3
Pack (3). 648870 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40/3
Pack (3). 634587 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A2 B40L/3
Pack (3). 648871 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 B40/3
Pack (3). 634588 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3 B40L/3
Pack (3). 648942 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT A3.5 B40L/3
Pack (3). 648943 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B1 B40L/3
Pack (3). 648945 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT B2 B40L/3
Pack (3). 648946 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL1 C14/5
Pack (5). 626427 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL2 B40L/3
Pack (3). 648957 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL2 C14/5
Pack (5). 626428 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL3 C14/5
Pack (5). 626429 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT BL4 C14/5
Pack (5). 626430 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C1 B40L/3
Pack (3). 648949 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT C2 B40L/3
Pack (3). 648950 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab HT D2 B40L/3
Pack (3). 648953 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 (S) A14/5
Pack (5).678784IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 (S) A16/5
Pack (5).644367IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 B32/3
Pack (3). 648204 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A1 C16/5
Pack (5). 648188 IPS e.max CAD LT (Low Translucency). The blocks are available in 9 A-D, 4 Bleach BL shades and in 2 different sizes (I12, C14). Due to their translucency, they are ideal for fabricating restorations in the staining and cut-back technique. Shading is based on the tried-and-tested shades of IPS Empress CAD LT. The blocks are shaded according to the tooth shade. Thus, staining and veneering is reduced to a minimum.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (L) A16/5
Pack (5). 644385 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A14/5
Pack (5). 678785 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 (S) A16/5
Pack (5). 644368 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A2 B32/3
Pack (3). 648205 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 (L) A16/5
Pack (5). 644386 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 (S) A14/5
Pack (5).678866IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT A3 B32/3
Pack (3). 648206IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 (S) A14/5
Pack (5).678868IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO).The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns.VeneersPartial crownsCrownsBridgesHybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT B1 B32/3
Pack (3). 648209 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT C1 B32/3
Pack (3). 648213 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab LT D2 B32/3
Pack (3). 648217 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). IPS e.max CAD HT (High Translucency). High strength lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). HT blocks - used for the milling of minimally-invasive, fully anatomical restorations, such as inlays, onlays and veneers.
Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT A1
Pack (5). IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT B1
Pack (5). 680031 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL2
Pack (5). 680032 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C14 MT BL4
Pack (5). 680034 IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The MT blocks are available in the shades A1, A2, A3, B1, BL2, BL3 and BL4. These medium- translucency blocks are used in cases where a brighter look is needed than that imparted by HT blocks and more translucency than with LT blocks. Due to the ideal balance of brightness and translucency, MT blocks are ideally suitable for the fabrication of anterior restorations. Customization is achieved by means of the staining or cut-back technique. Thin veneers and occlusal veneers Veneers Partial crowns Crowns
Ivoclar Vivadent IPS e.max CAD CEREC/inLab Size C16 LT A2
Pack (5) IPS e.max is a high strength (360 MPa) lithium disilicate glass-ceramic (LS2) for the CAD/CAM technique directly in the dental office (chairside) or the laboratory (labside). Its indication spectrum includes inlays/onlays, thin veneers, occlusal veneers, crowns, anterior/premolar bidges, implant superstructures as well as hybrid abutments and hybrid abutment crowns. In the fabrication of long-span bridges - also for the posterior region - IPS e.max CAD veneering structures are used in combination with zirconium oxide frameworks. IPS e.max CAD blocks are available in four levels of translucency (HT, MT, LT MO). The LT blocks are available in 16 A-D and 4 Bleach BL shades. Their low translucency – similar to that of natural dentin – renders these blocks suitable for creating large restorations (e.g. posterior crowns). The material exhibits true-to-nature brightness and chroma, which prevents the restoration from looking grey. The esthetic appearance of the restoration is maximized with the cut-back technique. The abutment blocks with a prefabricated connection are used for the creation of hybrid abutments and hybrid abutment crowns. Veneers Partial crowns Crowns Bridges Hybrid abutment crowns
Ivoclar Vivadent IPS e.max CAD Crystall./ Glaze Spray 270ml
Each. 605364 Special glaze spray to be applied on restorations once IPS e.max CAD Crystall Shades and Stains have been applied. The restorations are fired in a combined crystallisation and glaze firing cycle
Ivoclar Vivadent IPS e.max ZirCAD CER/inLab LT A2 C17/5
Pack (5). 686194 IPS e.max ZirCAD involves a quick sintering process, which allows monolithic and esthetically pleasing zirconia restorations to be created directly in the dental practice using an efficient procedure. This makes this popular restorative material also suitable for chairside applications. IPS e.max ZirCAD is known for its high flexural strength (1,200 MPa*) and fracture toughness. It allows the fabrication of restorations with considerably lower wall thicknesses (posterior crowns: minimum 0.6 mm; anterior crowns: minimum 0.4 mm). Preparations preserve tooth structure and restorations can be cemented conventionally. Glazing is achieved with IPS e.max CAD Crystall./Glaze, which is available in two versions, one with fluorescent effect and one without. Processing Options Once sintered, the restorations can either be: glazed and fired stained (optional), glazed and fired polished Indications:- Crowns Three-unit bridges Your Benefits:- Chairside zirconia restorations allow practices to expand their portfolio of offerings Pleasing esthetics combined with high strength Tooth-preserving preparation and conventional cementation No risk of chipping Biocompatibility (*Average biaxial flexural strength. Ivoclar Vivadent AG, Schaan, Liechtenstein) The LT blocks are monochromatic, pre-shaded and are available in 7 A–D shades (A1, A2, A3, B1, B2, C2, D2) as well as 1 Bleach (BL) shade and in block sizes C17 and B45.
Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B1
Pack (5) Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.
Ivoclar Vivadent IPS Empress CAD CEREC Size C14 LT B2
Pack (5) Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.
Ivoclar Vivadent IPS Empress CAD CEREC/inLab HT A2 I12/5
Pack (5). 602521 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented.HT Blocks – higher translucency and chameleon effect. Lower brightness values. Indications: inlays, onlays and veneers.
Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A1 C14/5
Pack (5). 602567 The tried-and-tested IPS Empress CAD leucite glass-ceramic combines the modern CAD/CAM processing technology with a high-performance all-ceramic material. IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. HT/LT blocks. Always choose the correct block for your individual patient cases from the comprehensive range. IPS Empress CAD blocks are available in two translucency levels (HT and LT) and as polychromatic Multi blocks. They are available both in Chromascop shade groups and in A-D shades. Moreover, the IPS Empress CAD LT blocks are available in 4 light and modern Bleach shades (BL1-BL4). Multi blocks. The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and the E4D* Dentist System (D4D). Advantages Twenty years of clinical experience with more than 40 million seated restorations. Leucite glass-ceramic (160 MPa) for exceptional esthetics. Comprehensive shade and size range for every patient situation. Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient. Polishing with OptraFine – no glazing necessary. Indications: Veneers, inlays, onlays, anterior and posterior crowns.
Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A3 I12/5
Pack (5). 602559 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.
Ivoclar Vivadent IPS Empress CAD CEREC/inLab LT A3.5 I12/5
Pack (5). 602560 Suitable for the fabrication of all-ceramic inlays, onlays, veneers, and crowns by means of CAD/CAM. They are available in two levels of translucency (high and low) as well as a polychromatic IPS Empress CAD Multi Block. IPS Empress CAD restorations are finally either only polished or stained and glazed, and adhesively cemented. LT Blocks – lower translucency and chameleon effect. Higher brightness value. Indications: anterior and posterior crowns, partial crowns and veneers.
Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14/5
Pack (5). 607683 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns
Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL1 C14L
Pack (5). 607672 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns
Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14/5
Pack (5). 607684 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns
Ivoclar Vivadent IPS Empress CAD CEREC/inLab Multi BL3 C14L
Pack (5). 607673 IPS Empress CAD is excellently suitable for the fabrication of highly esthetic monochromatic single-tooth restorations, such as veneers, inlays, onlays, anterior and posterior crowns. With its homogeneity and light scattering behaviour, IPS Empress provides a balanced chameleon effect. In addition of the light-optical properties, IPS Empress CAD restorations are distinguished for their lifelike translucency, high esthetics, and a flexural strength of 160 MPa. Multi blocks The innovative polychromatic IPS Empress CAD Multi Blocks result in restorations which are distinguished for a true-to-nature shade and fluorescence transition from dentin to incisal, even without characterization. They thus provide maximum esthetics and true-to-nature appearance. IPS Empress CAD blocks can be milled in both theCEREC* System (Sirona) and Chairside CAD/CAM system from Planmeca. Advantages Twenty years of clinical experience with more than 40 million seated restorations Leucite glass-ceramic (160 MPa) for exceptional esthetics Comprehensive shade and size range for every patient situation Choice of true-to-nature chameleon effect, lifelike brightness value or natural shade gradient Polishing with OptraFine – no glazing necessary Indications Veneers, inlays, onlays, anterior and posterior crowns
Voco Grandio blocs No.12 A1 HT (6012) - Pack5
Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns
Voco Grandio blocs No.12 A2 HT (6013) - Pack5
Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns
Voco Grandio blocs No.14L A1 HT (6027) - Pack5
Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns
Voco Grandio blocs No.14L A2 HT (6028) - Pack5
Pack (5).Nano-ceramic hybrid CAD / CAM block•Highest filler content (86 % w/w)•Resembles natural teeth perfectly•Excellent physical values for flexural strength and abrasion•No firing required•Can be processed using any conventional milling unit•Can be polished and repaired optimally•Ideal for grinding even in cases with thin edges•Based on the nano-hybrid technologyIndications•Crowns, inlays, onlays, veneers•Implant supported crowns